Symbols Used in this Manual The following is the description for the symbols used in this manual. Description refers to: TV FUNCTIONS DVD FUNCTIONS TV: Analog TV operation DVD: Playback of DVD-video DTV: Digital TV operation CD: Playback of audio CD • If neither symbol appears under the function heading, operation is applicable to both.
For more details refer to the device's manual. Send status of the TV to the HDMI CEC enabled device. When switching the TV's external input or channel.
Español Français English
LCD Television Built-in DVD Player Users Guide
LT-19D200 19" class (18.5" Diagonal)
HIGH DEFINITION TELEVISION
Important Note:
In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user's guide in a convenient place for future reference. Keep the carton and original packaging for future use.
Model No: Serial Number:
0209TKH-FU-FU
5 Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
CAUTION RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The caution marking is located on the rear or bottom of the cabinet.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the apparatus's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.
Important Safety Instructions
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in
accordance with the manufacture's instructions. 8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing on it. A falling unit can cause serious injury or even death.
FCC WARNING This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna. 2) Increase the separation between the apparatus and receiver. 3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
2
EN
English
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus.
Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the instructions.
LASER SAFETY This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION:USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION:VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION:INSIDE, NEAR THE DECK MECHANISM.
IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE · Do not handle the AC power cord with wet hands. · Do not remove this unit's cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to
this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center. · Do not pull on the AC power cord when disconnecting it from an AC outlet. Grasp it by the plug. · Do not put your fingers or objects into the unit. LOCATION AND HANDLING · The openings should not be blocked by placing the unit on a bed, sofa, carpet, rug, or other similar surface. · Do not install the unit near or over a radiator or heat register. · Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration. · Avoid a place with drastic temperature changes. · Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit. · Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction. DEW CONDENSATION WARNING · Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry. - The unit is moved from a cold place to a warm place. - Under conditions of high humidity. - After heating a cold room. NOTE ABOUT RECYCLING · This unit's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. · Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes.
5 Trademark Information
· HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
· Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
· Products that have earned ENERGY STAR® are designed to protect the environment through superior energy efficiency.
·
is a trademark of DVD Format/Logo Licensing Corporation.
3
EN
INTRODUCTION
5 Supplied Accessories
remote control (RM-C-2152)
batteries (AA x 2)
AA AA
Screw for attaching the stand x 3 (FPH34120)
· If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual.
5 Attaching the Stand
You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction.
1 2 Spread a thick and soft cloth over a table as shown below.
Align the 2 stand hooks with the two hooks under the bottom of the main
Place the main unit face down onto it. Make sure not to damage the screen.
unit (shown by arrow ), then slide
the stand in the direction as shown
by arrow until it stops and the 4
mounting holes are aligned.
Make sure not to put the AC power
cord between the stand and the unit.
3 Drive Screws in the 3 threaded holes at the bottom of the stand until they are tight.
screw holes
front side
To remove the stand from this unit
Unscrew the screws indicated by above ""screw holes.
After the screws are removed pull the stand up toward the rear of
the unit. Be careful not to drop the stand when you remove it.
Note:
· When attaching the stand, ensure that all screws are tightly fastened. If the stand is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit. · Make sure to use a table which can support the weight of this unit and is larger than this unit. · Make sure the table is in a stable location.
5 Symbols Used in this Manual
The following is the description for the symbols used in this manual. Description refers to:
TV FUNCTIONS
DVD FUNCTIONS
TV : Analog TV operation
DVD : Playback of DVD-video
DTV : Digital TV operation
CD : Playback of audio CD
· If neither symbol appears under the function heading, · If neither symbol appears under the function heading,
operation is applicable to both.
operation is applicable to both.
5 Tilt Stand
-2.5°
10°
You can adjust the stand to change the angle of the unit (-2.5° to 10°).
4
EN
English
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
5 Features
TV
· DTV/TV/CATV - You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels.
· Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the TV screen.
· Autoscan - This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.
· Child Lock - This feature allows you to block children's access to inappropriate programs.
· Closed Caption Decoder - Built-in closed caption decoder displays text for closed caption supported programs.
· MTS/SAP Tuner - Audio can be selected from the remote control.
· Auto Shut Off Function - If there is no signal input from the antenna terminal and no operation for 15 minutes, the unit will turn off automatically.
· Sleep Timer - This feature will automatically turn off the power of the unit at a specific time.
· Choices for On-screen Language - Select your on-screen language: English, Spanish or French.
· Stereo Sound Function · PLL Frequency Synthesized Tuning
- Provides free and easy channel selection and lets you tune directly to any channel using the number buttons on the remote control.
· Various Adjustment for Picture and Sound - Customizes image quality to suitable for your room and sets the sound as your preference.
· HDMI Input · Component Video Input · PC Input · S-video Input · AV Input · Digital Audio Output · Headphone Audio Output
DVD
· Dolby Digital Sound - Enjoy Dolby Digital multi-channel surround sound
when you connect the unit to your Dolby Digital decoder. · Still / Fast / Slow / Step Playback - Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames. · DVD Menus in a Desired Language - You can display DVD menus in a desired language, if available on a DVD-video. · Auto Power Off - If there is no operation for 20 minutes, the unit will turn itself off automatically. · Parental Lock - Block the viewing of DVD-video unsuitable for children. · Resume Playback - Lets you resume playback from the point at which playback was stopped. · Bit Rate Indication · DRC (dynamic range control) - You can control the range of sound volume.
Accessing from [MODE] button
During playback
· Subtitles in a Desired Language - You can select a desired language for displaying subtitle, if that language is available on a DVD-video. · Selecting a Camera Angle - You can select the desired camera angle, if a DVD contains sequences recorded from different angles. · Zoom - Allows you to enlarge the size of picture image. · Black Level Adjustment · Virtual Surround · Search - chapter search / title search / track search / time
search · Marker - The part on the disc designated by user can be called back. · Repeat - chapter / title / track / all / A-B
Accessing from [MODE] button
In Stop mode
· Program Playback for audio CD - You can program the order of tracks to play them back in designated order. · Random Playback for audio CD - This unit can shuffle the order of tracks to play them back in randomly.
Accessing from [AUDIO] button
During playback
· Choices for Audio Language and Stereo Sound Function - Select your desired languages or stereo sound function when different options are available on your disc.
5
EN
INTRODUCTION
5 Contents
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
INTRODUCTION
Supplied Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Attaching the Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Tilt Stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Remote Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Installing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
PREPARATION
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Connection to Cable Receiver or Satellite Box . . . . . . . . . .10 External Device Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Plug In the AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
TV Functions
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
WATCHING TV
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Volume Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Still Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Switching Each Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Switching Audio Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 TV Screen Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 TV Screen Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
OPTIONAL SETTING
Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Autoscan. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Channel List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Manual Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Antenna Confirmation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Picture Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Closed Caption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Child Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 PC Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Current Software Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
DVD Functions
OPERATING DVD
Playable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Unplayable Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Paused and Step-by-step Playback . . . . . . . . . . . . . . . . . . . . .36 Fast Forward / Fast Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 Search Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 Repeat Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 Repeat A-B Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 On-screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
DVD SETTING
DVD Language Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 DVD Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 Parental Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 Reset to the Default Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
TROUBLESHOOTING
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
INFORMATION
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Cable Channel Designations . . . . . . . . . . . . . . . . . . . . . . . . . . .53 General Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Electrical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Other Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
6
EN
English
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
5 Control Panel
DVD
S AND BY
POWER ON
8 9 10 11
7
6
5
4321
5 Terminals
18
17
*
12
19
HDMI 2
20
13
21
14
22
15
23
HEAD PHONE
16
24
25
Note:
* service terminal (service use only) · User should not connect any devices to the service terminal such as digital camera, keyboard, mouse, etc. (because these will not work).
1. y (power) (p. 15) Press to turn the unit on and off.
2. B (play) (p. 36) Press to begin the disc playback.
3. C (stop) (p. 36) Press to stop the disc playback.
4. A (eject) (p. 36) Press to eject the disc.
5. CH - / + (p. 16 / p. 17) Press to select channels or move up (+) / down (-) through the main menu items.
6. SETUP (p. 15 / p. 44) Press to display the main menu.
7. VOL - / + (p. 16) Press to adjust the volume or move right (+) / left (-) through the main menu items.
8. DVD indicator Lights up orange when the disc is inserted.
9. STAND BY indicator Lights up red when power is off.
10. POWER ON indicator Lights up blue when power is on.
11. infrared sensor window Receives infrared rays transmitted from the remote control.
[Side Panel]
12. HDMI 2 input jack (p. 10 / p. 11) HDMI connection from HDMI device.
13. S-video input jack (p. 12) S-video cable connection from an external device.
14. video input jack (p. 13) RCA video cable connection from an external device.
15. audio input jack (p. 12 / p. 13) RCA audio cable connection from an external device.
16. headphone jack Headphone connection for personal listening.
[Rear Panel]
17. antenna input jack (p. 10) RF coaxial cable connection for your antenna or cable TV signal.
18. disc loading slot (p. 36) Insert the disc with the label side facing forward.
19. AC power cord (p. 14) Connect to a standard AC outlet to supply power to this unit.
20. PC input jack (p. 14) VGA cable connection for PC.
21. HDMI 1 input jack (p. 10 / p. 11) HDMI connection for HDMI or DVI device.
22. component video and audio input jack (p. 10 / p. 12) RCA component video cable and RCA audio cable connection from an external device.
23. digital audio output jack (p. 13) Coaxial digital cable connection for a decoder or an audio receiver.
24. audio input jack for PC connection (p. 14) Mini-plug audio cable connection for PC.
25. audio input jack for HDMI 1 (p. 11) RCA audio cable connection from a DVI device. (For HDMI 1 input jack only)
7
EN
INTRODUCTION
5 Remote Control Function
13
1
14
15
16 2
17
3 4 5 6
7 8
9 10
11 12
18
19
20 8
21 9
22 23
24 25
1. MUTE (p. 16) Press to turn the sound on and off.
2. Number buttons (p. 16) · Press to select channels. · Press to select chapter, title (DVD), or track (CD) directly. - (hyphen) · Press to shift the subchannel from the main channel. +10 button · Press to select 10 or higher number of chapters.
3. SETUP (p. 15 / p. 44) Press to display the main menu.
4. s / B / K / L (p. 15) Press to move left / right / up / down through the items.
5. ENTER (p. 15) Press to decide the command of setting when the main menu is displayed.
6. INFO (p. 18 / p. 41) Digital mode (DTV) · Press to display the channel information, signal type and TV setting. Analog mode (TV) · Press to display the channel number, signal type and TV setting. External input mode · Press to display the external input mode, signal type and TV setting. DVD mode · Press to display the current status.
7. CHANNEL - / + (p. 16 / p. 17) Press to select channels and the external input mode.
8. REV E / FWD D (p. 37) Press to begin slow forward or slow reverse playback during the pause mode (DVD) and search forward or backward through the disc.
9. SKIP H / G (p. 38) Press to skip forward or backward chapters, titles (DVD) or tracks (CD).
8
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
10. EJECT A (p. 36) Press to eject the disc.
11. DISC MENU (p. 36) Press to display the menu on the disc.
12. TITLE (p. 36) Press to display the title menu (DVD).
13. INPUT SELECT (p. 17) Press to access connected external devices like a BD/DVD recorder.
14. POWER (p. 15) Press to turn the unit on and off.
15. AUDIO (p. 17 / p. 42) Digital mode (DTV) · Press to select the audio language. Analog mode (TV) · Press to select the audio mode. DVD mode · Press to select the audio language (DVD), or sound mode (CD).
