Ubiquiti Inc. UAPXG UniFi Access Point SWX-UAPXG SWXUAPXG uapxg
Quad-Radio 802.11ac Wave 2 Access Point with Dedicated Security
Model: UAP-XG
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi® QuadRadio 802.11ac Wave 2 Access Point with Dedicated Security. This Quick Start Guide is designed to guide you through installation and includes warranty terms.
IMPORTANT: The UAP-XG requires the UniFi Controller v5.7 or higher, available at: www.ubnt.com/download/unifi
Package Contents
UniFi AP XG
Mounting Ceiling Backing Ceiling Screws Keps Nuts
Plate
Plate
(Qty. 4) (Qty. 4)
T-Bar Mounts T-Bar Screws Allen Wall Screws Screw Anchors
(Qty. 2)
(Qty. 2)
Wrench
(Qty. 4)
(Qty. 4)
Quad-Radio 802.11ac Wave 2 Access Point with Dedicated Security
Model: UAP-XG
Release Tool
Cable Feed Plug
Gigabit PoE (50V, 1.2A)*
Power Cord*
Quick Start Guide
*Gigabit PoE and Power Cord are not included with UAP-XG 5-pack
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. It is the professional installer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.
Installation Requirements
· Phillips screwdriver · Drill and drill bit (8 mm for wall mounting or 3 mm for ceiling
tile mounting) · Optional: Drywall or keyhole saw (to cut 18 mm hole for
Ethernet cable feed) · Cat6A UTP cable for indoor installations
Outdoor Installation Requirements
IMPORTANT: The UAP-XG may be installed outdoors under an eave or other protected location. Do not install the UniFi AP in an open environment.
· Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling.
· Cable feed opening must be directed away from the open environment.
· Cable feed must be pointed downwards when wall-mounted. · Shielded Category 6 (or above) cabling should be used
for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.
System Requirements
· Linux, Mac OS X, or Microsoft Windows 7/8/10 · Java Runtime Environment 1.6 (1.8 or newer recommended) · Web Browser: Google Chrome (Other browsers may have
limited functionality.) · UniFi Controller software v5.7 or newer (available at:
www.ubnt.com/download/unifi)
Network Topology Requirements
· A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment)
· A UniFi Cloud Key or management station running the UniFi Controller v5.7 (or newer) software, located either on-site and connected to the same Layer 2 network, or off-site in the cloud or NOC
UAP-XG US-16-XG
UAP-AC-PRO UniFi Switch
LAN
UAP-AC-M-PRO
25
7
59
0.9
7
116
0
msec 200+
LATENCY
7 22 54
2
118
0.2 0.01
0.94 2.33
229 413
0
Mbps 700+
THROUGHPUT
SPEED TEST
Throughput [Mbps]
DOWNLOAD THROUGHPUT & LATENCY
250 200 150 100
50 0 24 HRS
Avg/Max Throughput UPLOAD THROUGHPUT & LATENCY
100 80 60 40 20 0 24 HRS
Throughput [Mbps]
WAN
1 ACTIVE DEVICE Inactive 0 Pending 0
12 HRS 12 HRS
Latency
DEVICES 126 DEVICES
WLAN LAN WAN
CLIENTS
118
7
1172
1
CLIENTS
Motorola Lenovo SamsungE Dell Acer Other
LAN
7 ACTIVE DEVICES Inactive 0 Pending 0
CURRENT SITE Default
USERNAME admin
WLAN
118 ACTIVE DEVICES Inactive 0 Pending 0
DEVICES ON 2.4 GHZ CHANNEL
10
Latency [msec]
8
6
1
2
3
4
5
6
7
8
9
10 11
4
2 0 NOW
DEVICES ON 5 GHZ CHANNEL
10 8 6 4 2 0 NOW
Latency [msec]
36
40
44
48
52
56
60
64
100
104
108
112
116
120
124
128
132
136
140
