Seenda MOU-301 Wireless Trackball Mouse User Manual

Product Features

The Seenda MOU-301 is an ergonomic trackball mouse designed for versatile connectivity and comfortable use.

What's in the Package

• 1 x Wireless Mouse
• 1 x USB Receiver
• 1 x Type C Charging Cable
• 1 x User Manual

Connectivity Options

2.4G USB Connection

To connect via 2.4G USB:

1. Turn on the power switch.
2. Take out the USB receiver.
3. Press the mode switch button until the white light is on and enters 2.4G mode.
4. Insert the USB receiver into your computer's USB port.

Bluetooth Connection

To connect via Bluetooth:

1. Turn on the power switch.
2. Press the mode switch button and switch to BT1 or BT2 mode; the white light flashes slowly.
3. Press and hold the mode switch button for 3-5 seconds until the white light flashes quickly, then the mouse enters Bluetooth pairing mode.

Device Pairing Instructions

Windows 10 System

1. Click "Bluetooth" in "System Preferences".
2. Click "Add or remove a Bluetooth device".
3. Your PC is searching for and can be discovered by Bluetooth devices.
4. Click "Bluetooth device".
5. Your computer will automatically search for "BT+2.4G MS" and then click "Pair".
6. "BT+2.4G MS" is connected and can be used normally.

Mac OS System

1. Click "System Preferences" on Mac.
2. Click "Bluetooth".
3. Your computer will automatically find "BT+2.4G MS", then click "Pair", complete pairing.
4. "BT+2.4G MS" is connected and can be used normally.

Android System

1. Click Settings on the device, then turn on Bluetooth.
2. Your computer will automatically find "BT+2.4G MS", then click "Pair", complete pairing.
3. "BT+2.4G MS" is connected and can be used normally.

iOS System (iOS 13 and above)

1. Turn on Assistive Touch.
2. Click Settings on the device, then turn on Bluetooth.
3. Your computer will automatically find "BT+2.4G MS", then click "Pair", complete pairing.
4. "BT+2.4G MS" is connected and can be used normally.

Charging Function Guide

When the power is insufficient, the charging indicator and the corresponding channel indicator flash until it is turned off. Please connect the power supply for charging in time, and use the USB cable to connect the TYPE-C charging Port. Connect the charging cable to the USB port of the computer; the charging indicator is always on during charging. The charging time is about 1-3.5 hours, and the indicator light turns off when charging is complete.

How to Switch Connection Mode

After BT1, BT2, and 2.4G USB modes are connected, press the mode switch button on the bottom of the mouse to switch between multiple devices.

Data Parameters

Basic Parameters

• Movement Detection Technology: Optical
• Lithium Battery Capacity: 300mA
• DPI: 200-400-800-1200-1600
• Click Life: 3 million+
• Dimension: 134.4x98.2x47.2mm
• Weight: 136g

Bluetooth Transmission Parameters

• Transmission distance: 10m
• Working Voltage: 3.7V
• Working current: 8mA
• Reaction rate: 125Hz

2.4G Transmission Parameters

• Transmission distance: 20m
• Working Voltage: 3.7V
• Working current: 10mA
• Reaction rate: 250Hz

System Requirements

Bluetooth

• Bluetooth-enabled device
• Windows 8, Windows 10 or higher version
• Mac OS X 10.4 or higher version
• Android 4.3 or higher version

2.4G USB

• An available USB port
• Windows XP, Windows 7, Windows 8, Windows 10 or higher version
• Mac OS X 10.4 or higher version

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.