16. SLEEP (p. 16) Press to activate the sleep timer.
17. CH RETURN (p. 16) Press to return to previously viewed channel.
18. SCREEN MODE (p. 19) Press to select aspect ratio available for the TV screen.
19. BACK (p. 18) Press to return to the previous menu operation.
20. VOLUME - / + (p. 16) Press to adjust the volume.
21. PLAY B (p. 36) Press to begin the disc playback.
22. STOP C (p. 36) Press to stop the disc playback.
23. PAUSE F (p. 17) TV mode · Press to pause screen image. DVD mode · Press to pause the disc playback.
24. CLEAR (p. 39) · Press to clear the numbers entered incorrectly. · Press to cancel the point A for A-B repeat. · Press to remove the track number in program input (CD).
25. MODE (p. 5) · Press to arrange the playing order or playback randomly (CD). · Press to set the black level (DVD) and the virtual surround on or off. · Press to change the camera angle to see the sequence being played back from different angle (DVD). · Press to search chapter, title (DVD), track (CD) or time. · Press to set the marker. · Press to repeat playback chapter, title (DVD), track, disc (CD) repeatedly or between designated point A and B. · Press to magnify the part of picture (2x and 4x : DVD). · Press to select the subtitles on the disc (DVD).
5 Installing the Batteries
Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.
Battery Precautions:
· Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device. · Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or
old batteries with fresh ones. · If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. · Do not try to recharge batteries; they can overheat and rupture.
9
EN
PREPARATION
No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord.
5 Antenna Connection
Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.
e.g.) VHF / UHF antenna
rear of this unit
RF coaxial cable or
cable TV signal
* Once connections are completed, turn on the unit and begin initial setup. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to "Initial Setup" on page 15.)
Note:
· If you have any question about the DTV's antenna, visit www.antennaweb.org for further information. · Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters). Contact your local
electronics store for these items. · For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the antenna input jack before moving the unit. · If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than
settop versions. · To switch your reception source easily between antenna and cable, install an antenna selector. · If you connect to the cable system directly, contact the CATV installer.
5 Connection to Cable Receiver or Satellite Box
Use an HDMI or an RCA component video cable to connect the HDMI or the component video input jack of the unit to the HDMI or the component video output jack of the cable receiver / satellite box. If you connect to the unit's component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video connector.
e.g.)
HDMI OUT
HDMI cable
satellite dish or
ANT IN
RF coaxial cable
or
AUDIO OUT
L
R
COMPONENT VIDEO OUT
Y
Pb/Cb Pr/Cr
(green) (blue) (red)
or
HDMI 2
side or rear of this unit
cable TV signal including PPV
TE EO CM
cable receiver / satellite box
(green) (blue) (red)
RCA component video cable and RCA audio cable
* You can also connect this unit to the cable receiver or satellite box other than the HDMI or the component video output jack because they might have different output jacks.
* Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the clear QAM may differ depending on the cable / satellite provider. For more information, please contact your cable /
10 satellite provider.
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility.
5 External Device Connection
[HDMI Connection]
HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional protocol used in HDMI.
HDMI CEC on this TV is compliant with "High-Definition Multimedia Interface Specification". The TV does not support HDMI CEC functions that are not listed below. The TV does not guarantee to support use of all HDMI CEC enabled devices. Devices that are not enabled to HDMI CEC cannot be controlled with this TV.
Control the TV using the HDMI CEC enabled device Turn the TV on and switch to the video source of the operating device. Switch to the video source of the operating device.
Control the HDMI CEC enabled device
Send status of the TV to the HDMI CEC
using the TV
enabled device
Turn off the operating device by pressing When switching the TV's external input
the power button for three seconds or
or channel.
more, and turning off the TV.
When switching the TV's menu language.
* Some device may not support this
* Information regarding behaviour of the
function. For more details refer to the
device when status is received, refer to
device's manual.
the external device's manual.
e.g.)
TI LE 5 HAPT R 5 EPEAT A B
BD/DVD recorder with the HDMI output jack
HDMI OUT
HDMI cable
HDMI 2
or
side or rear of this unit
Note:
· This unit accepts 480i / 480p / 720p / 1080i video signals, and 32kHz / 44.1kHz / 48kHz audio signals. · This unit accepts only 2 channel audio signal (LPCM). · You need to select "PCM" for the digital audio output of the device you connected or check the HDMI audio setting.
There may be no audio output if you select "Bitstream", etc. · This unit only accepts signals in compliance with EIA861.
[HDMI-DVI Connection]
Use an HDMI-DVI conversion cable to connect the unit to external video devices equipped with DVI output jack.
e.g.)
rear of this unit
DVI OUT
S ER O PM
cable receiver or satellite box with the DVI output jack
AUDIO OUT
L
R
HDMI-DVI conversion cable
To HDMI1 input jack only
RCA audio cable
Note:
· This unit accepts 480i / 480p / 720p / 1080i video signals. · HDMI-DVI connection requires separate RCA audio connections as well. · Audio signals are converted from digital to analog for this connection. · DVI does not display 480i image that is not in compliance with EIA/CEA-861/861B.
11
EN
PREPARATION
No supplied cables are used in this connection: Please purchase the necessary cables at your local store.
[Component Video Connection]
RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit's component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video connector.
e.g.)
(green) (blue) (red)
rear of this unit
T TLE 5 CHAP ER 15 REPE T -B
BD/DVD recorder with the component video output jack
Y
Pb/Cb Pr/Cr
COMPONENT VIDEO OUT
AUDIO OUT
L
R
RCA component video cable
(green) (blue) (red)
Note:
· This unit accepts 480i / 480p / 720p / 1080i video signals.
RCA audio cable
[S-video Connection]
S-video connection offers good picture quality for video devices connected to the unit. If you connect to the unit's S-Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector.
e.g.)
side of this unit
AUDIO OUT
L
R
S-VIDEO OUT
S-video cable
T TLE 5 CHAP ER 15 REPE T -B
BD/DVD recorder with the S-video output jack
RCA audio cable
Note:
· If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.
12
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
No supplied cables are used in this connection: Please purchase the necessary cables at your local store.
[Video Connection]
RCA video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit's Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector. When the audio jack of the video device is monaural, connect an RCA audio cable to the audio L input jack.
e.g.)
side of this unit
camcorder video game
AUDIO OUT
L
R
VIDEO OUT
RCA video cable
ST REO
VCR
STAND BY
RCA audio cable
Note:
· If you connect to the S-video input jack and the video input jack at the same time, the S-video connection will have priority.
[Audio Output Connection (for digital broadcasting only)]
If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.
e.g.)
rear of this unit
Dolby Digital decoder
DIGITAL AUDIO COAXIAL IN
digital audio coaxial cable
13
EN
PREPARATION
No supplied cables are used in this connection: Please purchase the necessary cables at your local store.
[PC Connection]
This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini plug audio cable as well.
e.g.)
rear of this unit
VGA cable should be with ferrite core.
VGA cable
personal computer
stereo mini plug audio cable
The following signals can be displayed:
Format VGA SVGA XGA
Resolution 640 x 480 800 x 600
1,024 x 768
Refresh rate 60Hz 60Hz 60Hz
Format WXGA
Other formats or non-standard signals will not be displayed correctly.
Note:
· Please purchase the VGA conversion cable that has a ferrite core. · The following operations may reduce noise. - Attach a ferrite core to the AC power cord of your PC. - Unplug the AC power cord and use the built-in battery of your PC.
Resolution 1,280 x 768 1,360 x 768
Refresh rate 60Hz 60Hz
5 Plug In the AC Power Cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.
rear of this unit
AC outlet
AC power cord
Caution:
· Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
Note:
· Each time you plugged in the AC power cord, any operations will not be performed for a few seconds. This is not a malfunction.
14
EN
English
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.
TV Functions
5 Initial Setup
This section will guide you through the unit's initial setting which includes selecting a language for your on-screen menu and autoscan, which automatically scans and memorizes viewable channels.
4 Use [Cursor s/ B] to select the desired location setting, then press [ENTER].
Before you begin: Make sure the unit is connected to antenna or cable.
Initial Setup Select "Retail" or "Home" for your ocation
1 After making all the necessary connections, press [POWER] to turn on the unit.
Retail
Home
Select
NTER Enter
· This operation may take a few moments.
2 Use [Cursor K/L] to select the on-screen language from the choices on the right side of the TV screen. (English / Español / Français)
Initial Setup Select the language for setup display Elija el idioma de ajuste Sélect onner langue écran config
Engl sh Español Français
Select
E TER Enter
SETUP
Skip
· "Initial Setup" menu on step 3 will be displayed in the selected language after you press [ENTER].
3 Use [Cursor K/L] to select "Antenna" for TV channels or "Cable" for CATV channels, then press [ENTER].
Initial Setup
Make sure the antenna is connected o"ANT IN" jack Se ect he dest nation of "ANT IN" jack
Antenna Cable Skip
Antenna
Cab e
Or
ANT N
Select
ENT R Enter
BACK
Back
SETUP
Skip
· "Autoscan" will begin.
Initial Setup
Now the system s scanning for channels p ease wait Autoscan w ll take up to 20 m nu es to complete
0%
Analog channels Digital channels
0ch 0ch
SETUP
Skip
· Select "Retail", the unit will be set up with predefined setting for retail displays. In this setting, the power consumption may possibly exceed the limited requirement of the ENERGY STAR® qualification.
· Select "Home", the unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality according to your preference.
· When the initial setup is completed, the lowest memorized channel with the confirmation message of the location setting will be displayed on the TV screen.
Note:
· If you connect the cable system directly, contact the CATV installer.
· If you press [POWER] or [SETUP] during autoscan, this setting will be canceled.
· The initial autoscan function can be executed for either "Antenna" or "Cable" only once. When you change the connection (Antenna / Cable), set autoscan again. (Refer to page 20.)
· If there is no signal input from the antenna terminal and no operation for several seconds after you turn on the unit, "Helpful Hints" appears. Follow the instructions listed on the TV screen.
Initial Setup
No channel s registered Try Autoscan again? Ver fy that you have a cable connected o he "ANT IN" jack on he back of the TV the channel nstallation p ocess searches this connection If you are using a cable or satel ite box please conf rm the input which you have connec ed the box and press the "INPUT SELECT" key on the remote con rol to se ect he appropr ate source input
Retry Later
Select
EN ER Enter
SETUP
Skip
· You must set "Home" in step 4. Otherwise, the settings of picture and sound quality you adjusted will not be memorized after you turn off the unit.
After an initial setup is completed...
· If you want to scan the channels automatically again, refer to "Autoscan" on page 20.
· You can add the desired channels unmemorized by "Autoscan". Refer to "Manual Register" on page 21.
· If you want to change to another language, refer to "Language Selection" on page 22.
· If you want to change the Location setting, refer to "Location" on page 33.
15
EN
WATCHING TV
5 Channel Selection
Select channels by using [CHANNEL - / +] or [the Number buttons]. · To select the memorized channels, use [CHANNEL - / +] or [the Number buttons]. · To select the non-memorized channels, use [the Number buttons]. To Use [the Number buttons]
TV
- When selecting channel 11
DTV
- When selecting digital channel 11-1 Be sure to press [-] before entering the subchannel number.
5 Volume Adjustment
This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described.
Use [VOLUME - / +] to adjust the audio volume.
Volume 30
The volume bar will be displayed at the bottom of the TV screen when adjusting the volume. · The volume bar will automatically disappear in a few
seconds. Press [MUTE] to turn off and on the sound.
Mute
· Press [CH RETURN] to return to the previously channel.
