JL Audio CF-350mt Custom Fit 3.50 in / 90 mm Mid-Tweeters
Owner's Manual
Model: CF-350mt-10162023
JL Audio Logo
Product Description
Two 90 mm mid- and high-frequency drivers.
Also described as:
- Deux haut-parleurs de 90 mm pour moyennes et hautes fréquences
- Dos altavoces de 90 mm de gama media y alta
- Zwei 90 mm mitten und hochtonlautsprecher
- Due altoparlanti da 90 mm per medie e alte frequenze
Important Installation Information
- Installation requires appropriate tools and safety equipment. Professional installation is recommended.
- Before installation, turn off the audio system and disconnect the battery system from the audio system.
- Before cutting or drilling, check for potential obstacles behind mounting surfaces.
- Do not mount this product in an engine compartment or other area of extreme heat.
- Mount this product securely to prevent damage or injury in severe conditions.
Safety Warning
Listen to your audio system at levels appropriate for operating conditions and hearing safety.
Technical Specifications
| Specification | Value |
|---|---|
| Model | CF-350mt |
| RMS Power | 35 W |
| Recommended Power | 10-50 W |
| Sensitivity | 86.0 dB @ 1W/1m |
| Frequency Response | 450 Hz - 20 KHz ± 3 dB |
| High-Pass Filter (HPF) | 450 Hz |
| Nominal Impedance (ZNOM) | 4Ω |
Dimensions
- Overall Diameter: 3.12 in (80 mm)
- Mounting Diameter (Cutout): 2.76 in (70 mm)
- Mounting Depth: 1.29 in (33 mm)
- Overall Depth (front to back): 1.59 in (40 mm)
- Magnet Diameter: 3.46 in (88 mm)
- Magnet Height: 0.26 in (7 mm)
Included Components
- 2 x CF-350mt Speakers
- 2 x Crossover Filters
- 4 x #8 x 1 in (25 mm) Mounting Screws
Critical Installation Warning
WARNING: These speakers must be used with an appropriate high-pass crossover filter, like those supplied in this kit, or actively filtered: 12 dB/octave at 450 Hz. Failure to use an appropriate filter will result in damage or failure of the product and will NOT be covered under warranty.