144
149
153
157
161
165
DEEP PACKET INSPECTION
258
241
220 213
645 GB TRAFFIC
130
110
Network Protocols Streaming Media Web / Web 2.0 File Transfer Social Network Other
582 GB 23.3 GB 22.7 GB 8.47 GB
3.6 GB 5.46 GB
UniFi Hybrid Cloud Install
USG-PRO-4 (DHCP Server)
WAN
25
7
59
0.9
7
116
0
msec 200+
LATENCY
7 22 54
2
118
0.2 0.01
0.94 2.33
229 413
0
Mbps 700+
THROUGHPUT
SPEED TEST
Throughput [Mbps]
DOWNLOAD THROUGHPUT & LATENCY
250 200 150 100
50 0 24 HRS
Avg/Max Throughput UPLOAD THROUGHPUT & LATENCY
100 80 60 40 20 0 24 HRS
Throughput [Mbps]
WAN
1 ACTIVE DEVICE Inactive 0 Pending 0
12 HRS 12 HRS
Latency
DEVICES 126 DEVICES
WLAN LAN WAN
CLIENTS
118
7
1172
1
CLIENTS
Motorola Lenovo SamsungE Dell Acer Other
LAN
7 ACTIVE DEVICES Inactive 0 Pending 0
CURRENT SITE Default
USERNAME admin
WLAN
118 ACTIVE DEVICES Inactive 0 Pending 0
DEVICES ON 2.4 GHZ CHANNEL
10
Latency [msec]
8
6
1
2
3
4
5
6
7
8
9
10 11
4
2 0 NOW
DEVICES ON 5 GHZ CHANNEL
10 8 6 4 2 0 NOW
Latency [msec]
36
40
44
48
52
56
60
64
100
104
108
112
116
120
124
128
132
136
140
144
149
153
157
161
165
DEEP PACKET INSPECTION
258
241
220 213
645 GB TRAFFIC
130
110
Network Protocols Streaming Media Web / Web 2.0 File Transfer Social Network Other
582 GB 23.3 GB 22.7 GB 8.47 GB
3.6 GB 5.46 GB
Internet
Remote Access to UniFi Controller
Sample Network Diagram
All UniFi devices support off-site management controllers. For setup details, see the User Guide on the website: www.ubnt.com/download/unifi
Hardware Overview LED
LED Color White
Status Factory default, waiting to be integrated.
Flashing White Initializing.
Alternating White/Blue
Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place.
Indicates the device has been successfully
Blue
integrated into a network and is working
properly.
This is used to locate an AP.
Quickly Flashing Blue
When you click Locate in the UniFi Controller software, the AP will flash. It will also display the location of the AP on the map.
Steady Blue
Indicates the device is in an isolated state
with Occasional (all WLANs are brought down until an
Flashing
uplink is found).
Ports
Security Slot
FCC ID: SWX-UAPXG Contains FCC ID: SWX-M442G Contains FCC ID: SWX-M445GL Contains FCC ID: SWX-M445GH
M/N: UAP-XG 802.3bt PoE
IC: 6545A-UAPXG Contains IC: 6545A-M442G Contains IC: 6545A-M445GL Contains IC: 6545A-M445GH
Reset Button 1 GbE Port
10 GbE Port
Reset The Reset button serves two functions for the UniFi AP:
· Restart Press and release the Reset button quickly. · Restore to Factory Default Settings Press and hold the
Reset button for more than five seconds.
1 GbE The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used to connect the power.
10 GbE The 10 GbE port is a 1/10 Gbps Ethernet port used to connect the power and should be connected to the LAN and DHCP server. For 10 Gbps operation, connect the UAP-XG to an 802.3bt POE switch.
Note: The UAP-XG can also be powered using the included Gigabit PoE adapter. For instructions on using the adapter, see Powering the UniFi AP.
Note: If you need to remove the UniFi AP from the Mounting Plate, insert the included Release Tool in the Security Slot to release the Lock Tab and turn the UniFi AP counterclockwise.
