Shop for Security Cameras & Surveillance System - Zosi
User Guide for ZOSI models including: C1 Pro Smart Wi-Fi Battery Security Camera, C1 Pro, Smart Wi-Fi Battery Security Camera, Battery Security Camera, Security Camera, Camera
ZOSI 2K 3MP Security Camera Outdoor Wireless with Solar Panel, Battery Operated WiFi CCTV Camera, Color Night Vision, Human Detection, 2-Way Audio, Spotlight Alarm, Remote Access，C1 Pro : Electronics & Photo
File Info : application/pdf, 12 Pages, 847.76KB
DocumentDocumentQuick Start Guide ^t&^ This guide will get you going with your camera. For more details and information of the camera, please visit our official website www.zositech.com V2.W.02.Z 01 What's in the box Battery Camera USB Cable Mounting Screws Adhesive Pad Magnetic Base Mounting Bracket Quick Start Guide Reset Needle Warning Sticker NOTE: Accessories are subject to the model you purchased. 1 English 02 Gallery & Specs IR LEDs HD Lens Status Indicator Microphone Spotlights PIR Sensor Speaker Wall Mount Magnetic Mount Power Switch DC 5V Power Port Charge Indicator Micro SD Card Slot Reset Hole NOTE: The actual appearance varies by different models. Power Switch Reset Button Status Indicator Slow Flashing Red Light Fast Flashing Red Light Solid Blue Light Charge Indicator Solid Red Light Solid Blue Light Hold 3-5 seconds Turn ON/OFF Hold 3-5 seconds Device Reset Waiting for connection Device connecting Connection succeeded Camera's charging Camera's fully charged English 2 03 Power-ON Press and hold the power switch on the back of the camera for 3 seconds, the network indicator lights blink red. Power on the NVR, the camera network indicator's blinking red lights will turn into solid blue lights, and the NVR will automatically connect and display video. NOTE: It is recommended to test that each camera can work normally before installation, if not, please contact us. Press and hold Power Switch Charge Indicator Power-ON Battery Charging Solid Red LightCamera's charging Solid Blue LightCamera's fully Charged 04 Battery Charging Cameras come with batteries with partial charge when it leaves the factory. Before using it for the first time, please fully charge the camera with USB cable and charger before first use. Built-in battery, non-removable. Precautions (1) Do not charge the camera when the temperature is higher than 45¥ or lower than 0¥. (2) Please do not charge with an adapter in a humid environment. (3) If using a power adapter to charge, please use a certified power adapter. (4) After fully charged, please plug the power port with the rubber plug to prevent moisture or water. 3 English 05 Add Extra Devices NOTE: The camera system has been matched before shipment. After the camera is powered on, the system will automatically connect and display video. If you want to add or reset a camera, follow the steps below. · Press and hold the power switch on the back of the camera for 3 seconds, and you will hear "Device is waiting to connect", and the network indicator light will flash red slowly. · Right-click the mouse, click the Menu - Main Menu - Information System, aim the camera at the QR code on the bottom right at a distance of 30-100cm, and scan the QR code to start pairing. English 4 · When you hear "wireless configuration succeed" from the camera, the network indicator light comes solid red for about 20 seconds, the camera will be automatically added to the system and display video. The operation video is as follows: Tutorial Video 06 Mount the Camera 1Place it on any flat surface: table, chair, TV cabinet, etc 2. Install with Mounting Bracket (1) Unscrew the mount base, drill holes in accordance with the holes on the base, and tap the drywall anchors into the wall and screw the mount base. (2) Attach the bracket to the base. (3) Screw the camera to the bracket and adjust the camera angle. 5 English Unscrew the Mount Base Screw the Mount Base on the Wall Attach the Bracket to the Base Adjust the Camera Angle 3. Install with Magnetic Bracket · Please wipe the wall surface and the bottom of the magnetic bracket before installation. English 6 a: Tear the protective film on one side of the double-sided tape and paste it in the position where you want to install. please noted that you have to press the double-sided tape for more than 3 minutes to squeeze the air between the double-sided tape and the wall. b: Please Tear the protective film on the other side, and fix the bracket on the surface of the double-sided tape, press the bracket and keep it for more than 3 minutes as well. For best results, you can place camera on the bracket after waitting for 10 minutes . c: Attach the camera to the magnetic bracket and adjust the camera angle. NOTE: Please keep the surface clean, smooth and dry. It is unsuitable for uneven wood and plaster walls. Tear off the protective film on one side of the double-sided adhesive pad, stick it on the location. Remove the protective film on the other side, and stick the bracket on the adhesive pad. 7 English Adjust the camera angle Distancia: 5-50 pies (1,5-15 m) Altura: 6-9 pies (2-3m) 07 Installation Environment Height: Install the camera 6-9 ft (2-3m) above the ground. Distance: Best accuracy for objects within 5-50 ft (1.5-15 m). Angle: Tilt the camera down about 30°-60°from the horizontal position. It is suggested to adjust the angle between camera and detected object larger than 10°. NOTE: Wake-up of the camera will be affected by various factors, such as the distance between the person and the camera, the height of the person, the height and angle of the camera, etc. English 8 08 Installation Precautions · Do not face the camera to any light source. · Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image performance due to reflections from infrared LEDs, ambient lights or status lights. · Do not mount the camera in shaded area, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject are at the same lighting conditions. · For optimum performance, it is recommended that the camera be installed as far away as possible from electronic devices such as microwaves, televisions, radio phones and baby monitors to prevent signal interference. · It is recommended to clean the lens with a soft cloth from time to time. · Do not expose the power port to water or moisture, or blocked by dirt or other things. · Do not install the camera where rain and snow may hit the lens directly. · Camera may work in extremely cold conditions as low as -10°C as it will produce heat when powered on. You may power the camera indoors for a few minutes before installing it outdoors. (Only for outdoor cameras) 9 English 09 Notification of Compliance 1. FCC Compliance Statement This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) This device may not cause harmful interference, (2) This device must accept any interference received, including interference that may cause undesired operation. 2. CE Simplified EU Declaration of Conformity ZOSI declares that product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. 3. Correct Dispose of this product This marking indicates that this product should not be disposed with other household waste throughout the EU. To prevent harm to the environment or human health from uncontrolled waste disposal and promote the sustainable reuse of material resources, please recycle it responsibly. To return your used device, please use the return and collection system or contact the retailer from whom the product was purchased. They can take this product for environmentally safe recycling. English 10 www.zositech.com Support Email: service@zositech.com Facebook: https://www.facebook.com/ZosiTechnology/ Whatsapp: +1-866-841-6932 UK Whatsapp: +86 18675610962 Copyright © 2023 ZOSI Technology Co., Ltd. No part of this publication may be reproduced in any way without the written permission of ZOSI. The information in this publication is believed to be accurate in all respects. ZOSI assumes no responsibility for any consequences resulting from their use. As our products require continuous improvement, ZOSI reserves the right to modify product designs, specifications and prices without notice and without any obligation. All rights reserved,and ZOSI reserves the final interpretation right of this manual. F920000Z3006940