About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. Not all digital TV broadcasts are high definition (HD). To confirm whether your watching TV program is in HD, refer to the program guide, contact your cable / satellite provider or local TV stations.
NTSC Air time
(analog mode)
CH4 (Soccer)
6:00pm
ATSC
(digital mode)
CH4-1 (Soccer)
"Mute" is displayed on the TV screen for a few seconds.
Press [MUTE] again or [VOLUME - / +] to recover the original volume.
5 Sleep Timer
The sleep timer can be set to automatically turn off the unit after an incremental period of time.
1 Press [SLEEP] to set the sleep timer.
Sleep
Off
main channel
6:30pm
CH4 (Soccer)
CH4-1 (Soccer) CH4-2 (News) CH4-3 (Tennis)
main channel
7:00pm CH4 (Soccer)
subchannel
CH4-1 (Soccer)
subchannel
7:30pm CH4 (Soccer)
main channel
CH4-1 (Soccer)
CH4-2 (News)
8:00pm
main channel
subchannel
can be changed by using
[CHANNEL - / +].
What is the subchannel? By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per main channel since digital broadcasting technology distinguishes between multiple channels broadcast by a single network.
Note:
· "No Signal" will appear on the TV screen after the subchannel broadcast is over.
· "Audio only program" message will appear on the TV screen, when you receive only sound signal.
16
EN
Sleep timer display appears on the TV screen.
2 Press [SLEEP] repeatedly to change the amount of time until shut off.
Sleep
120min.
You can set your unit to turn off after a set period of time (from 30 to 120 minutes).
· Each press of [SLEEP] will increase the time by 30 minutes.
· After setup, the sleep timer display can be called up for checking by pressing [SLEEP].
To cancel the sleep timer Press [SLEEP] repeatedly until "Sleep Off" is displayed on the TV screen.
Note:
· The sleep timer display will automatically disappear in a few seconds.
· When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled.
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Still Mode
You can pause the image shown on the TV screen.
Press [PAUSE F] to pause the image shown on the TV screen.
Still
· The sound output will not be paused. · If no signal is detected or protected signal is received
during still mode, the image remains paused and the sound output will be muted. · The still function will be released after 5 minutes. To cancel still mode, press any button except [POWER].
5 Switching Each Input Mode
You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access external devices when they are connected to the unit.
Press [INPUT SELECT] or [CHANNEL ] repeatedly to cycle through the input modes.
DTV/TV channel Video
Component
or
HDMI1
HDMI2
PC
· Pressing [CHANNEL ] reverses the direction of the input modes.
5 Switching Audio Mode
This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode.
TV
Press [AUDIO] to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.
11
SAP / STEREO
When all audio are available
SAP / STEREO
SAP / MONO
SAP / STEREO When stereo and monaural audio are available
MONO / STEREO MONO / STEREO When SAP and monaural audio are available
SAP / MONO
SAP / MONO
When only monaural audio is available
STEREO SAP MONO
MONO (cannot be switched)
: Outputs stereo-audio : Outputs second audio program : Outputs mono-audio
DTV
1 Press [AUDIO] to display the currently selected language and the number of available languages.
11-1
English 1/3
2 Press [AUDIO] repeatedly to cycle through the available audio languages.
· Available languages differ depending on the broadcast. "Other" is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.
Note:
· [AUDIO] does not control external audio devices. · The information display will automatically disappear in a
few seconds.
17
EN
WATCHING TV
5 TV Screen Information
You can display the currently selected channel or other information such as the audio mode on the TV screen.
TV
In the analog mode, the current channel number and the audio mode are displayed.
DTV
In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed.
Press [INFO].
11
SAP / STEREO 480i SD 44:33
TV-PG DLSV CC
· The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen.
· To clear the display, press [INFO] again. You can also press [BACK].
Press [INFO] to display the details of the currently selected program.
Broadcasting information
The following information is displayed.
12
3
4
A Day of Memories
KABC
A quarter-century ago,which may now qualify as the good old days of newspapering,run-of-paper sales accounted for 80 percent of the industry's advertising revenues. Department stores and supermarket were
TV: TV-14
11-1
English 1/2
100880i HD 116:9
Rating
CCC
5 6, 7, 8
9 10
1 program title 2 program guide
(The program guide added to broadcasting information is displayed to a maximum of 4 lines.) 3 broadcast station 4 channel number 5 audio language (Refer to "Switching Audio Mode" on page 17.) 6 effective scanning lines and scan mode 7 digital TV format 8 program aspect ratio 9 CC (not available if closed caption is set to "Off") 10 child lock rating
Note:
· When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll.
· "No description provided." is displayed when the program guide is not provided.
· While the program guide is displayed, the closed caption function is interrupted.
· In external input mode, the following screen is displayed; e.g.) When an external device is connected to VIDEO input jack.
Video
448800ii SD
TV-PG DLSV CCC
· The information display will automatically disappear in 1 minute.
18
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
5 TV Screen Display Mode
4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal.
Press [SCREEN MODE] repeatedly to switch the TV aspect ratio.
For 4:3 video signal
For 16:9 video signal
English
Sidebar
Full
Full
Zoom
Wide
Cinema
Sidebar
Display a 4:3 picture at its original size. Sidebars appear
on both edges of the screen.
Full
Display a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fill the screen.
Cinema
Display a 4:3 picture at a 16:9 size; the picture is
stretched horizontally and vertically to fill the screen.
This crops out the top and bottom of the picture.
Wide
Display the picture with its center at the original size
and the edges stretched horizontally to fill the screen.
Expand
Cinema
Full Display a 16:9 picture at its original size.
Zoom Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio.
Cinema Display a vertically stretched picture.
Expand Display a horizontally stretched picture.
For PC input signal
Normal
Full
Dot By Dot
Normal Display a proportionately stretched picture. Sidebars appear on both edges of the screen. Full Display a picture that is stretched out of proportion to fill the screen. Dot By Dot Display a picture in its original size.
19
EN
OPTIONAL SETTING
5 Main Menu
This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.
Press [SETUP].
5 Autoscan
If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setting, or if you restore the DTV channel you deleted, you will need to perform autoscan.
Before you begin: Make sure the unit is connected to antenna or cable.
1 Press [SETUP] to display the main menu.
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
PICTURE You can adjust the picture quality. (Refer to "Picture Adjustment" on page 23.)
SOUND You can adjust the sound quality. (Refer to "Sound Adjustment" on page 24.)
CHANNEL · You can automatically scan the viewable channels.
(Refer to "Autoscan" on page 20.) · You can skip the undesired channels when selecting
the channels using [CHANNEL -/ +]. (Refer to "Channel List" on page 21.) · You can add the channels that were not scanned by the autoscan. (Refer to "Manual Register" on page 21.)
DETAIL · You can change the display format for closed
caption, which displays the dialogue of a TV program or other information across the TV screen. (Refer to "Closed Caption" on page 25.) · You can set the viewing limitations. (Refer to ``Child Lock" on page 28.) · You can adjust the position, stability and clarity of the PC screen. (Refer to "PC Settings" on page 32.) · You can select the energy saving mode. (Refer to "Energy Saving Mode" on page 33.) · When you adjust the desired "PICTURE" and "SOUND" mode, you must switch the setting from "Retail" to "Home". (Refer to "Location" on page 33.) · You can confirm the version of the software currently used in this unit. (Refer to "Current Software Info" on page 34.)
LANGUAGE You can change the language (English, Spanish, French) displayed on the main menu. (Refer to "Language Selection" on page 22.)
DVD You can customize some functions for the disc playback. Make sure the player is in stop mode. (Refer to "DVD SETTING" section on page 44.)
20
EN
2 Use [Cursor K/L] to select "CHANNEL" , then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Autoscan", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL
Channel
Autoscan Channel List Manual Reg ster Antenna
LANGUAGE
DVD
Use [Cursor K/L] to select an appropriate option, then press [ENTER].
PICTURE S OUND CHANNEL DETAIL
Autoscan
Autoscan will rescan all channels Autoscan will take up to 20 minutes to complete
Select the destination of "ANT IN" jack
Antenna
Back Antenna Cable
LANGUAGE Cable
Or
DVD
ANT N
· When aerial antenna is connected, select "Antenna". · When connected to CATV, select "Cable". · "Autoscan" will begin.
Now the system is scanning for Channe s please wait Autoscan w ll take up to 20 minutes to complete
75%
Analog channels
10ch
Digital channels
6ch
SETUP
Exit
· When the scanning and memorizing are completed,
the lowest memorized channel will be displayed.
Note: · After setting "Autoscan", using [CHANNEL - / +] on the
remote control skips unavailable programs automatically. · If you connect the cable system directly, contact the CATV
installer. · If you press [POWER] or [SETUP] during autoscan, the
setting will be canceled. · Even if "Autoscan" is completed, the channel setting will be
lost if the AC power cord is unplugged before turning off the unit by pressing [POWER]. · The PIN Code will be required once you set a PIN Code in the "Child Lock" (Refer to page 28). · If you want to change your PIN Code, follow the instruction of "New Password" (Refer to page 31).
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Channel List
The channels selected here can be skipped when selecting the channels using [CHANNEL -/ +]. Those channels can still be selected with [the Number buttons].
1 Press [SETUP] to display the main menu.
5 Manual Register
This function lets you add the channels that were not added by the autoscan due to the receptible condition at the initial setting.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "CHANNEL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
2 Use [Cursor K/L] to select "CHANNEL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Channel List", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL
Channel
Autoscan Channel List Manual Register Antenna
LANGUAGE
DVD
3 Use [Cursor K/L] to select "Manual Register", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL
Channel
Autoscan Channel List Manual Register Antenna
LANGUAGE
DVD
4 Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Channel List
Highlight channe s for Ch Up/Down key selection
DTV 6 27
DTV 8 9
DTV 48 58
DTV 67
BACK
Ch Select E TER Watch/Skip Back
· The channel display for the removed channel darkens. You will not be able to select the channel again using [CHANNEL / ].
· To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.
· When you remove a main channel, its subchannels are removed as well.
Note:
· The channel with the "DTV" indicated on the display is ATSC. Otherwise the channel is NTSC.
5 Press [SETUP] to exit.
4 Use [the Number buttons] to enter the number of the channel you want to add, then press [ENTER].
11
PICTURE S OUND CHANNEL DETAIL
Manual Register
For analog channels select a channel to register using number keys
For digital channe s you must perform Autoscan function
Reg ster
LANGUAGE
DVD
Ch Change
BACK
Back
5 Press [SETUP] to exit.
Note:
· If setup completes successfully, "Added to the channel list" is displayed.
· If external input is used, it is not possible to register the channel and "Unavailable" will be displayed on the TV screen.
· By using [CHANNEL - / + ], you can select the memorized channels only.
21
EN
OPTIONAL SETTING
5 Antenna Confirmation
DTV
This function lets you check the digital signal strength of each channel.
1 Press [SETUP] to display the main menu.
5 Language Selection
You can choose English, Spanish, or French as your on-screen language.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "CHANNEL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Antenna", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL
Channel
Autoscan Channel List Manual Register Antenna
LANGUAGE
DVD
4 Use [the Number buttons] or [CHANNEL / ] to select the channel for which you want to check the digital signal strength.
2 Use [Cursor K/L] to select "LANGUAGE", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "English", "Español" or "Français", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL
Language Se ect the language for setup disp ay Elija el idioma de ajuste Sélect onner langue écran config
English Español França s
LANGUAGE
DVD
4 Press [SETUP] to exit.
11-1
PICTURE S OUND
Antenna
Back
CHANNEL DETAIL
Current 50 Max 50
LANGUAGE
DVD
CH -+
Ch Change
Note:
· If you need the English menus instead of the Spanish or French menus, press [SETUP]. Use [Cursor K/L] to select "IDIOMA" or "LANGUE", then press [ENTER]. Use [Cursor K/L] to select "English", then press [ENTER]. Press [SETUP] to exit the main menu.
