Your NVR can record video from an IP camera with an Internet connection. Follow steps 1-3, above before proceeding with the instructions, below: 1. Download ...
IP Camera manual from www.Q-See.com/Support. 2. Obtain the camera’s IP address following the instructions in the manual. 3. On your NVR
Q-SEE QT878-2 645439252271 0645439252271 1002299284
QT11
quick-start
GUIDE
QT SERIES HD NVRS
FREEDOM
Test cameras and connections prior to mounting.
If specialty camera(s), such as a PTZ, are included in your package, please review instructions for specialty camera(s) before proceeding to Step 1.
STEP 1 CONNECT YOUR CAMERAS
A
Plug the CAT5E Extension Cable into the camera's network port.
B
Plug the other end of the Extension Cable into one of the POE ports on the back of the NVR.
C
Repeat steps A & B for each camera.
To add remote cameras to your NVR, see the end of this guide.
EXTENSION CABLE
A
B
ALARM IN 15 13 11 9 7 5 3 1
GND
RS485
K/B AB
IP CAMERA
2
4
6
8
COM NO
GND
16 14 12 10 8 6 4 2
HDMI
ALARM OUT
CVBS
VGA
LAN USB
1
3
5
7
VIDEO IN POE PORTS
NOTE: Your NVR model may differ from that shown in this illustration.
When doing final installation, connect your cameras one at a time. The NVR will assign cameras a channel in the order that they are connected.
STEP 2 CONNECT TO VIDEO DISPLAY
Choose video display option A or B:
ALARM IN 15 13 11 9 7 5 3 1
ALARM IN 15 13 11 9 7 5 3 1
GND GND
OPTION
RS485 K/B
OPTION A B RS485 K/B AA A B
OPTION
OPBTIBON
2
4
2
4
6
COM COM
NO
NO GND
GND
16 14 12 10 8 6 4 2 16 14 12 10 8 6 4 A2LARM OUT
HHDDMMII
ALARM OUT
CCVBVSBS
VGAVGA
LAN
LANUSB
USB 1
1 3
3 5
NOTE: Your NVR model may differ from that shown in this illustration.
OPATIOONPATION
OPBTIOONPBTION VGAVGA
OORR
19"+
19"+
ALARM IN 15 13 11 9 7 5 3 1
GND
RS485
K/B AB
STEP STEP
34
2
4
6
8
6 16 14 12 10 8 6 4 2
ALARM OUT
COM NO
GND
HDMI
CVBS
VGA
LAN USB
1
3
5
7
STEP 3 CONNECT TO ROUTER
5
A. Plug the included Network (Ethernet) cable into
the Network port 3 on the back of the NVR.
B. Connect the other end of the cable to an open port on your router (not included).
RJ45 Ethernet Cable
Before starting the NVR, download the free QC View App (for mobile phones) or QC View HD App (for tablets) from your device's app store.
STEP 4 CONNECT MOUSE
Plug the mouse into the USB port 4 on the back of the NVR.
NOTE: The USB port on the front of the NVR is used for backing up video files.
OPTION A HDMI
A. Plug the included HDMI cable into the NVR's HDMI port.
B. Connect the other end of the HDMI cable to the monitor or TV.
C. Plug the monitor or TV into a surge protector.
OPTION B VGA MONITOR
A. Plug a VGA cable (not included) into the NVR's VGA port.
B. Connect the other end of the VGA cable to the monitor.
C. Plug the monitor into a surge protector.
STEP 5 TURN ON NVR
A. Plug the NVR power adapter into the power port on the back of the NVR.
B. Plug the power cable into a surge protector. C. Turn on the NVR's power switch. The NVR will beep as it powers up.
AB
NOTE: This is the highest quality viewing option
NOTE: The monitor must me 19" or larger
The Start Up Wizard will appear on-screen after a few minutes.
STEP 6 START UP WIZARD
When the startup wizard appears, follow the on-screen instructions to complete the NVR setup and connect to the internet using Q-See's Scan N' View service.
WIZARD GLOSSARY
DST (Daylight Savings Time): Set DST to change where applicable. Click Set to enter the start and end dates. Make sure the box is checked.
NTP (Network Time Protocol): Maintains the accuracy of the DVR's clock. Check the box to turn on.
Language: This is the language the NVR will use. NOTE: If a new language is selected, the NVR will restart. The wizard will continue in English but menus will be in the selected language.
Local IP Address (LAN): The NVR's address on the network. Write the address on the line below. To access the NVR from a computer on the same network, enter this address into the web browser.
To complete setup, launch QT View App on your mobile device.
