Philips GC8900 Series Steam Generator Iron User Manual

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Read this user manual, the important information leaflet, and the quick start guide carefully before you use the appliance. Save them for future reference.

Product Overview (Fig. 1)

The steam generator iron consists of the following parts:

• 1. Steam supply hose
• 2. Steam trigger/Steam boost
• 3. 'Iron ready' light (indicator)
• 4. Soleplate
• 5. Iron platform
• 6. Carry lock release button
• 7. Detachable water tank
• 8. Filling hole
• 9. Supply hose storage compartment
• 10. EASY DECALC knob
• 11. Mains cord with plug
• 12. EASY DECALC light (indicator)
• 13. ECO button with light (indicator)
• 14. 'Water tank empty' light (indicator)
• 15. On/off button with power-on light and auto-off light (indicator)

Preparing for Use

Type of Water to Use

This appliance is designed for tap water. For areas with hard water, distilled or demineralized water (or a 50% mix) is recommended to prolong the appliance's lifetime. Warning: Do not use perfumed water, water from tumble dryers, vinegar, starch, descaling agents, ironing aids, or other chemicals, as they can cause spitting, staining, or damage.

Filling the Water Tank

Fill the water tank before each use or when the 'water tank empty' light flashes. You can refill it anytime during use.

1. Remove the water tank (Fig. 2) and fill it with water up to the MAX indication (Fig. 3).
2. Reinsert the water tank, fitting the bottom part first.
3. Push the top part until it locks into place with a 'click' (Fig. 4).

Water Tank Empty Light

When the water tank is nearly empty, the 'water tank empty' light flashes (Fig. 5). Fill the tank and press the steam trigger to reheat. Continue steaming when the 'iron ready' light is continuously lit.

Using the Appliance

OptimalTEMP Technology

Warning: Do not iron non-ironable fabrics.

OptimalTEMP technology allows ironing all ironable fabrics in any order without adjusting temperature or sorting garments. The hot soleplate can be safely rested directly on the ironing board (Fig. 6). Fabrics with symbols like those in Fig. 7 are ironable (e.g., linen, cotton, polyester, silk, wool, viscose, rayon). Fabrics with symbols like those in Fig. 8 are not ironable (e.g., synthetics like Spandex, elastane, polyolefins; prints on garments are also not ironable).

Ironing

1. Place the steam generator on a stable, even surface. (Note: Use a stable ironing board for safety.)
2. Ensure the water tank is filled (see 'Filling the Water Tank').
3. Plug the mains cord into an earthed socket and press the on/off button. Wait for the 'iron ready' light to be continuously lit (Fig. 9), approximately 2 minutes.
4. Remove the steam supply hose from its compartment.
5. Press the carry lock release button to unlock the iron from the iron platform (Fig. 10).
6. Press and hold the steam trigger to start ironing (Fig. 11). (Note: For first use, hold for up to 30 seconds. Longer if stored.)
7. For best results, perform final strokes without steam.

MAX Setting

For faster ironing and more steam:

1. Press and hold the on/off button for 5 seconds until the light turns white.
2. The appliance returns to normal steam mode automatically after 15 minutes for energy saving.
3. To switch back to normal steam mode, press and hold the on/off button for 2 seconds until the light turns blue again.

Steam Boost Function

For difficult creases:

• Press the steam trigger twice quickly for 3 powerful shots of steam.
• Press the steam trigger once to stop the function.

Vertical Ironing

Warning: Hot steam is emitted. Never iron clothes on a person (Fig. 12). Do not direct steam at yourself or others.

Use the steam iron vertically to remove wrinkles from hanging fabrics. Hold the iron vertically, press the steam trigger, lightly touch the garment with the soleplate, and move the iron up and down (Fig. 13).

Safe Rest

While rearranging your garment, you can rest the iron on the iron platform or horizontally on the ironing board (Fig. 6). The OptimalTEMP technology ensures the soleplate will not damage the ironing board cover.

