SeeYing Belt-Drive Turntable System

Safety Instructions

Read and understand this entire manual before using this product. Keep these instructions for future reference.

1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician.
4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.
5. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
7. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
9. Do not use attachments not recommended by the product manufacturer as they may cause hazards.
10. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings.
12. Unplug the product during lightning storm or when unused for long periods of time.
13. This product can be used only in countries where the product is sold. Make sure that the operating voltage and the plug of the AC adapter of the product are correct for the country you live in.

Items in Package

Before throwing away any packaging materials, please check thoroughly and make sure you find the following items that come along with this package:

• Turntable
• Turntable Lid
• Turntable Slip Mat
• Turntable Platter
• 45 RPM adapter
• Tonearm Counterweight
• Drive Belt
• RCA Audio Cable
• Ground Wire
• Power Cord
• User Manual

Please contact SeeYing official customer service if there is any accessory missing from the package. Please retain the original packaging materials for exchange or return purposes.

Email: seeyinguserservice@outlook.com

Specifications

Turntable Model: SY801

Cartridge: Audio Technica AT-3600L

Note: Design and specifications are subject to change without notice.

Product Description

A diagram shows the top and rear view of the turntable with numbered components.

• 1. Counterweight
• 2. Anti-Skate Control Dial
• 3. Lift Lever
• 4. Tonearm Clip/Rest
• 5. Tonearm
• 6. Pitch Control Knob
• 7. Power Switch & Speed Selector
• 8. Platter
• 9. Phono/Line Switch
• 10. Power Jack
• 11. RCA Out Jacks
• 12. Ground Terminal
• 13. Bluetooth Indicator
• 14. BT Out Switch
• 15. Hinges

Initial Setup

Note: Do not plug the AC power adaptor to power outlet before all the assembly is completed. Before turning the power on, make sure again all the connection settings are correct. Always turn off the power when connecting or disconnecting.

1. Place the unit on a flat and level surface. The selected location should be stable and free from vibration. [Checkmark symbol] [Cross symbol]
2. Install the turntable platter and drive belt accordingly.
   1. Flip the platter. Make sure that the belt is placed in the middle of the platter, as shown in the picture. [Diagram showing belt in the middle position]
   2. Align one of the platter openings with the brass motor pulley, and, while pulling both ends of the red ribbon that comes attached to the belt, place the belt on the motor pulley, as per the diagram. Be careful not to twist the belt. [Diagram showing belt placement on pulley]
   3. Remove the red ribbon from the belt. [Diagram showing ribbon removal]
   4. Rotate the platter slowly 10x in a clockwise direction to seat the belt properly and make sure it turns smoothly. [Diagram showing rotation]
3. Place the slip mat on top of the turntable platter.

4. Rotate the counterweight to align with the scale line after loosening the locking screw, then the needle pressure reaches the factory recommended 3.5g. Tighten the locking screw. [Diagram showing counterweight adjustment with scale]

Note: The counterweight has been preset to the proper stylus pressure at the time of manufacture and does not need to be refitted. Although the tonearm is not balanced, the purpose of adjusting the counterweight is to adjust the needle pressure; rest assured the needle pressure is 3.5g when the counterweight is aligned with the scale line.

The screw for the counterweight only needs to be loosened slightly; please do not remove it completely.

5. Set the Anti-Skate Control Dial to 3.5g.

Note: While the record is playing, a force acts on the stylus tip to pull it inward. This force can be counteracted by setting the anti-skate dial to the same value as the tracking force.

6. Install the turntable lid to the hinges.
7. Connect AC adaptor to the Power Jack of the unit.

Setting Phono/Line Switch

This product has a built-in phono equalizer function. You can use the product, even if you do not have a phono amplifier or connectable equipment with a built-in phono amplifier, by connecting an active speaker, etc. Use the Phono/Line Switch to set the output, as shown below.

Note: Line inputs such as CD, Tuner, Tape, or Video are not suitable for phono input in Phono mode. The RCA Jacks are not designed to be connected directly to a passive speaker in Line mode. If connected to a passive speaker, no sound will come out.

Turntable Operation

1. Press the Power Switch to turn on the power. Rotate the Power Switch to turn on the power and select the desired speed according to the record. (33 1/3 or 45 RPM)
2. Place the record on the turntable. Use the 45 RPM Adapter if necessary.
3. Remove the stylus protector from the stylus assembly. [Note: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being moved or cleaned.]
4. Release the tonearm Hold Down Clip. [Note: when the turntable is not in use, remember to lock back hold down clip.]
5. Use the Cue Lever to lift up the tonearm.
6. Gently move the tonearm over the record where play is desired to begin. Set the Cue Lever back to the down position; the tonearm will descend slowly onto the record and begin to playback. [Note: Don't use your hand to directly remove the cartridge during playback to avoid scratching the record or the cartridge during operation.]
7. If desired, turn the Pitch Control Knob to adjust the pitch. (±10% pitch variation)

Bluetooth Operation

This turntable has a Bluetooth transmitter to wirelessly send audio to a Bluetooth speaker or Bluetooth headphones.

1. Power on the turntable and press the BT Out Switch to ON. The Bluetooth Indicator will flash in blue color.
2. Turn on your Bluetooth speaker and ensure it is in pairing mode.
3. This turntable will connect to the nearest Bluetooth speaker. If the connection is successful, the indicator light will stop flashing and become solid.
4. Turn the volume control knob of the speaker to adjust the volume.
5. To disconnect pairing, power off the turntable or turn off Bluetooth pairing on your Bluetooth speaker. The Bluetooth Indicator will be off.

Note: The initial connection may take longer. After a successful connection, the subsequent connection time will be shortened. Please be patient and wait.

Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the turntable mat or a record's edge.
2. Clean the stylus frequently with a soft brush with a back-to-front motion only. [Diagram showing correct stylus cleaning motion] [Cross symbol for incorrect motion]
3. Clean the records to get rid of dust or grease with a record cleaning brush and record cleaning solution.
4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber cloth. [Note: Do not use cleanser that contains alcohol, benzene or any other harsh chemicals, which might damage the paint and finish of the turntable.]
5. The belt is a consumable part. Replace the belt if the speed of playback slows down or irregular rotation occurs. As a rule of thumb, we suggest replacing the belt once a year. [Note: Before replacing the belt, be sure to disconnect the product's AC adapter from the outlet.]

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle. [Diagram step 1]
2. Pull needle forward. [Diagram step 2]
3. Pull out and remove. [Diagram step 3]

Installing Needle

1. Position the needle with its tip facing down. [Diagram step 1]
2. Line up the back of the needle with the cartridge. [Diagram step 2]
3. Insert the needle with its front end at a downward angle and gently lift the front of the needle upward until it snaps into place. [Diagram step 3]

When the Turntable is Moved

Using the product's original packing materials, wrap the turntable in the reverse order from when you unwrapped it. If you do not have the packaging materials, take the following measures:

• Remove the felt mat and platter, and then wrap them. If the product is moved while the platter is still seated, it may damage the spindle.
• Fix the tonearm to the Tonearm Rest and attach the protector to the cartridge.
• Wrap the turntable body with a soft cloth so that it does not get damaged.

Troubleshooting

Note: If the above do not solve your problem, please don't hesitate to send us a related video and your order number to the Service Email below and we are more than happy to help you fix it.

Service Email

Service Email: seeyinguserservice@outlook.com

Any questions or tech support requirements, please contact us by email.