ROLLING COUNTER DOOR EXAM ROOM COUNTER DOOR
CLOPAY COMMERCIAL – MODEL CESC15
A visual representation shows a modern exam room featuring the Clopay rolling counter door. The door is closed, with a clean, flat surface. The room includes medical equipment like a hospital bed and a counter with sinks and cabinets.
Safely Treat Behavioral Health Patients in Standard Rooms
Flexible Functionality
This counter door enables hospitals, long-term care facilities, urgent care centers, and other institutions to utilize the same exam room for both medical and behavioral health patients consecutively. This multi-purpose approach saves healthcare providers money and resources while ensuring patient security.
Utilizing an Anti-Ligature Door
The fascia-side motor is positioned above the ceiling, with the coil located above the medical cabinet. This design creates a completely flat surface facing the patient's room, concealing sinks, cabinets, oxygen tanks, and other potentially hazardous equipment. All fasteners are hidden, and the bottom bar is flat.
Durable
The exam room shutter comes standard with a steel curtain for optimal strength. It features impact-resistant guides and end locks, ensuring the curtain remains within the guides even after an impact.
Meeting the Standard
The Exam Room Counter Door complies with ASHRAE/Facility Guidelines Institute (FGI) recommendations for exam room finishes, ensuring it is impact, tamper, and ligature resistant.
Standard Component Materials and Finishes
Component Breakdown
- 1. Counter-Balance Shaft: Made of steel and hidden above the ceiling. It supports the curtain and includes torsion springs for assisted operation.
- 2. Brackets: Steel with powder coating matching the curtain. Bolted to the guides to support the counter-balance shaft and curtain.
- 3. Tubes and Guides: Two-piece steel guides attached to tubes recessed into drywall.
- 4. Curtain: Interlocking, roll-formed, flat-faced slats made of galvanized steel with a GalvaNex™ polyester enamel finish available in Gray, Tan, White, or Black.
- 5. Specialized End Locks: Riveted to the end of each slat, designed to keep the curtain within the guides during impacts.
- 6. Bottom Bar: A single-angle, flat bottom bar made of steel with powder coating to match the curtain, ensuring a smooth transition.
Optional Materials and Finishes
- 16-gauge extruded aluminum in clear, color anodized, and powder coat finishes.
- Stainless steel 300 series in #4 finish.
- SpectraShield® powder coating in over 180 colors.
- For enhanced durability, consider upgrading to Galvanex™ Ultra™ or SpectraShield® Ultra™ powder coat finishes. These are polyester-based, textured, wear-resistant clear coats that improve resistance to corrosion and abrasion from cycling.
Operation and Structural Requirements
- Motor operation is required.
- The product is mounted to tubes recessed into the drywall along with the coil, eliminating ligature points.
- Motor is mounted above the ceiling.
- Use of a ligature-resistant access panel is recommended but not supplied.
Custom-Designed Solutions
Contact Clopay's experienced Architectural Design Support Team for assistance in customizing products for specific applications. Visit www.architectdoorhelp.com.