Mounting Plate The Mounting Plate offers a variety of mounting holes for different applications. The legend printed on the Mounting Plate identifies the holes used for each application.
Upgrade from UAP-AC-PRO
The UAP-XG is compatible with the UAPACPRO mounting hardware, so you only need to remove the UAPACPRO and replace it with the UAP-XG. To begin the upgrade: 1. Insert the Release Tool into the UAP-ACPRO Security
Slot to disengage the lock. Then turn the UAPACPRO counterclockwise and lift it off of the mounting bracket.
Security Slot
UAP-AC-PRO (Wall Mount Installation) 2. Unplug the Ethernet cable from the Main port. 3. Go to the Connecting Ethernet section.
Hardware Installation
The UniFi AP can be mounted on a wall, ceiling tile, drop ceiling T-rail (up to 40 mm), or electrical junction box. Perform the steps for the appropriate installation.
Note for UniFi AP replacement: The holes marked "A" on the Mounting Plate line up with the holes of mounting brackets used for previous UniFi AP models. Wall Mount 1. Position the Mounting Plate at the desired location on the wall with the Arrow pointing up. 2. Mark the four mounting holes marked "A", and use an 8 mm drill bit to drill the holes. If your Ethernet cable feeds through the wall, cut or drill a hole approximately 18 mm in diameter. Then feed the CAT6A cable through the hole.
Arrow
Optional 18 mm Hole for Ethernet Cable Feed through the Wall
*640-00341-01* 640-00341-01
3. Insert the Screw Anchors into the holes. Secure the Mounting Plate to the wall by inserting the Wall Screws into the anchors.
4. Go to the Connecting Ethernet section, and then return to step 5.
5. Align the Arrow on the top edge of the UniFi AP with the Arrow on the Mounting Plate.
Arrow
Arrow
Lock Tab
6. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock Tab engages.
Ceiling Mount 1. Remove the ceiling tile. 2. Place the Ceiling Backing Plate in the center of the ceiling
tile. Mark the four mounting screw holes and an 18 mm hole for the Ethernet cable feed.
Optional 18 mm Hole for Ethernet Cable Feed through the Ceiling Tile
3. Use a 3 mm drill bit to drill the screw holes, and cut or drill the 18 mm hole for the Ethernet cable feed.
4. Insert the Ceiling Screws through the Mounting Plate, ceiling tile, and Ceiling Backing Plate. Fasten the screws using the Keps Nuts. Then feed the Ethernet cable through the tile and bracket.
5. Perform the steps in the Connecting Ethernet section, and then return to step 6.
6. Align the Arrow on the top edge of the UniFi AP with the Arrow on the Mounting Plate.
Arrow
Lock Tab
Arrow
7. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock Tab engages.
8. Set the ceiling tile back into place.
T-Bar Mount 1. Remove the ceiling tiles on both sides of the T-bar you will
use for mounting. 2. Loosen the set screws of the T-Bar Mounts.
3. Insert the T-bar into a T-Bar Mount, and turn the T-Bar Mount clockwise to attach it. Use the included Allen Wrench to tighten the two set screws to secure the T-Bar Mount.
4. Attach the second T-Bar Mount but do not tighten the set screws.
5. Use the two dashed lines on the Mounting Plate to space the T-Bar Mounts 77 mm (3") apart. 77 mm
6. Tighten the two set screws on the second T-Bar Mount.
7. Insert the included T-Bar Screws into the holes marked "B" on the Mounting Plate, and then secure the plate to the T-Bar Mounts.
8. Drop the Ethernet cable between the plate and T-bar.
9. Perform the steps in the Connecting Ethernet section, and then return to step 10.
10. Align the Arrow on the top edge of the UniFi AP with the Arrow on the Mounting Plate.
Arrow
Lock Tab
Arrow
11. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock Tab engages.
12. Set the ceiling tiles back into place.
Junction or Outlet Box Mount 1. Use the legend printed on the Mounting Plate to select the
appropriate mounting holes for your installation. 2. Pull the Ethernet cable through the Mounting Plate, and
attach the Mounting Plate to the junction or outlet box using at least two screws (not included).