· If the channel is set to analog channel or external input, you cannot confirm the antenna condition.
Video
PICTURE S OUND
Antenna
Back
CHANNEL DETAIL
Indicator s available for digital broadcasting only
LANGUAGE
DVD
CH -+
Ch Change
5 Press [SETUP] to exit.
22
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Picture Adjustment
You can adjust brightness, contrast, color, tint, sharpness and color temperature.
Before you begin: You must set "Home" in "Location" (Refer to page 33). Otherwise, the settings you adjusted will not be memorized after you turn off the unit.
1 Press [SETUP] to display the main menu. 2 Use [Cursor K/L] to select "PICTURE", then press
[ENTER].
Brightness, Contrast, Color, Tint, Sharpness,
Color Temperature Use [Cursor K/L] to select the desired setting, then use [Cursor s/B] to adjust.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select the item you want to adjust, then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Picture
Picture Mode Brightness Contrast Color Tint Sharpness Color Temperature
DVD
Personal 30 60 36 0 0
Normal
4 Adjust the picture quality.
Picture Mode Use [Cursor K/L] to select the desired setting, then press [ENTER]. (``Personal", ``Standard", ``Sports", ``Movie" and ``Game")
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Picture
Picture Mode Brightness Contrast Color Tint Sharpness Color Temperature
DVD
Personal Standard Sports Movie Game
Brightness
Brightness 30 Adjust
Move
ENT R Enter
Contrast
Contrast 60 Adjust
Move
ENTER Enter
Color
Color
36
Adjust
Move
ENTER Enter
Tint
Tint
0
Adjust
Move
ENTER Enter
Sharpness
Sharpness
0
Adjust
Move
ENTER Enter
Color Temperature
Color Temp. Normal Adjust
Move
ENTER Enter
5 Press [SETUP] to exit.
Cursor s
to decrease brightness
Cursor B
to increase brightness
to decrease contrast
to increase contrast
to decrease to increase color intensity color intensity
to add red
to add green
to soften
to sharpen
to add warm to add cool
colors
colors
Note:
· To cancel picture adjustment, press [SETUP]. · Only the "Personal" setting can be adjusted.
23
EN
OPTIONAL SETTING
5 Sound Adjustment
You can adjust the sound mode, equalizer and some other sound functions.
Before you begin: You must set "Home" in "Location" (Refer to page 33). Otherwise, the settings you adjusted will not be memorized after you turn off the unit.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "SOUND", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select the sound type you want to adjust, then press [ENTER].
PICTURE SOUND CHANNEL
Sound
Sound Mode Equalizer TV Speakers
DETAIL
LANGUAGE
DVD
Standard Ext Amp
4 Adjust the following items.
Sound Mode Use [Cursor K/L] to select the desired setting, then press [ENTER]. ("Personal ", "Standard ", "Movie ", "Music "and "News ")
TV Speakers Select the audio output from the unit's speakers, or not. If your amplifier compatible with the CEC function is connected to this unit using an HDMI cable, some part of the sound operations such as volume up can access synchronized by using this unit's remote control.
Use [Cursor K/L] to select the desired option, then press [ENTER].
PICTURE SOUND CHANNEL DETAIL LANGUAGE DVD
TV Speakers
"On": Sound will be output from he TV speakers
"Off": Sound will not be output from he TV speakers
"Ext Amp": Operation s possib e by connecting to the HDMI CEC compa ible amp with a HDMI cable For deta ls look in the user manual
On Off Ext Amp
On Off Ext. Amp
The sound will be output from the unit's speakers.
The sound will not be output from the unit's speakers.
This function allows you to control audio output from CEC-compatible devices with the unit's remote control.
5 Press [SETUP] to exit.
Note:
· To cancel sound adjustment, press [SETUP]. · We do not guarantee 100% interoperability with other
brands of CEC compliant devices.
PICTURE SOUND CHANNEL
Sound
Sound Mode Equalizer TV Speakers
DETAIL
LANGUAGE
DVD
Personal Standard Movie Music News
Equalizer Adjust tonal quality for each frequencies. Use [Cursor s / B] to select the specific frequency and use [Cursor K/L] to adjust the level, then press [ENTER].
PICTURE
Equalizer
SOUND
0
0
0
0
0
CHANNEL
DETAIL
LANGUAGE DVD
120Hz 500Hz 1 5kHz 5kHz 10kHz
24
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Closed Caption
You can view closed captioning (CC) for TV programs, movies and news. Closed caption refers to text of dialogue or descriptions displayed onscreen.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "DETAIL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Closed Caption", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Detail
Closed Caption Child Lock PC Sett ngs Energy Sav ng Mode Location Current Software Info
DVD
On Home
See the following description for setting each item.
Closed Caption
PICTURE
Caption Service
Off
A
S OUND
Digital Caption Service
Off
B
CHANNEL
Caption Style
C
DETAIL
LANGUAGE
DVD
A... "A. Caption Service" B... "B. Digital Caption Service" C... "C. Caption Style"
D page 25 D page 26 D page 26
A. Caption Service
4 Use [Cursor K/L] to select "Caption Service", then press [ENTER].
PICTURE
Closed Caption
Caption Service
Off
S OUND
Digital Caption Service
Off
CHANNEL
Caption Style
DETAIL
LANGUAGE
DVD
5 Use [Cursor K/L] to select the desired closed caption, then press [ENTER].
PICTURE S OUND CHANNEL
Closed Caption
Caption Service Digital Caption Service Caption Style
DETAIL
LANGUAGE
DVD
Off CC1 CC2 CC3 CC4 Text1 Text2 Text3 Text4
Caption mode
CC1 and Text1; are the primary caption and text services. The captioning or text is displayed in the same language as the program's dialogue (up to 4 lines of script on the TV screen, where it does not obstruct relevant parts of the picture).
CC3 and Text3; serve as the preferred data channels. The captioning or text is often a secondary language.
CC2, CC4, Text2 and Text4; are rarely available and broadcasters use them only in special conditions, such as when "CC1" and "CC3" or "Text1" and "Text3" are not available. · There are 3 display modes according to programs: Paint-on mode: Displays input characters on the TV screen immediately. Pop-on mode: Once characters are stored in memory, they are displayed all at once. Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines).
6 Press [SETUP] to exit.
25
EN
OPTIONAL SETTING
B. Digital Caption Service
C. Caption Style
DTV
In addition to the basic closed caption described on page 25, DTV has its own closed caption called digital caption service. Use this menu to change the settings for digital caption service.
4 Use [Cursor K/L] to select "Digital Caption Service", then press [ENTER].
PICTURE
Closed Caption
Caption Service
Off
S OUND
Digital Caption Service
Off
CHANNEL
Caption Style
DETAIL
LANGUAGE
DVD
DTV
You can change the caption style such as font, color or size, etc.
4 Use [Cursor K/L] to select "Caption Style", then press [ENTER].
PICTURE
Closed Caption
Caption Service
Off
S OUND
D gital Caption Service
Off
CHANNEL
Caption Style
DETAIL
LANGUAGE
DVD
5 Use [Cursor K/L] to select the desired digital caption service, then press [ENTER].
PICTURE S OUND CHANNEL
Closed Caption
Caption Service Digital Caption Service Caption Style
DETAIL
LANGUAGE
DVD
Off Service1 Service2 Service3 Service4 Service5 Service6
Off Service 1~6
Select if you do not want digital caption service. This is the default.
Select one of these before changing any other item in "Closed Caption" menu. Choose "Service1" under normal circumstances.
6 Press [SETUP] to exit.
5 Use [Cursor K/L] to select "User Setting", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
User Setting Font Sty e Font Size Font Color Font Opacity Background Color Background Opacity Edge Color Edge Type
Off Font0 Middle Wh te So id Black So id Black None
6 Use [Cursor K/L] to select "On", then press [ENTER].
PICTURE
Caption Style
User Setting
On
S OUND
Font Style
Off
CHANNEL
Font Size Font Color
DETAIL
Font Opacity Background Color
LANGUAGE
Background Opacity
DVD
Edge Color Edge Type
Note:
· "Digital Caption Service" that you can switch differs depending on the broadcast description.
7 Use [Cursor K/L] to select an item, then press [ENTER]. Then use [Cursor K/L] to select the desired setting and press [ENTER].
Picture display
26
EN
ABCDEFGHIJKL
Edge (Edge Color and Edge Type) Font (Font Style, Font Size, Font Color and Font Opacity or Transparency)
Background (Background Color and Background Opacity or Transparency)
· The setting description for each item is shown on the next page.
· Review your setting choice made on the next page by looking in the upper right corner of the displayed setting box (not all selections show the differences selected).
English
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
Font Style Closed Captioning font style can be changed as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Co or Edge Type
Font Size Font size of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Co or Edge Type
Large Middle Small
Font Color
Font color of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Co or Edge Type
White Black Red Green Blue Yellow Magenta Cyan
Edge Color Edge color of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Color Edge Type
White Black Red Green Blue Yel ow Magenta Cyan
Edge Type
Edge type of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Color Edge Type
None Raised Depressed Uniform L Shadow R Shadow
8 Press [SETUP] to exit.
Font Opacity Font opacity of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Co or Edge Type
Solid Flash Translucent Transparent
Background Color Background color of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Color Edge Type
White B ack Red Green Blue Yellow Magenta Cyan
Background Opacity Background opacity of the displayed caption can be switched as below.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Caption Style
Closed Caption
User Setting Font Style Font Size Font Color Font Opacity Background Color Background Opacity Edge Co or Edge Type
Solid Flash Translucent Transparent
Note:
· To show the closed caption on your TV screen, broadcast signal must contain the closed caption data.
· Not all TV programs and commercials have the closed caption or all types of the closed caption.
· Captions and texts may not match the TV voice exactly. · Changing channels may delay the closed caption for a few
seconds. · Adjusting or muting the volume may delay the closed
caption for a few seconds. · Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen action. This is not a malfunction. · The caption or text characters will not be displayed while the main menu or functions display is shown. · If a black box appears on the TV screen, this means that the closed caption is set to the text mode. To clear the box, select "CC1", "CC2", "CC3", "CC4" or "Off". · If the unit receives poor quality television signals, the captions may contain errors, or there might be no captions at all. Some possible causes of poor quality signals are: - Automobile ignition noise - Electric motor noise - Weak signal reception - Multiplex signal reception (ghosts or screen flutter) · The unit retains the closed caption setting if the power fails. · Closed caption will not be displayed when you are using an HDMI connection. · When the unit receives special effects playback signal (i.e., Search, Slow and Still) from a VCR's video output channel (CH3 or CH4), the unit may not display the correct caption or text.
27
EN
OPTIONAL SETTING
5 Child Lock
Child lock reads the ratings for programs, then denies access to the programs which exceed the rating level you set. With this function, you can block certain programs inappropriate for children and any channels or external input modes can be invisible.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "DETAIL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Child Lock", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Detail
Closed Caption Child Lock PC Sett ngs Energy Saving Mode Location Current Software Info
DVD
On Home
4 Use [the Number buttons] to enter the 4-digit numbers for your PIN Code.
PICTURE
Child Lock
S OUND
CHANNEL DETAIL
Enter password.
LANGUAGE
DVD
PIN Code
----
BACK
Back
· When you have not set up your PIN Code, enter 0000. · When the PIN Code is correct, "Child Lock" menu is
displayed.
