Canoe 11.0 Drivers › Url: https://cdn.vector.com/cms/content/events/2019/VA/TechDay/CANoe CANalyzer news version 12.0
Vector.com View services support › Url: https://assets.vector.com/cms/content/events/2019/VA/TechDay/CANoe CANalyzer news version 12.0
CANoe/CANalyzer New Features
Version 12.0
V1.0 | 2019-04-24
Agenda
u Release Information General Automotive Options Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
2
Skip topic
Release Information
Overview
u Release date 12.0 u May 2019
u Supported network technologies u CAN & CAN FD, LIN, FlexRay, MOST, J1708, Ethernet, WLAN
u Options u Smart Charging - CANoe u AMD/XCP CANoe u Car2x u Scope for CAN & CAN FD, LIN, FlexRay u J1939, CANopen, J1587 u ISO11783 CANoe u Aerospace options: AFDX®, A429, CANaero (now part of standard option .CAN) u Sensor (PSI5, SENT, SPI) - CANoe
3
Agenda
Release Information u General
Automotive Options Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
4
Skip topic
General
Main Benefits
u New Communication Concept:
u New graphical configuration u Switching of endpoints (simulated, remote, measured)
u Ethernet
u TC8 Support u TLS Support u New hardware
u Testing
u CANoe comes with viewer version of vTESTstudio u Export test reports to PDF u VT System: New Switch Matrix Module
u New Option .Smart Charging Standards:
u GB/T 27930 (China) u DIN 70121/ISO 15118 (Europe, USA)
u Option .Sensor: SENT Piggy for VN1640A/VN1530
u No VT necessary for smaller projects
u Option .CANopen: New and completely reworked configuration u Option .Car2x: New map window
5
General
Communication Concept (CANoe)
u New graphical Communication Setup window as central place to configure the Communication Model
6
General
Communication Setup Window Data Model
u Import of ARXML and vCDL (Vector Communication Description Language) files into the Data Model u Edit the Data Model and create elements from scratch
7
General
Communication Setup Window Communication Model
u Select elements from the Data Model that can be used in CANoe > Communication Model u The Communication Model is represented by the blocks in the middle u Application Models are represented as well and can be grouped with other elements
Navigation and Overview
Grouping of elements possible
8
General
Communication Setup Window Switching of States and Measurement
u State of Participants and Endpoints can be switched between Off, Simulation, Remote, and Measured u Measurement Points allow measuring of point-to-point connections
9
General
vCDL Support of SOME/IP Binding Configuration
[version=1.0, serviceId=11]
service Calculator
{
void Add(int32 operand1, int32 operand2, out float result)
[methodId=31];
void Substract(int32 operand1, int32 operand2, out float result) [methodId=32];
void Multiply(int32 operand1, int32 operand2, out float result) [methodId=33];
void Divide(int32 operand1, int32 operand2, out float result) [methodId=34];
[udpEndpoint="192.168.1.10:40000", sdMulticastEndpoint="239.0.0.1:30490"] consumer Terminal;
[simulated = false, instanceId = 1]; provider VC121; }
Binding configuration can also be separated from interface definition
(e.g. multiple files)
10
General
Distributed Mode
u Unified configuration for all VTP devices u All VTP devices can now be configured independently of the connection type (USB or Ethernet) u The connection in distributed mode must now be explicitly defined u There is a new button in CANoe Ribbon for this purpose
u Channel Mapping u For all VTP devices the channel mapping can now be done via the Platform Manager u This works via USB (as before) as well as via Ethernet connection
11
General
Distributed Mode Affected RT setups
VN89xx: Network interface and simulation platform
USB or Ethernet
VT60xx: VT board as simulation platform
Ethernet
CANoe RT Rack: IPC as simulation platform
Ethernet
12
VN89xx VT System CANoe RT Rack
VTP dialog also replaces the standalone manager
VN8900 standalone
VT System standalone
VT System
Agenda
Release Information General u Automotive Options Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
13
Skip topic
Automotive Options
AUTOSAR PDU IG for CAN, Ethernet & FlexRay
u New IG for AUTOSAR PDUs u Interactive, intuitive stimulation tool for AUTOSAR PDU based networks u Available in CANoe and CANalyzer u Manipulates PDU timings, triggers PDUs, changes PDU payload u Full support of security & safety PDU features in CANoe (Secured PDUs, SQC, Update Bit) u Familiar workflow for CAN IG users
14
Automotive Options
Diagnostics: Features and Improvements
u DoIP: u Transmit "Vehicle Identification Request" as IPv6 multicast and as unicast to a dedicated address u Choose whether the optional "VIN/GID sync status" should be sent by a simulation node u "Legacy DoIP access" can be deactivated (deactivated by default in new configurations to avoid confusion when using VN56xx HW interfaces)
u Improved data interpretation for OBD-II u Support service 0x38 "Request File Transfer" in the standard diagnostic description (GenericUDS.cdd)
15
Automotive Options
LIN: Improvements
u The Interactive Scheduler now allows you to configure and send individual frames: u Raw frames u Frames from the LDF description
u The checksum model of the LIN-Reserved-Frames (ID 0x3e/f) can now be configured: u Use function linSetChecksumModel
16
Agenda
Release Information General Automotive Options u Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
17
Skip topic
Testing (CANoe)
Features and Improvements (1)
u CAPL now supports parallel execution of multiple threads within one test case or parallel execution of multiple test cases within one test sequence
API to start parallel execution in/of test cases
API to wait for one, multiple or all threads to return
Visualization of parallel threads in the Test Trace Window
18
Visualization of parallel threads in the Timeline of the Test Report Viewer
Testing (CANoe)
Features and Improvements (2)
