SaniAlarm for Sani Pump Models: 002, 013, 014, 011 and 008 (Battery Not Included) Use and Care Manual

Saniflo 050 859925002503 0859925002503 1001053930

Accessories

8 hours ago — The 18" extension pipe was designed with the idea of simplifying the installation process making it easier to hide the pump and plumbing behind the wall.

SANIACCESSORIES

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 1 Pages, 193.69KB

Document Document

SANIACCESSORIES

Extension pipe PART NO 030

Sanialarm PART NO 050
This solution alerts homeowners of high water levels inside the pump. The Sanialarm helps prevent inappropriate use and encourages prompt intervention.

2-3/4" OD

The Sanialarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound until it is switched off or the problem is rectified. The Sanialarm is battery operated and can be installed on most Saniflo macerating units and drain water pumps.
* Suitable for use with Saniplus, Sanibest Pro, Sanipack, Sanigrind Pro and Sanivite

1

2

A
5" OD

A
4" OD

The 18" extension pipe was designed with the idea to simplify the installation process making it easier to hide the pump and plumbing behind the wall. It has an inner gasket which connects to the rear spigot of the Saniflo toilet creating a sealed connection. The diameter of the extension pipe is 4" (5" bell housing). It comes with a paintable decorative trim that surrounds the pipe and provides a perfect finish.
* Suitable to be used with the Saniaccess3, Saniplus, Sanibest Pro and Saniaccess2 systems

3

Install two AA batteries (not included)

Insert the tube and position the Sanialarm on top.

Drill a 3/8" diameter hole on top of the case where indicated.
4
Turn the switch to the ON position.

Descaler PART NO 052
Prolongs the life of all Saniflo pumps by cleaning and disinfecting. This special formula is perfectly designed for cleaning and descaling the heart
of your system and its internal components.

· Specifically created for use with Saniflo products
· Laboratory formulated with phosphoric acid
· Concentrated solution for optimum cleaning power
· Regular usage prolongs unit life and maintains efficiency
· Harmless to septic tank operation

Disconnect from the main
power.

Pour the solution inside the bowl and flush the toilet
once.

Let the solution sit inside the toilet and pump for a couple of
hours.

Connect to main power supply and flush the toilet a couple of times.

Protection for your peace of mind.
51