Note: For in-wall applications, position the Mounting Plate with the Arrow pointing upwards.
3. Perform the steps in the Connecting Ethernet section, and then return to step 4.
4. Align the Arrow on the top edge of the UniFi AP with the Arrow on the Mounting Plate.
Arrow
Arrow
Lock Tab
5. Rotate the UniFi AP clockwise until the tabs lock into place and the Lock Tab engages.
Connecting Ethernet
1. Remove the rubber port cover from the UniFi AP. 2. If the Ethernet cable runs along the mounting surface, skip
to step 3. If the Ethernet cable is fed through the wall or ceiling, insert the Cable Feed Plug.
3. Feed the Ethernet cable through the port cover.
Note: The feed hole will stretch to accommodate the RJ45 connector, and then seal around the cable.
4. Connect the Ethernet cable to the 10 GbE port and replace the port cover. Return to the appropriate instructions.
FCC ID: SWX-UAPXG Contains FCC ID: SWX-M442G Contains FCC ID: SWX-M445GL Contains FCC ID: SWX-M445GH
M/N: UAP-XG 802.3bt PoE
IC: 6545A-UAPXG Contains IC: 6545A-M442G Contains IC: 6545A-M445GL Contains IC: 6545A-M445GH
Powering the UniFi AP
The UAP-XG features auto-sensing 802.3bt PoE support and can be powered by any 802.3bt PoE compliant switch. To power the UniFi AP, connect the Ethernet cable from the UniFi AP directly to a PoE+ port on the switch.
802.3bt PoE Switch
Note: If you do not have an 802.3bt PoE compliant switch, use the included Gigabit PoE adapter to power the UniFi AP as follows: 1. Connect the Ethernet cable from the 10 GbE port of
the UAP-XG to a 10 GbE (or 1 GbE) switch port. 2. Connect an Ethernet cable from the 1 GbE port of
the UAP-XG to the adapter's PoE port. 3. Connect the Power Cord to the adapter's power
port. Connect the other end of the Power Cord to a power outlet.
Software Installation
Download and install the latest version of the UniFi Controller software. Launch it and follow the on-screen instructions. The software and step-by-step instructions in the User Guide are available at: www.ubnt.com/download/unifi After you have installed the software and run the UniFi Installation Wizard, a login screen will appear for the UniFi Controller management interface. Enter the Admin Name and Password that you created and click Log In.
You can manage your wireless network and view network statistics using the UniFi Controller management interface. For information on configuring and using the UniFi Controller software, refer to the User Guide.
Mobile App Installation
Ubiquiti Networks also offers the UniFi mobile app, which is available from the App Store (iOS) or Google PlayTM Store (Android). You can use it to provision a UniFi AP for basic functionality without configuring a UniFi Controller. It also allows seamless provisioning of APs for remote controllers (controllers not on the same Layer 2 network) and easy access to local controllers and those monitored on unifi.ubnt.com
Specifications
Dimensions
Weight without Mount
Networking Interface
Buttons Power Method Max. Power Consumption Supported Voltage Range Max. TX Power
2.4 GHz 5 GHz MIMO 2.4 GHz 5 GHz Throughput Speeds 2.4 GHz 5 GHz Antennas Antenna Gain 2.4 GHz 5 GHz Wi-Fi Standards Wireless Security
Mounting Operating Temperature Operating Humidity Certifications
UAPXG
228 x 228 x 50 mm (8.98 x 8.98 x 1.97")
1300 g (2.87 lb) (1) 10/100/1000 RJ45 Ethernet Port
(1) 1/10 Gbps ICM Ethernet Port Reset
PoE+ 802.3bt 31W
4457VDC
25 dBm 25 dBm
4 x 4 4 x 4
800 Mbps 1.7 Gbps Integrated Internal Antenna
6 dBi 8 dBi 802.11 a/b/g/n/ac/ac-wave2 WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) Wall/Ceiling/Junction Box (Kits Included) -10 to 60° C (14 to 140° F) 5 to 95% Noncondensing CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer.