u A viewer version of vTESTstudio is now part of the CANoe installation and available as free download as well; thus, no vTESTstudio license is needed anymore to open and view vTESTstudio test designs
u When using numeric system variable as field codes for the test report name the precision of the value can be specified now; the precision specifies the number of string characters or the number of decimal places
u A command line interface for the Connection Utilities allows continuous integration with Jenkins; a Connection Utility is available for free for IBM DOORS NG/RQM, Siemens Polarion ALM and PTC Integrity
19
Testing (CANoe)
Features and Improvements (Report Viewer)
u Run & analyze test in parallel u Reports in the Report Viewer format can now be opened, viewed and analyzed even during test run u Update of current report is done by dedicated user action
Perform update
See status
u Export to PDF u Create navigable and searchable PDF file
(since 11.0 SP3)
u Structural elements can be navigated u Many referenced elements can be used for
navigation as well
20
Agenda
Release Information General Automotive Options Testing (CANoe) u VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
21
Skip topic
VT System (CANoe)
VT2832 - Switch Matrix Module
Use Cases u Current switching & measurement u PWM switching / bouncing
contact simulation u Endurance Tests Configuration u Each switched path is given a
unique colour u Connected paths are given the
same color u Each column can be switched
independently with PWM or bitstream u PWM and bitstream configuration is identical to other VT System modules
22
VT System (CANoe)
Inter Board Communication (IBC) between User FPGA Modules
Use Cases
u Highly synchronized output of analog and/or digital signals
u Fast data exchange between User FPGA modules
Realization
u Ring architecture between User FPGA processor boards
Multi Module Project Setup Enabler Check Box Receiver Matrix
u Simultaneous flashing of multiple VT System User FPGA module is now possible in VT System FPGA Manager
23
Sender Dropdown
VT System (CANoe)
Improved VT System Configuration Dialog
u All regular and application specific VT System modules are now grouped in a clear way in the VT System Configuration dialog
u Support for new 60V variants already included u VT1104 Load and Measurement Module (60V) u VT7101 Power Module (60V)
24
Agenda
Release Information General Automotive Options Testing (CANoe) VT System (CANoe) u Additional Options Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
25
Skip topic
Additional Options
AMD/XCP: Feature Improvements
u New columns for parameter type, min, max and unit (CANoe 11.0 SP3)
u The XCP Master Port can now be configured for XCP on Ethernet connections
26
Additional Options
Scope: New Features
u With CANoe/CANalyzer 12.0 it is possible to switch between u Several scope hardware configurations - means users can predefine several hardware settings which can be activated for each measurement
u Hardware configuration capabilities are available in GUI and CAPL
27
Additional Options
Sensor: SENT Piggyback
u New SENT Piggyback u Supported Network Interfaces:
u VN1640A and VN1530 (PCIe Interface) u Drivers already released
28
Additional Options
CANopen: Configuration Window
New CANopen Configuration window replaces ProCANopen and allows analysis, configuration and simulation of CANopen networks u Scanning of CANopen networks u Access of the entire object
dictionary of real and simulated (CANoe) nodes u Setup of PDO and SRDO communication u Configuration of Heartbeat monitoring u Read and write the entire network configuration u Generation of CAN database u Creation of simulation nodes for a network simulation (CANoe)
29
Agenda
Release Information General Automotive Options Testing (CANoe) VT System (CANoe) Additional Options u Smart Charging (CANoe) Ethernet Car2x Additional Protocols Summary
30
Skip topic
Smart Charging (CANoe)
TLS Support for ISO15118
u Analysis of Transport Layer Security (TLS) communication in Trace Window u When either charging station or vehicle is simulated
31
Smart Charging (CANoe)
Simulation and Test of GB/T 27930
u New GB/T 27930 Interaction Layer (GBT27930_IL.dll)
u Easy to use, minimal configuration effort u Simple control during measurement via CAPL u Various options for fault injection u Direct access to the simulated node from a test unit u Requires Option .J1939
32
Agenda
Release Information General Automotive Options Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) u Ethernet Car2x Additional Protocols Summary
33
Skip topic
Ethernet
OPEN Alliance ECU Test Specification (TC8)
u As of version 12, CANoe .Ethernet includes a configuration for running the OPEN Alliance test specification for Ethernet controllers
u The tests covers mostly OSI/ISO layer 2 to 7 u The test procedure and the test definition are completely
disclosed and can be adjusted with the help of vTESTstudio u The configuration does not require extra licensing u A simulation of the DUT (Golden Device) is included, too
34
Ethernet
New Features of Ethernet Interfaces
u CANoe .Ethernet is prepared to support the upcoming features coming with the release of the new Ethernet interface firmware u All new Ethernet interface configuration procedure
> External configuration, interface configuration is not necessarily part of CANoe configuration > and configuration of the hardware is independent of the tool and can be used across-the-board
u Direct link between the each simulated node and interface hardware
> Improved topology related stimulation without topology dependency in CANoe
u Improved network representation/handling in CANoe compared to former application channel representation of the network
> Support of multiple "paths" to one network
u Changed measurement concept from "view all" to "view only what is of interest" to leverage computing resources
35
Ethernet
New Features of Ethernet Interfaces (cont.)