See the following description for setting each item.
Child Lock
PICTURE
Channel Lock
A
S OUND
MPAA Rating
B
CHANNEL
TV Rating
C
Canadian Eng ish Rating
DETAIL
Canadian French Rating
LANGUAGE
Downloadable Rating Clear Downloadable Rating
DVD
New Password
D
A... "A. Channel Lock" B... "B. MPAA Rating" C... "C. TV Rating" D... "D. New Password"
D page 29 D page 29 D page 30 D page 31
Note:
· When you select a rating and set it to "Block", the higher ratings will be blocked automatically. The lower ratings will be available for viewing.
· When you set the highest rating to "View", all ratings turn to "View" automatically.
· To block any inappropriate programs, set your limits in "MPAA Rating", "TV Rating" and "Downloadable Rating".
· The child lock setting will be retained after a power failure (except the access code reverts to 0000).
· If the rating is blocked, will appear. · "Downloadable Rating" will be available when the unit
receives a digital broadcast using the new rating system. · If the broadcasting signal does not have the
Downloadable Rating information, "Downloadable Rating is currently not available." will appear. This message will also appear when you try to access "Downloadable Rating" after you have cleared the Downloadable Rating information, and the new information has not been downloaded since. · The Canadian rating systems on this unit based on CEA-766-A and the Canadian Radio-Television and Telecommunications Commission (CRTC) policy.
28
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
A. Channel Lock
Particular channels or external input modes can be invisible in this function.
B. MPAA Rating
MPAA Rating is the rating system created by MPAA (Motion Picture Association of America).
5 Use [Cursor K/L] to select "Channel Lock", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Child Lock
Cannel Lock MPAA Rat ng TV Rating Canadian English Rat ng Canadian French Rating Downloadable Rating C ear Downloadable Rating New Password
5 Use [Cursor K/L] to select "MPAA Rating", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Child Lock
Cannel Lock MPAA Rating TV Rating Canadian Eng ish Rating Canadian French Rating Downloadable Rating Clear Downloadable Rating New Password
6 Use [Cursor K/L] to select the desired rating, then press [ENTER] repeatedly to switch between "View" and "Block".
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Channel Lock
V deo Component HDMI 1 HDMI 2 PC DVD 11 1 DTV
DVD
Select
BACK
E TER View/B ock Back
7 Press [SETUP] to exit.
6 Use [Cursor K/L] to select the desired rating, then press [ENTER] repeatedly to switch between "View" and "Block".
PICTURE S OUND CHANNEL DETAIL LANGUAGE
MPAA Rating
X NC 17 R PG 13 PG G NR
DVD
Select
BACK
EN ER View/Block Back
Rating X NC-17
R
PG-13 PG G NR
Category Mature audience only No one under 17 admitted Restricted; under 17 requires accompanying parent or adult guardian Unsuitable for children under 13 Parental guidance suggested General audience No rating
7 Press [SETUP] to exit.
29
EN
OPTIONAL SETTING
C. TV Rating
5 Use [Cursor K/L] to select "TV Rating", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Child Lock
Cannel Lock MPAA Rat ng TV Rating Canadian English Rat ng Canadian French Rating Downloadable Rating C ear Downloadable Rating New Password
6 Use [Cursor K/L/s/B] to select the desired rating, then press [ENTER] repeatedly to switch between "View" and "Block".
7 Press [SETUP] to exit.
PICTURE
TV Rating
S OUND CHANNEL DETAIL LANGUAGE
TV MA TV 14 TV PG TV G TV Y7 TV Y
DVD Select
FV V S L D
BACK
ENT R View/Block Back
To set the sub ratings As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block specific elements of programming. To set the sub ratings, follow the step below.
Use [Cursor K/L/s/B] to select the desired rating, then press [ENTER] repeatedly to switch between "View" and "Block".
PICTURE
TV Rating
S OUND CHANNEL DETAIL LANGUAGE
TV MA TV 14 TV PG TV G TV Y7 TV Y
DVD Select
FV V S L D
BACK
NTER View/Block Back
Rating TV-MA TV-14 TV-PG TV-G
TV-Y7
TV-Y
Category Mature audience only Unsuitable for children under 14 Parental guidance suggested General audience
Appropriate for all children 7 and older
Appropriate for all children
higher lower
Sub Rating
Category
FV
Fantasy Violence
V
Violence
S
Sexual Situation
L
Coarse Language
D
Suggestive Dialogue
Rating TV-Y7
TV-PG TV-14 TV-MA
TV-PG, TV-14
Note:
· Blocked sub rating will appear beside the main rating category in "TV Rating" menu.
· You cannot block a sub rating (D, L, S or V) if the main rating is set to "View".
· Changing the category to "Block" or "View" automatically changes all its sub ratings to the same ("Block" or "View").
30
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
D. New Password
Although the default code "0000" is supplied with the unit, you can set your own PIN Code.
5 Use [Cursor K/L] to select "New Password", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
Child Lock
Channel Lock MPAA Rat ng TV Rating Canadian English Rat ng Canadian French Rating Downloadable Rating C ear Downloadable Rating New Password
6 Press [the Number buttons] to enter the new 4-digit PIN Code. · Enter PIN Code again in "Confirm password." entry field.
PICTURE
New Password
S OUND CHANNEL DETAIL
Enter password.
----
- - - - Confirm password.
LANGUAGE
DVD
PIN Code
BACK
Back
7 Press [SETUP] to exit.
Note:
· Make sure new PIN Code and confirm PIN Code must be exactly the same. If they are different, the space is cleared for reentering.
· Your PIN Code will be erased and return to the default (0000) when a power failure occurs. If you forget the PIN Code, unplug the AC power cord for 10 seconds to restore the PIN Code to 0000.
English
31
EN
OPTIONAL SETTING
5 PC Settings
This function lets you adjust the PC screen position, clock and phase during PC input.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "DETAIL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "PC Settings", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Detail
Closed Caption Child Lock PC Sett ngs Energy Sav ng Mode Location Current Software Info
DVD
On Home
5 Adjust the setting.
Auto Adjustment Use [Cursor K/L] to select "Adjust", then press [ENTER].
PICTURE S OUND CHANNEL
Auto Adjustment
To automatical y synchronize the phase and clock on the TV and PC
Cancel Adjust
DETAIL
LANGUAGE
DVD
· The horizontal/vertical position, clock and phase of the PC screen are automatically adjusted.
Horizontal Position, Vertical Position Use [Cursor s/B] to adjust.
Horizontal Position
H. Position 0 Adjust
Move
+
EN ER Enter
Cursor s
to move PC screen left
Cursor B
to move PC screen right
Vertical Position
V. Position 0 Adjust
Move
+
EN ER Enter
to move PC screen down
to move PC screen up
4 Use [Cursor K/L] to select the setting you want to adjust, then press [ENTER].
PICTURE S OUND
PC Settings Auto Ad ustment
Hor zontal Pos t on
0
CHANNEL
Vertical Position
0
DETAIL
Clock
0
Phase
0
LANGUAGE
DVD
Clock, Phase Use [Cursor {/B] to adjust "Clock" setting to stabilize the PC screen and "Phase" setting to improve the clarity of the PC screen.
Clock
Clock
0
Adjust
Phase
Phase
0
Adjust
Move
EN ER Enter
Move
EN ER Enter
Cursor s
Cursor B
to decrease to increase setting value setting value
6 Press [SETUP] to exit.
Note:
· You may not obtain an appropriate screen with "Auto Adjustment" for some signals. In this case, adjust the settings manually.
· Adjust "Phase" setting after "Clock" setting has been properly adjusted.
32
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
5 Energy Saving Mode
You can set whether the power consumption is saved or not.
1 Press [SETUP] to display the main menu.
English
5 Location
When you select "Retail", the power consumption may possibly exceed the limited requirement of the ENERGY STAR® qualification.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "DETAIL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
2 Use [Cursor K/L] to select "DETAIL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Energy Saving Mode", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Detail
Closed Caption Child Lock PC Sett ngs Energy Saving Mode Location Current Software Info
DVD
On Home
3 Use [Cursor K/L] to select "Location", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Detail
Closed Caption Child Lock PC Settings Energy Saving Mode Location Current Software Info
DVD
On Home
4 Use [Cursor K/L] to select the desired mode, then press [ENTER].
Energy Saving Mode
PICTURE
S OUND
On
When set to "On", power
consumption is reduced by
Off
decreasing backl ght
CHANNEL
brightness
DETAIL
LANGUAGE
DVD
On
Select if you want to reduce the power consumption.
The power consumption may possibly
Off
exceed the limited requirement of the
ENERGY STAR® qualification.
5 Press [SETUP] to exit.
4 Use [Cursor K/L] to select the desired location, then press [ENTER].
PICTURE S OUND CHANNEL
Location
Location Home is recommended for normal home use In the Retail Store mode, all settings are fixed
DETAIL
LANGUAGE
DVD
Retail Home
5 Press [SETUP] to exit.
33
EN
OPTIONAL SETTING
5 Current Software Info
This function shows what version of the software currently used.
1 Press [SETUP] to display the main menu.
2 Use [Cursor K/L] to select "DETAIL", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
3 Use [Cursor K/L] to select "Current Software Info", then press [ENTER].
PICTURE S OUND CHANNEL DETAIL LANGUAGE
Detail
Closed Caption Child Lock PC Sett ngs Energy Saving Mode Location Current Software Info
DVD
On Home
4 Confirm the version of the software currently used.
PICTURE
Current Software Info
S OUND CHANNEL
Release Vers on: CJ19OD 1 0
DETAIL
LANGUAGE
DVD
Back
5 Press [SETUP] to exit.
34
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
OPERATING DVD
DVD Functions
5 Playable Media
Media Type DVD-VIDEO DVD-RW
DVD-R
CD-DA
CD-RW
CD-R
English
Logo
Recorded Signal
Media Size
digital video (MPEG2) 5 inches (12 cm)
digital audio
5 Unplayable Media
NEVER play back the following discs. Otherwise, malfunction may result! 3 inch (8 cm) disc, DVD-RAM, DVD-audio, CD-i, photo CD, Video CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers, CD-ROM for personal computers, the discs with labels, scratches, stains, blemishes, etc., HD DVD, Blu-ray Disc, CD-RW/-R with MP3 files and CD-RW/-R with JPEG files including Kodak Picture CD.
On the following disc, the sound MAY NOT be heard. super audio CD
Any other discs without compatibility indications
Note:
· Unfinalized discs cannot be played back. · For DVD-RW/R, discs recorded in the VR (video recording) format cannot be played back. Only the finalized video format discs can be played back. · Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs. · Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered. · Do not use a single CD adaptor which makes 3 inch (8 cm) to 5 inch (12 cm) disc. · You can play back discs with the marks listed in "Playable Media". If you use non-standardized discs, this unit may not play them back or the sound and video quality will be compromised. · If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.
Region Codes
This unit has been designed to play back DVD with region 1. DVD must be labeled for ALL regions or for region 1 in order to play back on the unit. You cannot play back DVD that are labeled for other regions. Look for the symbols on your DVD. If these region symbols are not on your DVD, you cannot play back the DVD in this unit.
The number inside the globe refers to region of the world. A DVD labeled for a specific region can only be played back on the unit with the same region code.
Color Systems
DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in PAL color systems.
35
EN
OPERATING DVD
These operations are accessible by remote control. Some may also be accessible by controls on the main unit.
5 Playback
Before you begin: Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel.