Local Address (LAN):____________________________________________
To prevent the wizard from running again, uncheck the startup option.
Q-SEE QT VIEW ON YOUR COMPUTER
To access your DVR over the Internet on a computer (Mac or PC) go to www.QTView.com
A. Enter your NVR's serial number (from the QR code screen or on the label on the NVR's case).
B. Enter the User Name and Password you created in the Startup Wizard
C. Select language D. Click on Login to begin viewing your
cameras.
STEP 7 QT VIEW MOBILE APP
To view cameras, you need to add your DVR to the app.
A. Tap on the QR Code Scan icon B. When the QR code has been scanned, the app will return
to the Login Screen. C. The DVR's ID will appear in the SN section. Enter the
Account (User Name) and Password that you created in the Startup Wizard. D. Tap Login to begin viewing your cameras.
C
D
A
QT VIEW GLOSSARY
SN: This is the DVR's serial number. It appears on the label with the QR code, in the QR code window and in the Startup Wizard.
Account: Your User Name ("admin" is the default user name)
Password: Password selected during DVR setup ("123456" is the default password)
When you can view live video from the cameras, they are tested and ready to be installed.
STEP 8 REGISTER YOUR PRODUCT
Register NOW at www.Q-See.com/Register to be eligible for live Q-See support and product news.
Q-See never shares or sells registration information!
CAMERA TROUBLESHOOTING
If you do not see video from a camera: 1. Check to ensure that the camera is connected to a Video-In port. 2. Connect the camera to a different video-in port to determine if the problem is with
a camera or a cable. Switch one element (camera, or cable) at a time to isolate the problem. 3. If the camera is connected through a router or POE, try a different port.
HELP AND ADVANCED SETTINGS
· Most problems can be solved online via our 24/7 knowledge base at www.Q-See.com/Support
· Live chat is available M-F 6am to 7pm and from 9am to 5pm on weekends. All times are PST.
TIPS FOR INSTALLING CAMERAS
When installing the cameras, the optimal placement depends on each unique situation. The green areas shown in the illustration to the right are usually the best locations to mount cameras, but also consider the following:
· Field of view · Accessibility to potential vandalism · Exposure to undesirable weather · Length of camera cable · Proximity to high voltage wires or other
sources of potential electrical interference · Do not place camera behind a window or
other obstruction
Your feedback helps us build better products!
Rate your product at http://q-see.com
Be entered to WIN a $100 gift card!
REMOTE CAMERAS
IP Cameras can connect to an NVR with a network or Internet connection.
You will need: · A network port that is connected to a router. · A POE Injector, such as Q-See's QAPE401. · A CAT5 network cable (to connect injector and network port).
LOCAL NETWORK
PWR 1234
UPLINK
1
2
3
4
UPLINK
Network Port
POE Injectors
If your camera and NVR will be in the same building, they can use the same local network to communicate with each other.
1. Plug the POE Injector into a power outlet. It is recommended that you use a UL-1449 rated surge protector to protect your equipment.
2. Using a CAT5 network cable, connect the data port on the POE Injector to a network port that is connected to an active network (connected to a router).
3. Use the included power/video cable to connect a camera to one of the POE ports.
4. On your NVR: a. Select IP Camera from the Main Menu.
b. Click on Search at the bottom of the Device Manager window.
DEVICE MANAGEMENT
CH
Device Net Address
1
10.151.151.100
None 192.158.0.140
Manufacturer Q-See ONVIF
Product Model 9322M_ONVIF ONVIF
Status Connected Disable
c. Select one or more cameras from the list by checking the box to its left.
d. Click OK to return to the Device Manager window.
e. Select a camera and click Setup.
b 1/1 Add
Setup
Delete
Search
g
Apply
Exit
f. Check the Enable box and click OK.
Repeat e-f for other cameras, if needed
f
g. Click Apply to save before exiting window.
OVER THE INTERNET
Your NVR can record video from an IP camera with an Internet connection.
Follow steps 1-3, above before proceeding with the instructions, below: 1. Download and install either IP Tool (PC) or Smart PSS (Mac and PC) along with the
IP Camera manual from www.Q-See.com/Support. 2. Obtain the camera's IP address following the instructions in the manual. 3. On your NVR:
a. Select IP Camera from the Main Menu. b. Click on Search at the bottom of the Device Manager window. c. Enter the camera's IP address, Server Port (85), User Name (admin) and password
(123456). You can change these using the software you downloaded. d. Check the Enable box and click OK. e. Click Apply to save before exiting window.
Adobe PDF Library 11.0 Adobe InDesign CC 2014 (Windows)