Segmentation Elements
Network Physical Port
Virtual Port
38
Ethernet
New Features of Ethernet Interfaces (cont.)
COM
ANT
ExampleNET
HPC1
SEN R
SEN L
39
VN56xx
ExampleNET
CANoe #1
Simulation Setup
DISP
Analysis Port List
ExampleNET
CANoe #2
Simulation Setup
HPC2 ECU
Analysis Port List
HU
Agenda
Release Information General Automotive Options Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet u Car2x Additional Protocols Summary
40
Skip topic
Car2x
New Features and Improvements
u Map Window u New control, more modern look and feel u Intersection visualization based on SPaT and MAP message u Support of fragmented MAP messages u Visualization of Waypoints u Improved filtering mechanisms u Caching of map tiles u "Zoom to fit" button
41
Car2x
New Features and Improvements
u Application Messages u Car2xSystem Demo supports the latest CAM/DENM/CDD version (due to EU delegated act) u System Demo contains intersections with SPaT/MAP messages
u VN4610 u Supports DCC (Decentralized Congestion Control) in order to send messages prioritized u High precision timestamps are now supported
u Car2x Network Explorer u Shows the value table of the data elements of application messages u Improved CAPL code generation for the data elements with copy-paste operation
u Scenario Editor u Nodes and attributes in timeline can be expanded/collapsed u Child attributes are supported now
u Security u Supports Request / Response mechanism for ETSI EN 103097 version 1.3.1
42
Agenda
Release Information General Automotive Options Testing (CANoe) VT System (CANoe) Additional Options Smart Charging (CANoe) Ethernet Car2x u Additional Protocols Summary
43
Skip topic
Additional Protocols
J1939-82 Compliance Test (Revision 2015, CANoe)
u Tables A3 - A8 and A10 are fully implemented u Simple configuration, detailed and
easy to understand interpretation; u Individual protocol blocks can be tested, e.g.:
u Address Claiming / Commanded Address u Name Management u Transport Protocol u Request / Response
44
Additional Protocols
J1939
u Convenient CAPL functions to support J1939 Diagnostic Messages u Assembling DTCs from their parts (SPN / FMI / OC) u Splitting of DTCs into their components (SPN / FMI / OC) u Filling diagnostic messages with DTCs u Extraction of DTCs from diagnostic messages u Test Feature Set (CANoe): waiting for diagnostic messages with any combination of SPN / FMI / OC
u New CAPL functions for fault injection (CANoe) u Delayed reaction to received messages u Manipulation of any received or sent messages u Direct access to the simulated node from a test unit u All J1939 / ISO11783 Interaction Layers supported
> J1939 > ISO11783 > Virtual Terminal > Task Controller > File Server
45
Additional Protocols
ISO11783 (CANoe)
u New File Server Interaction Layer (ISO11783_FS_IL.dll): u Easy to use, minimal configuration effort u Simple control during measurement via CAPL u Various options for fault injection u Direct access to the simulated node from a test unit
u Tractor Implement Management (TIM): u Implementation of the latest specification (FDIG 1.01) u TIM Simulator: all specified functions and facilities can be controlled and monitored via dedicated panels
> 32 Aux Valves > Rear and Front PTOs > Rear and Front Hitches > Vehicle Speed > External Guidance
u Improvement of Task Controller Interaction Layer (ISO11783_TC_IL.dll) u additional CAPL functions to verify the structure of a device description
46
Summary
Main Benefits
u New Communication Concept:
u New graphical configuration u Switching of endpoints (simulated, remote, measured)
u Ethernet
u TC8 support u TLS support u New hardware
u Testing
u CANoe comes with viewer version of vTESTstudio u Export test reports to PDF u VT System: New Switch Matrix Module
u New Option .Smart Charging Standards:
u GB/T 27930 (China) u DIN 70121/ISO 15118 (Europe, USA)
u Option .Sensor: SENT Piggy for VN1640A/VN1530
u No VT necessary for smaller projects
u Option .CANopen: New and completely reworked configuration u Option .Car2x: New map window
47
For more information about Vector and our products please visit www.vector.com
Author: PND8 Vector Germany
48
© 2019. Vector Informatik GmbH. All rights reserved. Any distribution or copying is subject to prior written approval by Vector. V1.0 | 2019-04-24
Microsoft PowerPoint for Office 365