1 Press [POWER] to turn on the unit.
2 Insert a disc with label facing forward.
5 Disc Menu
DVD
Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD.
To display the DVD menu, press [DISC MENU] and use [Cursor K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]). To display the top menu, press [TITLE] and use [Cursor K / L / s / B] to select an item, then press [ENTER] (or [PLAY B]).
label
Note:
· Menu operations may vary depending on the disc.
Refer to the manual accompanying the disc for more details.
· In case the DVD was recorded on both sides, make sure the label of the side you want to play back is facing forward.
3 The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc. e.g.) DVD
DVD
· Press [PLAY B] if the unit does not go to the DVD mode.
4 The unit starts playback. · If playback does not start automatically, press [PLAY B] again.
5 Press [STOP C] to stop playback temporarily.
5 Resume Playback
Press [STOP C] during playback. Resume message will appear on the TV screen. Press [PLAY B]. Playback will resume from the point at which playback was stopped.
Resume ON
Press 'PLAY' to play from here. To play the beginning, press 'S TOP' first and then 'PLAY'.
Note:
· To cancel resume, press [STOP C] one more time in the stop mode. On some discs, [STOP C] will not work while the resume message appears. Please wait until the message disappears. · The resume information will be kept even when the unit is turned off. However, ejecting the disc will cancel the resume feature. Playback will start at the beginning the next time you insert the disc.
· If playback remains stopped for 20 minutes, the unit will turn itself off automatically when "AUTO POWER OFF" is set to "ON".
6 Press [EJECT A] to eject the disc.
Note:
· " " may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.
· Some DVD may start playback from title 2 or 3 due to specific programs.
· During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
· When you cannot remove the disc, you may try either following operations. - Press and hold [EJECT A] on the unit for more than 5 seconds. - Unplug the AC power cord and plug it in again, then press [EJECT A]. It will take about 10 seconds to eject the disc, while that the unit will not respond to any key commands.
36
EN
5 Paused and Step-by-step Playback
Press [PAUSE F] during playback. · Playback will be paused and sound will be
muted. To continue playback, press [PLAY B].
DVD
Each time you press [PAUSE F] in the pause mode, the disc goes forward one frame at a time. To continue playback, press [PLAY B].
Note:
· Set "STILL MODE" to "FIELD" in the "OTHERS" menu if pictures in the pause mode are blurred. (Refer to page 47.)
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Fast Forward / Fast Reverse
Press [FWD D] or [REV E] repeatedly
during playback to select the desired
E 1
forward or reverse speed.
To continue playback, press [PLAY B].
Note:
· Set "STILL MODE" to "FIELD" in the "OTHERS" menu if pictures in the fast playback mode are blurred. (Refer to page 47.)
· Fast forward / fast reverse speed varies with disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and 1(2x), 2(8x) and 3(30x) on audio CD.
· For DVD, sound will be muted during this function. · For audio CD, sound will be intermittent during the search.
5 Slow Forward / Slow Reverse
DVD
Press [FWD D] or [REV E] repeatedly
during the paused mode to select the
1
desired forward or reverse speed.
To continue playback, press [PLAY B].
Note:
· Set "STILL MODE" to "FIELD" in the "OTHERS" menu if pictures in the slow playback mode are blurred. (Refer to page 47.)
· Slow forward / slow reverse speed varies with disc. Approximate speed is 1(1/16x), 2(1/8x) and 3(1/2x).
· The sound will be muted during this function.
5 Zoom
DVD
The zoom function allows you to enlarge the video image and to pan through the enlarged image.
3 Once a desired zoom factor is set, use [Cursor K / L / s / B] to slide the zoomed picture across the TV screen.
4 To exit zoom, repeat steps 1 to 2 above and press [ENTER] repeatedly until "OFF" appears.
Note:
· The gray box with an inner blue box that shows during zoomed playback is the position guide indicates the position of the zoomed image within the overall image. Position guide stays on the TV screen until you press [ENTER]. Press [ENTER] one more time to recall the position guide when disappears.
· Zoom function does not work while the disc menu is displayed.
· 4x zoom is not available on some discs. · Zoom function is also available during pause mode.
1 During playback, press [MODE] repeatedly until " " appears. OFF (ZOOM)
· The picture becomes twice as large.
2 Press [ENTER] repeatedly to change the zoom factor, "2x" or "4x". 4x (ZOOM)
37
EN
OPERATING DVD
5 Search Functions Chapter / Title / Track Search
You can select chapters, titles or tracks on the disc.
1 During playback, press [MODE] repeatedly until " " / " " appears. · If you want to perform the title search, use [Cursor K / L] repeatedly until " " appears. e.g.) DVD /12 (S EARCH)
2 Press [the Number buttons] to select your desired chapter, title or track within 60 seconds.
Using [SKIP H / G]
1 During playback, press [SKIP H / G] repeatedly until a desired chapter, title or track will be selected. current chapter/track (CH) (TR)
CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4
[SKIP H]
[SKIP G]
or
or current title
(TT)
TT 1 TT 2 TT 3 TT 4
[SKIP H]
[SKIP G]
(If the disc has no chapter.)
2 Playback will start automatically from the chapter, title or track you selected.
Note:
· [SKIP H / G] are not available when playback is stopped.
/12 (S EARCH)
To play back a single-digit chapter, title or track when there are more than 10 chapters, titles or tracks, press [ENTER] after entering the chapter, title or track number.
3 Playback will start automatically from the chapter, title or track you selected.
Note:
· Chapter, title or track search can only be performed during playback or when the unit has kept the resume information. It cannot be performed in the stop mode.
· The total number of chapters / titles / tracks in your disc; with less than 10 chapters / titles / tracks, press the chapter / title / track number directly. To play a double-digit chapter / title / track, press the chapter / title / track number.
· Track search is not available for programmed or random playback.
38
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
Time Search
You can select the desired time which the disc is played back from.
1 During playback, press [MODE] repeatedly until " " / " " appears. e.g.) DVD /12 (S EARCH)
2 Use [Cursor K/ L] repeatedly until " " appears.
TOTAL 1:29:00
3 Press [the Number buttons] to select your desired time lapse within 60 seconds.
English
Direct Search
Press [the Number buttons] to select your desired chapter, title or track.
Note:
· To select a single-digit chapter, title or track number, press the number directly.
· To select double digit chapter, title or track number: - If the disc contains more than 9 and less than 100 chapter, title or
track, press [+10] first, then enter the double digit chapter, title or track number. (e.g., for track 26, press [+10], [2] and [6].)
TOTAL 1:29:00
4 Playback will start automatically from the time you selected.
Note:
· When there is no need to enter a number, "0" appears automatically. For example, "0: 0_: _ _" appears in the time search menu if the total time of the title or track is less than 10 minutes.
· Press [CLEAR] to erase the incorrect input at step 3. · Time search can only be performed during playback or
when the unit has kept the resume information. It cannot be performed in the stop mode.
5 Repeat Playback
Repeat function is available only during playback.
1 During playback, press [MODE] repeatedly until " " appears.
OFF (REPEAT)
2 Press [Cursor K / L] to change the repeat mode.
DVD
OFF
(repeat off)
CHAPTER (current chapter repeat)
TITLE (current title repeat)
CD
OFF
(repeat off)
TRACK (current track repeat)
ALL
(entire disc repeat)
3 Press [BACK] to exit.
39
EN
OPERATING DVD
5 Repeat A-B Playback
You can repeat playback between A and B on a disc.
1 During playback, press [MODE] repeatedly until " A B " appears. A B OFF (A B REPEAT)
2 Press [ENTER] at your desired starting point (A).
A B A- (A B REPEAT)
5 Programmed Playback
CD
You may determine the order in which tracks will play back.
1 In stop mode, press [MODE] repeatedly until "PROGRAM" menu appears.
PROGRAM CD DA
TOTAL 0 00 00
ENTER OK
PLAY CLEAR
T 1 3:31 T 2 4:28 T 3 4:19 T 4 3:58 T 5 4:12 T 6 4:02 T 7 3:55
1/ 3
T 1 3:31
1/ 1
3 Press [ENTER] at your desired ending point (B).
A B A-B (A B REPEAT)
· Point B should be in the same title or track as point A. · Within a few seconds, the section A-B will begin to play back repeatedly.
4 To cancel repeat A-B playback, press [MODE] repeatedly until " A B " appears. Press [ENTER] so "OFF" appears.
Note:
· Repeat setting (except "ALL") will be cleared when moving to another title or chapter, track.
· During programmed playback, repeat setting will be effective for the tracks in the program.
· Repeat playback or repeat A-B playback may not available with some discs.
· Repeat A-B playback does not function during other repeat mode. · To cancel point A, press [CLEAR] at step 2 in
"Repeat A-B Playback". · Stopping playback will cancel repeat A-B playback.
5 Random Playback
CD
This function shuffles the playing order of tracks instead of playback in the sequence.
1 In stop mode, press [MODE] repeatedly until "RANDOM" menu appears.
RANDOM CD DA
TOTAL 0 45 55
PLAY
RANDOM PROGRAM no ndication
2 Press [PLAY B] to start random playback.
Note:
· To repeat the current track in the random mode, follow the steps 1 and 2 in "Repeat Playback" on page 39 and select " TRACK".
· To repeat the entire random selections, follow the steps 1 and 2 in "Repeat Playback" on page 39 and select " ALL".
40
EN
2 Use [Cursor K / L] to select a desired track, then press [ENTER] to store.
· Additional tracks may be on other screens. Use [Cursor K / L] to go on to the next / previous pages.
· Repeat this step until you have selected all the tracks
you wish to play back in the program.
or
PROGRAM CD DA
T 15 3:18 T 16 4:24 ALL CLEAR
TOTAL 0 08 22
T 4 3:58 T 16 4:24
EN ER/OK
PLAY CLEAR
3/ 3 T 16 4:24
1/ 1
· Up to 99 tracks can be ordered. · If 8 or more tracks were in a program, use
[SKIP H / G] to see all the tracks.
3 Press [PLAY B] to start programmed playback.
Note:
· Press [CLEAR] to erase the last track in the program if you make an error.
· To erase all programmed tracks at once, select "ALL CLEAR" and press [ENTER] at step 2.
· While a program is being played back, [STOP C] works as follows: - Pressing [STOP C] once: The track will be in the resume standby mode. Next time you press [PLAY B], the playback will resume from the point where it is stopped in the programmed playback. - Pressing [STOP C] twice: Resume mode will be canceled. Next time you press [PLAY B], playback will restart from the first track in the original order. However, your
programmed playback can be restarted when you follow
the above steps. (Your programs are still stored until either
the disc is ejected or the unit is turned off.) - On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
· To repeat the current track in the program, follow the steps 1
and 2 in "Repeat Playback" on page 39 and select "TRACK".
· To repeat the entire program, follow the steps 1 and 2 in
"Repeat Playback" on page 39 and select "ALL".
· Turning off the unit or ejecting the disc will erase the
program. · You cannot use [the Number buttons] to select another
track during programmed playback. Use [SKIP H / G] to select other tracks in the program.
· You cannot combine random playback with programmed
playback.
· You cannot alter a programmed order during playback.
· You can start programmed playback only while in
"PROGRAM" menu.
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 On-screen Display
You can check the information about the current disc by pressing [INFO] on the remote control.