WARNING: Do not use this product in a location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer's label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
Limited Warranty
UBIQUITI NETWORKS, Inc ("UBIQUITI NETWORKS") warrants that the product(s) furnished hereunder (the "Product(s)") shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS' sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term.
Warranty Conditions
The above warranty does not apply if the Product:
(I)
has been modified and/or altered, or an addition made thereto,
except by Ubiquiti Networks, or Ubiquiti Networks' authorized
representatives, or as approved by Ubiquiti Networks in writing;
(II) has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;
(V) has been damaged or impaired as a result of using third party firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT6A (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.
Returns
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS' facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty
Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER'S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer's selection of products (including the Products) for buyer's application and/or failure of products (including the Products) to meet government or regulatory requirements.
Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Note
Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE, RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
This radio transmitters (FCC ID: SWX-UAPXG, FCC ID: SWXM442G, FCC ID: SWX-M445GL and FCC ID: SWX-M445GH) have been approved by FCC.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This device complies with ISED Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that
may cause undesired operation of the device. The radio transmitters (IC: 6545AUAPXG, IC: 6545AM442G, IC: 6545A-M445GL and IC: 6545A-M445GH) have been approved by ISED Canada.
CAN ICES-3(A)/NMB-3(A)
Le présent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage; 2. l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement. Les présents émetteurs radio (IC : 6545AUAPXG, IC : 6545AM442G, IC : 6545A-M445GL et IC : 6545A-M445GH) ont été approuvé par ISDE Canada.
RF Exposure Warning
The antennas used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be lo cated or operating in conjunction with any other antenna or trans mitter, except as listed for this product's certification. Les antennes utilisées pour cet émetteur doit être installé pour fournir une distance de séparation d'au moins 28 cm de toutes les personnes et ne doit pas être situé ou opérant en conjonction avec une autre antenne ou un autre émetteur, sauf dans les cas énumérés à la certifi cation de ce produit.
Australia and New Zealand
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable to it.
RoHS/WEEE Compliance Statement
English
European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
Deutsch
Die Europäische Richtlinie 2012/19/EU verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.
Español
La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.
Français
La directive européenne 2012/19/UE exige que l'équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L'élimination et le recyclage en bonne et due forme ont pour but de lutter contre l'impact néfaste potentiel de ce type de produits sur l'environnement et la santé publique. Pour plus d'informations sur le mode d'élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l'endroit où vous avez acheté le produit.
Italiano
La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull'imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l'ambiente e per la salute dell'essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.
Declaration of Conformity
[Bulgarian] UBIQUITI NETWORKS , UAP-XG 2014/53/. : www.ubnt.com/compliance
Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa UAP-XG u skladu s Direktivom 2014/53/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: www.ubnt.com/compliance
Cestina [Czech] Tímto UBIQUITI NETWORKS prohlasuje, ze typ rádiového zaízení UAP-XG je v souladu se smrnicí 2014/53/EU. Úplné znní EU prohlásení o shod je k dispozici na této internetové adrese: www.ubnt.com/compliance
Dansk [Danish] Hermed erklærer UBIQUITI NETWORKS, at radioudstyrstypen UAP-XG er i overensstemmelse med direktiv 2014/53/EU. EUoverensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: www.ubnt.com/compliance
