VTech Toot-Toot Friends My Magical Unicorn

Introduction

Thank you for purchasing the VTech® Toot-Toot Friends™ My Magical Unicorn! Place Fairy Luna on the MagicPoint™ location to hear fun sounds and responses! Press Unicorn Twinkle's heart button to see her walk, move her head, flap her wings, watch her horn light up in different colours and more! Interact with Twinkle using the Magic Wand and see her come to life with motion, lights and even more fun responses!

The toy includes the following components:

• Light Up Horn
• Moving Head
• Sound Sensor
• Heart Button
• Magic Wand
• Walking Legs
• Off / Low / High Volume Switch
• Flapping Wings
• Fairy Luna [character figure]
• MagicPoint™ Location [interactive point on toy]
• Mini Unicorn [small figure]

A textual description of the main toy: A grey and white unicorn with a saddle, a small fairy figure (Fairy Luna) sitting on the saddle, and a small unicorn figure (Mini Unicorn) standing beside it. Various interactive points and buttons are visible.

Included in this Package

NOTE: This toy is not intended for teething.

• One Magical Unicorn - Twinkle
• One MagicPoint™ Character - Fairy Luna
• One Mini Unicorn
• One Magic Wand
• One Parent's Guide

WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy and should be discarded for your child's safety.

NOTE: Please keep this Parent's Guide as it contains important information.

Removing the Packaging Locks

To remove packaging locks:

1. Rotate the packaging lock anticlockwise for 90 degrees. [icon of lock being rotated]
2. Pull out the packaging lock. [icon of lock being pulled out]

Getting Started

Battery Removal and Installation

Follow these steps to install batteries:

1. Make sure that the unicorn is turned Off.
2. Locate the battery cover on the bottom of the unicorn. Use a screwdriver to loosen the screw and remove the cover.
3. If used batteries are present, remove these batteries from the unit by pulling up on one end of each battery.
4. Install 4 new AA (LR6/AM-3) batteries following the diagram inside the battery box. For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.
5. Replace the battery cover and tighten the screw to secure.

A textual description of the battery compartment diagram: Shows the inside of the battery compartment with four AA battery slots, marked with positive (+) and negative (-) terminals.

WARNING: Adult assembly required for battery installation. Keep batteries out of reach of children.

Important Battery Information

• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.

Rechargeable Batteries

• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.

Disposal of Batteries and Product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicate they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.

The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation.

The solid bar indicates that the product was placed on the market after 13th August, 2005.

Help protect the environment by disposing of your product or batteries responsibly. VTech® cares for the planet. Care for the environment and give your toy a second life by disposing of it at a small electricals collection point so all its materials can be recycled.

In the UK: Visit www.recyclenow.com to see a list of collection points near you.

In Australia & New Zealand: Check with your local council for kerbside collections.

Note: Try-Me Mode Activation

This product is in Try-Me mode in the packaging. To activate Normal Play mode, please follow these steps:

1. Turn the unit On.
2. Place Fairy Luna on the MagicPoint™ location.
3. When you hear two short sounds, normal game play has been activated.

Product Features

1. Off/Low/High Volume Switch

   To turn the unit On, slide the switch to either the Low Volume [low volume icon] or High Volume [high volume icon] position. To turn the unit Off, slide the switch to the Off [off icon] position.

2. Heart Button

   Press the Heart Button [heart button] to hear Twinkle sing, talk, move her head, walk and flap her wings. Listen and interact with Twinkle to enjoy fun and imaginative role-play situations with motion, lights and more!

3. MagicPoint™ Location

   There is one MagicPoint™ located on the unit. Place the MagicPoint™ character onto the MagicPoint™ location to hear fun responses. The MagicPoint™ location can also interact with other VTech® Toot-Toot Friends™ characters (each sold separately).

4. Sound Sensor

   There is one Sound Sensor installed in the unit. The Sound Sensor can receive sounds. Follow Twinkle's instructions by casting magic spells, clapping your hands, and waving the magic wand to enjoy fun situations.

5. Magic Wand

   Listen to Twinkle and wave the Magic Wand when she says to trigger fun sounds with motion, music and lights.

6. Automatic Shut Off

   To preserve battery life, the VTech® Toot-Toot Friends™ My Magical Unicorn will automatically power down after several minutes of no input. The unit can be turned on again by sliding the Off/Low/High Volume Switch to the Low Volume or High Volume position, or by pressing the Heart Button.

   NOTE: If the unit powers down while playing, we suggest installing a brand new set of batteries.

Activities

Slide the Off/Low/High Volume Switch to either the Low Volume or High Volume position to turn the unit on.

1. Heart Button Activity

   Press the Heart Button to hear Twinkle sing, talk, shake her head, walk and flap her wings. Her horn will also light up in multiple colours.

   A textual description of the diagram: Shows the unicorn toy with a sound wave icon indicating sound output.

2. Fairy Luna Activity

   Place Fairy Luna onto the MagicPoint™ location to hear her sing and talk.

   A textual description of the diagram: Shows Fairy Luna placed on the MagicPoint™ location on the unicorn's saddle.

3. Interactive Play

   Sometimes, Twinkle will ask for your help. You can interact by pressing the Heart Button, placing Fairy Luna onto the Magic Point™ location, clapping your hands, casting a magic spell or waving the Magic Wand.

   A textual description of the diagram: Shows the unicorn, Fairy Luna on the MagicPoint™ location, and the Magic Wand.

Song Lyrics

Song 1. Fairy Luna & Unicorn Twinkle

Magic, Adventure, Exploring, Together!
We can have so much fun, when we use our imagination!

Song 2. Fairy Luna

I'm Luna the little Fairy,
I love to ride with Twinkle.
Would you like to play with us, and explore our magical world?!

Song 3. Fairy Luna & Unicorn Twinkle

You're the best friend that I've ever had. (Unicorn)
We'll be best friends forever and ever. (Fairy)
Life's better, when we adventure together! (Unicorn & Fairy)

Song 4. Fairy Luna & Unicorn Twinkle

Riding in the breeze, flying through the sky,
Exploring the forest, just you and I,
Having a magical day, singing hip hip hooray!

Song 5. Unicorn Twinkle

If you're magic and you feel it, wave your wand!
If you're magic and you feel it, wave your wand!
If you're magic and you feel it, and you really do believe it!
If you're magic and you feel it, wave your wand!

Care & Maintenance

1. Keep the product and its metal parts clean by wiping them with a slightly damp cloth.
2. Keep the product out of direct sunlight and away from any direct heat sources.
3. Remove the batteries when the product is not in use for an extended period of time.
4. Do not drop the product on a hard surface and do not expose the product to excess moisture or water.

Troubleshooting

If for some reason the toy stops working or malfunctions, please follow these steps:

1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.

If the problem persists, please contact VTech Consumer Services Department and a service representative will be happy to help you.

Consumer Services

Creating and developing VTech® products is accompanied by a responsibility that VTech® takes very seriously. Efforts are made to ensure the accuracy of the information provided. However, errors can occur. VTech stands behind its products and encourages customers to contact the Consumer Services Department with any problems and/or suggestions.

UK Customers:

Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK)
Website: www.vtech.co.uk/support

Australian Customers:

Phone: 1800 862 155
Website: support.vtech.com.au

NZ Customers:

Phone: 0800 400 785
Website: support.vtech.com.au

Product Warranty/Consumer Guarantees

UK Customers: Read the complete warranty policy online at vtech.co.uk/warranty.

Australian Customers: VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED – CONSUMER GUARANTEES. Under the Australian Consumer Law, consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.