DVD
1
11/16 0:00:00 - 0:03:30
appears only when multiangle is available on the DVD current playback status
remaining time of the current chapter elapsed time of the current chapter CH (Chapter): current chapter number / total chapters
2
1/3 0:00:00 - 1:23:45
remaining time of the current title
elapsed time of the current title TT (Title): current title number / total titles
CD
1
4/12 0:03:21 - 0:02:15 T
2
4/12 0:13:45 - 0:45:40 T
current playback status
remaining time of the current track elapsed time of the current track
TR (Track): current track number / total tracks
ALL: current track number / total tracks current repeat setting appears only when the repeat setting is active
T : Track repeat A : All tracks repeat A B : A-B repeat remaining time of the entire disc
elapsed time of the entire disc
3
T L1
3
layer number, appears only when
playing a 2-layered disc L0 : Layer 0 is playing L1 : Layer 1 is playing
Note:
· When you are playing back an audio CD in program or random mode, " PROGRAM" (or " RANDOM") will be
current repeat setting appears
displayed instead of 2 .
only when the repeat setting is active
5 Special Settings
C : Chapter repeat T : Title repeat
Subtitle Language
A B : A-B repeat
bit rate indication for the amount
DVD
of audio and video data currently being read
This unit allows you to select a subtitle language (if available) during DVD playback.
4
1 During playback, press [MODE] repeatedly until
" " appears.
2 Use [Cursor K/ L] repeatedly until your desired
language appears.
1.ENG / 6 (S UBTITLE)
subtitles can be varied on the displayed number.
current subtitles language.
· Each time you press [Cursor K/ L], the subtitle language changes as shown on the next page.
41
EN
...
OPERATING DVD
OFF (no subtitles) ENG (English subtitles) FRE (French subtitles)
3 Press [BACK] to exit.
Camera Angles
DVD
Some DVD may contain scenes which have been shot simultaneously from various angles. You can change the camera angle if " " appears on the screen. If "ANGLE ICON" is set to "OFF" in "OTHERS" menu, " " will not appear. (Refer to page 47.)
1 During playback, press [MODE] repeatedly until " " appears.
Note:
· To cancel the subtitle, select "OFF" at step 2. · If your language is not shown after pressing
[Cursor K / L] several times, the disc may not have that language. However, some discs allow you to change subtitle languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual along with the disc.) · When "NOT AVAILABLE" appears on the TV screen, it means no subtitle is recorded on the scene. · If you choose a language that has 3-letter-language code, the code will be displayed every time you change the subtitle language setting. If you choose any other languages, "---" will be displayed instead. (Refer to page 48.) · Ejecting the disc will cancel your subtitle setting.
2 Use [Cursor K/ L] repeatedly until your desired camera angle appears. 1 / 8 (ANGLE)
3 Press [BACK] to exit.
angles can be varied on the displayed number.
Audio Language
DVD
This unit allows you to select an audio language (if multiple languages are available) during DVD playback.
During playback, press [AUDIO] repeatedly until the desired language appears.
1 ENG Do by D 3/2 1ch 48k/3
audio can be varied on the displayed number. current audio language.
· Each time you press [AUDIO], the audio language changes as example below. ENG (English audio)
SPA (Spanish audio)
FRE (French audio)
Black Level Setting
DVD
Adjust the black level to make the dark areas of the TV picture brighter.
1 During playback, press [MODE] repeatedly until " " appears. OFF (BLACK LEVEL)
2 Press [Cursor K/ L] to adjust the black level.
ON (BLACK LEVEL)
ON : Makes the dark areas brighter. OFF : Shows the original picture as recorded.
...
Note:
· Some discs will only allow you to change the audio setting from the disc menu. Refer to the manual accompanying the discs for details.
· If your language is not shown after pressing [AUDIO] several times, the disc may not have that language. However, some discs allow you to change multiple audio languages setting in the disc menu. (Operation varies depending on the disc, so refer to the manual along with the disc.)
· When "NOT AVAILABLE" appears on the TV screen, it means audio language is not available.
3 Press [BACK] to exit.
Note:
· The setting will be kept even if the unit is turned off.
42
EN
English
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
Stereo Sound Mode
CD
This unit allows you to select a sound mode during CD playback.
During playback, press [AUDIO] repeatedly until the desired sound mode appears.
S TEREO
Marker Setup
This feature allows you to assign a specific point on a disc to be called back later.
To set a marker
1 During playback, press [MODE] repeatedly until " " / " " appears. e.g.) DVD
_ _ /12 (S EARCH)
· Each time you press [AUDIO], the sound mode changes as example below. STEREO (stereo sound with left and right channels) L-ch (left channel sound only)
R-ch (right channel sound only)
Note:
· Virtual surround cannot be changed when the sound mode is set to either "L-ch" or "R-ch".
Virtual Surround
You can enjoy virtual surround on your 2 channel stereo system.
1 During playback, press [MODE] repeatedly until " " appears.
OFF (S URROUND)
2 Use [Cursor K/ L] repeatedly until marker search menu appears. 1 2 3 4 5 6 7 8 9 10 AC
3 Use [Cursor s / B] to select an available marker within 60 seconds. 1 2 3 4 5 6 7 8 9 10 AC
4 When the playback reaches the point at which you want to set a marker, press [ENTER]. · Marker is now set. 2 3 4 5 6 7 8 9 10 AC
5 Press [BACK] to exit.
2 Press [Cursor K/ L] to select the sound level.
1 (S URROUND)
1 : Natural effect. 2 : Emphasized effect. OFF : No effects (original sound).
3 Press [BACK] to exit.
Note:
· The setting will be kept even if the unit is turned off. · For audio CD, virtual surround will not be effective if the
sound mode is set to something other than "STEREO". (Refer to "Stereo Sound Mode" on page 43.) · Turn down the level or select "OFF" if the sound is distorted.
To return to the marker later
1 Repeat steps 1-2 in "To set a marker". Use [Cursor s / B] to select the desired marker. e.g.) DVD
2 3 4 5 6 7 8 9 10 AC
2 Press [ENTER] at the desired marker to restart playback from the specific point which you set.
2 3 4 5 6 7 8 9 10 AC
Note:
· Marker search menu will disappear in about 60 seconds when there is no input.
· You can mark up to 10 points. · To clear a marker, select the marker to be cleared, and then
press [CLEAR]. · Ejecting the disc or turning off the power will erase all
markers. · Selecting " " at step 3 in the section "To set a marker" will
also erase all markers.
43
EN
DVD SETTING
Settings are only effective when the unit is in DVD mode and any discs should not be played back.
5 DVD Language Setting
You can change the desired language when playing back the disc.
1 Press [SETUP] to display the main menu.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
2 Use [Cursor K/ L] to select "DVD", then press [ENTER].
PICTURE
Setup
S OUND CHANNEL
Press "ENTER" key to move to DVD Setup
DETAIL
LANGUAGE
DVD
3 Use [Cursor s / B] to select " ", then press [ENTER].
SUBTITLE *1, *2
(Default: OFF)
Select the desired subtitle language.
ENTER/OK
LANGUAGE
SUBTITLE
OFF ENGLISH FRENCH SPANISH GERMAN ITALIAN SWEDISH
DISC MENU *1
(Default: ENGLISH)
Select the desired language in DVD menu.
ENTER/OK
LANGUAGE
DISC MENU
ENGLISH FRENCH SPANISH GERMAN ITALIAN SWEDISH DUTCH
LANGUAGE
AUDIO SUBTITLE DISC MENU
ENTER/OK
ORIGINAL OFF ENGLISH
4 Use [Cursor K/ L] to select the desired item, then press [ENTER].
LANGUAGE
AUDIO SUBTITLE DISC MENU
ENTER/OK
ORIGINAL OFF ENGLISH
5 Use [Cursor K/ L] to select the desired item, then press [ENTER].
Note:
· To change the on-screen language, call up "LANGUAGE" from the main menu and set the desired language. (Refer to "Language Selection" on page 22.)
*1 · Language options are not available with some discs. · If "OTHER" is selected in "AUDIO", "SUBTITLE" or
"DISC MENU" menu, press 4-digit number to enter the code for the desired language. (Refer to "Language Code List" on page 48.) · Only the languages supported by the disc can be selected. *2 · Language setting for Audio and Subtitle are not available with some discs. - Use [MODE] to select subtitles available on the DVD. - Use [AUDIO] to select audio available on the DVD. · If the DVD's default settings for audio and subtitle are the same language, the subtitles may not show unless you turn them on.
6 Press [SETUP] to exit.
AUDIO *1, *2
(Default: ORIGINAL)
Select the desired audio language.
ENTER/OK
LANGUAGE
AUDIO
ORIGINAL ENGLISH FRENCH SPANISH GERMAN ITALIAN SWEDISH
44
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 DVD Audio Setting
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD.
1 Press [SETUP] to display the main menu.
PICTURE
S OUND CHANNEL DETAIL LANGUAGE DVD
2 Use [Cursor K/ L] to select "DVD", then press [ENTER].
PICTURE
Setup
S OUND CHANNEL
Press "ENTER" key to move to DVD Setup
DETAIL
LANGUAGE
DVD
3 Use [Cursor s / B] to select " ", then press [ENTER].
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER/OK
DOWN SAMPLING
(Default: ON)
This function is available only on digital outputting of a disc recorded in 96kHz.
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER/OK
ON : When outputting in 48kHz. OFF : When outputting the original sound.
Note:
· When playing back a 96 kHz disc with the copyright protection or when ``Virtual Surround" is set to "1" or "2", the sound will be down sampled at 48 kHz even if the "DOWN SAMPLING" is set to "OFF". (Refer to "Virtual Surround" on page 43.)
DOLBY DIGITAL
(Default: BITSTREAM)
Set to "BITSTREAM" when this unit is connected to a Dolby Digital decoder.
4 Use [Cursor K/ L] to select the desired item, then press [ENTER].
DRC (dynamic range control) (Default: ON) This function is available only on the discs which are recorded in the Dolby Digital format.
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER/OK
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
ENTER/OK
BITSTREAM : Outputs Dolby Digital signals.
PCM :
Converts the Dolby Digital into PCM.
(2 channel)
5 Press [SETUP] to exit.
ON : Compress the range between soft and loud sounds.
OFF : No effects (original sound).
45
EN
DVD SETTING
5 Parental Setting
Parental setting prevents your children from viewing inappropriate materials. (password protected.) Playback will stop if the ratings exceed the levels you set.
1 Press [SETUP] to display the main menu.
PICTURE
S OUND
CHANNEL
DETAIL
LANGUAGE
DVD
2 Use [Cursor K/ L] to select "DVD", then press [ENTER].
PICTURE
Setup
S OUND CHANNEL
Press "ENTER" key to move to DVD Setup
DETAIL
LANGUAGE
DVD
3 Use [Cursor s / B] to select " ", then press [ENTER].
6 Use [Cursor K/ L] to select the desired item, then press [ENTER].
ENTER/OK
PARENTAL
PARENTAL LEVEL
ALL 8 [ ADULT ] 7 [ NC 17 ] 6 [R] 5 [ PGR ] 4 [ PG13 ] 3 [ PG ]
PARENTAL LEVEL
ALL :
All parental locks are cancelled.
8 [ADULT] : All ratings (adult / general / children)
can be played back.
7 [NC-17]-2 [G] : Only DVD intended for general use
and children can be played back.
1 [KID SAFE] : Only DVD intended for children can
be played back.
7 Press [SETUP] to exit.
PARENTAL PARENTAL LEVEL ALL
ENTER/OK
To change the password
5 Follow steps 1 to 4. Use [Cursor K/ L] to select "PASSWORD CHANGE", then press [ENTER].
4 Use [the Number buttons] to enter the 4-digit numbers for your password, then press [ENTER].
PARENTAL
PARENTAL LEVEL ALL PASSWORD CHANGE
ENTER/OK
PARENTAL Enter current password
ENTER/OK
6 Use [the Number buttons] to enter the new 4-digit password.
· If you have set password already, use [the Number buttons] to enter the current 4-digit password.