Nederlands [Dutch] Hierbij verklaar ik, UBIQUITI NETWORKS, dat het type radioapparatuur UAP-XG conform is met Richtlijn 2014/53/EU. De volledige tekst van de EU-conformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: www.ubnt.com/compliance
English Hereby, UBIQUITI NETWORKS declares that the radio equipment type UAP-XG is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/compliance
Eesti keel [Estonian] Käesolevaga deklareerib UBIQUITI NETWORKS, et käesolev raadioseadme tüüp UAP-XG vastab direktiivi 2014/53/EL nõuetele. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: www.ubnt.com/compliance
Suomi [Finnish] UBIQUITI NETWORKS vakuuttaa, että radiolaitetyyppi UAP-XG on direktiivin 2014/53/EU mukainen. EUvaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.ubnt.com/compliance
Français [French] Le soussigné, UBIQUITI NETWORKS, déclare que l'équipement radioélectrique du type UAP-XG est conforme à la directive 2014/53/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: www.ubnt.com/compliance
Deutsch [German] Hiermit erklärt UBIQUITI NETWORKS, dass der Funkanlagentyp UAP-XG der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.ubnt.com/compliance
[Greek] / UBIQUITI NETWORKS, UAP-XG 2014/53/. : www.ubnt.com/compliance
Magyar [Hungarian] UBIQUITI NETWORKS igazolja, hogy a UAP-XG típusú rádióberendezés megfelel a 2014/53/EU irányelvnek. Az EU-megfelelségi nyilatkozat teljes szövege elérhet a következ internetes címen: www.ubnt.com/compliance
Íslenska [Icelandic] Hér með lýsir UBIQUITI NETWORKS yfir því að UAP-XG er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/compliance
Italiano [Italian] Il fabbricante, UBIQUITI NETWORKS, dichiara che il tipo di apparecchiatura radio UAP-XG è conforme alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: www.ubnt.com/compliance
Latvi kalba [Latvian] Ar so UBIQUITI NETWORKS deklar, ka radioiekrta UAP-XG atbilst Direktvai 2014/53/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams sd interneta vietn: www.ubnt.com/compliance
Lietuvi kalba [Lithuanian] As, UBIQUITI NETWORKS, patvirtinu, kad radijo rengini tipas UAP-XG atitinka Direktyv 2014/53/ES. Visas ES atitikties deklaracijos tekstas prieinamas siuo interneto adresu: www.ubnt.com/compliance
Malti [Maltese] B'dan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta' tagmir tar-radju UAP-XG huwa konformi mad-Direttiva 2014/53/UE. Id-dikjarazzjoni tal-konformità tista' tii kkonsultata minn www.ubnt.com/compliance
Norsk [Norwegian] UBIQUITI NETWORKS erklærer herved at utstyret UAP-XG er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2014/53/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: www.ubnt.com/compliance
Polski [Polish] UBIQUITI NETWORKS niniejszym owiadcza, e typ urzdzenia radiowego UAP-XG jest zgodny z dyrektyw 2014/53/UE. Pelny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: www.ubnt.com/compliance
Português [Portuguese] O(a) abaixo assinado(a) UBIQUITI NETWORKS declara que o presente tipo de equipamento de rádio UAP-XG está em conformidade com a Diretiva 2014/53/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: www.ubnt.com/compliance
Român [Romanian] Prin prezenta, UBIQUITI NETWORKS declar c tipul de echipamente radio UAP-XG este în conformitate cu Directiva 2014/53/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: www.ubnt.com/compliance
Slovencina [Slovak] UBIQUITI NETWORKS týmto vyhlasuje, ze rádiové zariadenie typu UAP-XG je v súlade so smernicou 2014/53/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: www.ubnt.com/compliance
Slovenscina [Slovenian] UBIQUITI NETWORKS potrjuje, da je tip radijske opreme UAP-XG skladen z Direktivo 2014/53/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.com/compliance
Español [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioeléctrico UAP-XG es conforme con la Directiva 2014/53/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: www.ubnt.com/compliance
Svenska [Swedish] Härmed försäkrar UBIQUITI NETWORKS att denna typ av radioutrustning UAP-XG överensstämmer med direktiv 2014/53/EU. Den fullständiga texten till EU-försäkran om överensstämmelse finns på följande webbadress: www.ubnt.com/compliance
Online Resources Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com
Ubiquiti Networks, Inc. 685 Third Avenue, 27th Floor
New York, NY 10017 USA
www.ubnt.com
©2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
AI091417
Adobe PDF Library 15.0