Energy Saving

ECO Mode

Use ECO mode (reduced steam) to save energy without compromising ironing results.

• To activate ECO mode, press the ECO button (Fig. 14). The green ECO light turns on.
• To deactivate, press the ECO button again. The green ECO light turns off.

Auto-Shut Off

The appliance switches off automatically after 10 minutes of inactivity to save energy. The auto-off light on the on/off button flashes. Press the on/off button to reactivate. Warning: Never leave the appliance unattended when connected to the mains. Always unplug after use.

Cleaning and Maintenance

Descaling the Appliance

It is important to use the EASY DECALC function as soon as the 'EASY DECALC' light flashes (Fig. 15). The light indicates the appliance needs descaling (approx. 1 month or 10 ironing sessions). Perform the EASY DECALC procedure before continuing to iron. Note: Increase frequency if you have hard water.

Warning: To avoid burns, unplug and let the appliance cool for at least two hours before descaling (Fig. 16).

1. Remove the plug from the wall socket.
2. Remove the detachable water tank (Fig. 2).
3. Remove the iron from the iron platform.
4. Hold and shake the steam generator base (Fig. 17).
5. Remove the EASY DECALC knob (Fig. 18).
6. Hold the base over a sink and empty it through the EASY DECALC opening (Fig. 19). (Note: Be mindful of the appliance's weight.)
7. Reinsert the EASY DECALC knob and turn clockwise to fasten (Fig. 20).
8. You can use the iron immediately after completing the procedure.

Descaling the Soleplate

If not descaled regularly, scale particles can cause brown stains. Perform this procedure twice for best results.

1. Ensure the appliance is cool and clean the soleplate with a damp cloth.
2. Remove the water tank and iron from the iron platform.
3. Remove the EASY DECALC knob and empty water through the EASY DECALC opening.
4. Hold the appliance with the EASY DECALC opening facing up and pour 500ml water into it (Fig. 21). (Note: Be mindful of the appliance's weight.)
5. Keep the opening facing up, reinsert the EASY DECALC knob, and turn clockwise to fasten (Fig. 22).
6. Place the appliance on a stable surface. Fill the water tank halfway. Switch on the appliance and wait 5 minutes.
7. Keep the steam trigger pressed while ironing thick cloth back and forth for 3 minutes (Fig. 23). Warning: Hot, dirty water (approx. 100-150 ml) will come out of the soleplate.
8. Stop cleaning when no more water or only steam comes out of the soleplate.
9. You can use the appliance immediately, or unplug it after descaling is complete.

Storage

1. Switch off and unplug the appliance. (Note: Empty the water tank after each use.)
2. Place the iron on the iron platform and lock it using the carry lock release button (Fig. 24).
3. Let the appliance cool down completely.
4. Fold and store the supply hose in the storage compartment (Fig. 25).
5. Fold and secure the mains cord with the Velcro strip.
6. The appliance can be carried with one hand by the iron's handle when locked.

Troubleshooting

This section summarizes common problems. For further assistance, visit www.philips.com/support or contact the Consumer Care Center.

Warranty and Support

For information or support, visit www.philips.com/support or read the international warranty leaflet.

Manufacturer: D.A.P. B.V., Tussendiepen 4 a, 9206 AD, Drachten, The Netherlands

Importer (Russia/Customs Union): OOO "Tekhnika dlya doma Philips", Russian Federation, 123022, Moscow, ul. Sergey Makeev, d. 13, 5th floor, premises XVII, room 31, phone +7 495 961-1111

Model Numbers: GC8930, GC8940, GC8942, GC8950, GC8952, GC8960, GC8962

Power: 1720-2100W, 220-240V, 50-60Hz

Appliance Class: Class I (for domestic use)

Made in: Indonesia

Storage/Operating Conditions:

• Temperature: +0°C to +35°C
• Relative Humidity: 20% - 95%
• Atmospheric Pressure: 85 - 109 kPa