· You cannot use the default password (4737) to play back a DVD.
5 Use [Cursor K/ L] to select the "PARENTAL LEVEL", then press [ENTER].
PARENTAL PARENTAL LEVEL ALL PASSWORD CHANGE
ENTER/OK
46
EN
PARENTAL
PASSWORD Please enter a 4 digit password
0 0 0 0
ENTER/OK
Don't forget the password Press `ENTER/OK' to activate password
Note:
· DVD-video may not respond to parental lock settings. Make sure this function works with your DVD-video.
· Record the password in case you forget it. · If you forget the password, press [4], [7], [3], [7], then enter
your new password. Password will be cleared and parental levels will be set to "ALL". · A power failure will not erase your password.
7 Press [SETUP] to exit.
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Others
You can change the other functions.
1 Press [SETUP] to display the main menu.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
2 Use [Cursor K/ L] to select "DVD", then press [ENTER].
PICTURE
Setup
S OUND CHANNEL
Press "ENTER" key to move to DVD Setup
DETAIL
LANGUAGE
DVD
STILL MODE
(Default: AUTO)
Set the picture quality in the still mode.
If you select "AUTO", it automatically selects the best
resolution setting ("FRAME" or "FIELD") based on the
date characteristics of the pictures.
FIELD : FRAME :
The picture in the still mode will be stabilized. The picture in the still mode will be highly defined.
OTHERS
ANGLE ICON
ON
S TILL MODE
AUTO
AUTO POWER OFF ON
ENTER OK
3 Use [Cursor s / B] to select " ", then press [ENTER].
OTHERS
ANGLE ICON
ON
S TILL MODE
AUTO
AUTO POWER OFF ON
ENTER/OK
4 Use [Cursor K/ L] to select the desired item, then press [ENTER].
ANGLE ICON
(Default: ON)
Set to "ON" to show the angle icon when multiple
camera angles are available during DVD playback.
AUTO POWER OFF
(Default: ON)
Set to "ON" to turn this unit off automatically after 20 minutes of no use.
OTHERS
ANGLE ICON
ON
S TILL MODE
AUTO
AUTO POWER OFF ON
ENTER OK
5 Press [SETUP] to exit.
OTHERS
ANGLE ICON
ON
S TILL MODE
AUTO
AUTO POWER OFF ON
ENTER/OK
47
EN
DVD SETTING
5 Reset to the Default Setting
You can reset all the settings except for the parental setting and on-screen menu language.
1 Press [SETUP] to display the main menu.
PICTURE S OUND CHANNEL DETAIL LANGUAGE DVD
2 Use [Cursor K/ L] to select "DVD", then press [ENTER].
PICTURE
Setup
S OUND CHANNEL
Press "ENTER" key to move to DVD Setup
DETAIL
LANGUAGE
DVD
3 Use [Cursor s / B] to select " ", then press [ENTER].
INITIALIZE
Initialize? NO YES
ENTER/OK
4 Use [Cursor K/ L] to select "YES", then press [ENTER].
INITIALIZE
Initialize? NO YES
ENTER/OK
Note:
· When you want to cancel the initialization, select "NO" at step 4, then press [ENTER].
5 Press [SETUP] to exit.
48
EN
5 Language Code List
Language A-B
Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian
C-E Cambodian Catalan Chinese [CHI] Corsican Croatian Czech [CZE] Danish [DAN] Dutch [DUT] English [ENG] Esperanto Estonian
F-H Faroese Fiji Finnish [FIN] French [FRE] Frisian Galician Georgian German [GER] Greek [GRE] Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian [HUN]
I-K Icelandic [ICE] Indonesian Interlingua Interlingue Inupiak Irish [IRI] Italian [ITA] Japanese [JPN] Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean [KOR] Kurdish
L-N Laothian Latin Latvian;Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori
Code
4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851
5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166
5261 5256 5255 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 5455 5467
5565 5560 5547 5551 5557 5347 5566 5647 5669 5760 5765 5757 6469 5771 6460 5761 5767
5861 5847 5868 5860 5866 5957 5953 5965 5958 5966 5955
Language Marathi Moldavian Mongolian Nauru Nepali Norwegian [NOR]
O-R Occitan Oriya Oromo(Afan) Panjabi Pashto;Pushto Persian Polish [POL] Portuguese [POR] Quechua Rhaeto-Romance Romanian [RUM] Russian [RUS]
S Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish [SPA] Sundanese Swahili Swedish [SWE]
T Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish [TUR] Turkmen Twi
U-Z Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu
Code 5964 5961 5960 6047 6051 6061
6149 6164 6159 6247 6265 5247 6258 6266 6367 6459 6461 6467
6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568
6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669
6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267
Note:
· If you choose a language that has a 3-letter abbreviation, the code will be displayed every time you change the audio or subtitle language setting above. If you choose any other language, `---' will be displayed instead. (3-letter abbreviation is written in bracket.)
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
TROUBLESHOOTING
5 FAQ
Question
My remote control does not work. What should I do?
How come the Initial setup appears every time I turn on this unit?
Why I cannot watch some TV programs?
How come there is no image from the connected external devices? Whenever I entered channel number, it changes automatically.
My disc cannot be played back. Is there any way I can play my disc?
Why are captions not displayed entirely? Or, captions are delayed behind the dialogue. How can I set the clock ?
Answer
· Check the antenna or cable connection to the main unit. · Check the batteries of the remote control. · Check if there is an obstacle between the infrared sensor window and the
remote control. · Test the signal output. If OK, then possible infrared sensor trouble.
(Refer to "IR Signal Check" on page 52.) · Aim the remote control directly at the infrared sensor window on the
front of the unit. · Reduce the distance to the unit. · Re-insert the batteries with their polarities (+/ signs) as indicated. · When there is an infrared-equipped device such as PC near this unit, it
may interrupt the remote control signal of this unit. · Move the infrared-equipped device away from this unit, change the angle
of the infrared sensor or turn off the infrared communication function.
· Connect the RF coaxial cable to the unit directly and run the initial setup. · Make sure to complete the channel scan before turning off the unit.
· Make sure autoscan has been completed. (Refer to "Autoscan" on page 20.)
· Autoscan must be completed when you set up the unit for the first time or move it to a location where previously unavailable channels are broadcast.
· The selected channel may not be broadcasting. · When autoscan is interrupted and not completed,
some channels will not be received. Make sure to complete. (Refer to "Autoscan" on page 20.) · The selected channel cannot be viewed by the "Child Lock" setting. (Refer to ``Child Lock" on page 28.) · The unit requires some kind of antenna input. An indoor antenna (VHF / UHF), an external antenna (VHF /UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.
· Check if the right input mode is selected by pressing [INPUT SELECT] or using [CHANNEL - / +]. (Refer to "Switching Each Input Mode" on page 17.)
· Check the antenna or cable connection to the unit. · When using the Composite Video Connection check that the Green
(Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the unit.
· Many digital channels have alternate channel numbers. The unit changes the numbers automatically to the ones signifying the broadcasting stations. These are the numbers used for analog broadcasts.
· Clean the disc. · Ensure the disc is correctly inserted. · Check if the disc is defective by trying another disc. · Cancel the parental lock or change the control level. · Insert a correct disc that plays back on this unit. · Handle a disc with special care so that it does not have fingerprints,
scratches or dusts on its surface.
· Captions that are delayed a few seconds behind the actual dialogue are common for live broadcasts. Most captioning production companies can display a dialogue to maximum of 220 words per minute. If a dialogue exceeds that rate, selective editing is used to insure that the captions remain up-to date with the current TV screen dialogue.
· There is no clock function on this unit.
49
EN
TROUBLESHOOTING
5 Troubleshooting Guide
If the unit does not perform properly when operated as instructed in this manual, check the following chart and all connections once before calling for service.
Symptom No power
Remedy
· Make sure the AC power cord is plugged in. · Make sure that the AC outlet supplies the proper voltage, plug another electrical
appliance into the AC outlet. · If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit
to reset itself.
Control button does not work.
· Press only one button at a time. Do NOT press more than one buttons at the same time.
Power is ON but no screen image.
· Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.
· Check whether all the cables to the unit are connected to the correct output jack of your device like BD/DVD recorder.
· Make sure that the selected input mode is connected to the working input jack. · Check if your computer is NOT in sleep mode when the input mode of this unit is
in PC mode. Tap any key on the keyboard to wake up your computer.
No picture or sound
T V
No color
· Check if the power is on. · Check if the right input mode is selected. · Check whether all the cables to the unit are connected to the correct output jack
of your device like BD/DVD recorder. · View other TV channels. The problem might be limited to the broadcasting station. · Turn off the unit and wait for about 1 minute, then turn on the unit again. · Check whether the connection of the antenna, cable receiver or satellite box is
connected correctly. · Make sure that the selected input mode is connected to the working input jack. · Check if your computer is NOT in sleep mode when the input mode of this unit is
in PC mode. Tap any key on the keyboard to wake up your computer. · Make sure that the sound is not muted. Press [MUTE] so that the volume bar and
current volume level will appear on the TV screen. · Make sure that the volume is NOT set to "0" or "Mute". If so, use [VOLUME - / +] to
adjust the desired volume.
· View other TV channels. The problem might be limited to the broadcasting station. · Adjust "Color" in the main menu.
Adjusted ``PICTURE" or ``SOUND" · You must set "Home" in "Location" (Refer to page 33).
is not effective every time turn Otherwise, the settings you adjusted will not be memorized after you turn off the
on the unit.
unit.
Sound OK, picture poor
· Electrical interference from nearby appliances may affect picture quality. · Adjust "Contrast" and "Brightness" in the main menu. · View other TV channels. The problem might be limited to the broadcasting station. · For the best picture quality, watch "high definition" wide screen programs.
If the HD content is not available, watch "standard definition" programs instead.
Picture OK, sound poor
· View other TV channels. The problem might be limited to the broadcasting station. · Check if the audio cable is connected in correctly .
You see a distorted picture or hear an unusual sound.
· You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights.
· Try moving the unit to another location to see if this is the cause of the problem.
Ghosts, lines or streaks in picture
· Electrical interference from nearby appliances may affect picture quality. · View other TV channels. The problem might be limited to the broadcasting station.
You see "noise" or "trash" on the screen.
· When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will be increased to match the capabilities of the display of the unit. This may cause noise or trash.
Different color marks on the TV screen
· View other TV channels. The problem might be limited to the broadcasting station.
50
EN
English
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
Symptom
Remedy
You switch to a different input and the volume.
· This unit will memorize the volume level from the last time you adjusted it. · If the volume of the sound from another device is higher or lower, then the
loudness will change.
You switch to a different input · This unit will memorize the viewing mode from the last time you used the
and the screen size changes.
particular input modes.
The display image does not cover the entire screen.
T Captions are displayed as a
V white box. No caption is displayed in the Closed Caption-supported program.
· If you are using the unit as a PC monitor, make sure that "Horizontal Position" and "Vertical Position" in "PC Settings" are set correctly.
· If you are watching TV or using the video, S-video, component video or HDMI with 480i input, press [SCREEN MODE] repeatedly to switch various screen modes.
· Interference from buildings or weather conditions may cause captioning to be incomplete.
· Broadcasting station may shorten the program to insert advertisement. The closed caption decoder cannot read the information of the shortened program.
No caption is displayed when playing back a disc or a cassette tape containing captions.
· The disc or cassette tape may be illegally copied, or the caption signal might not have been read during copying.
Black box is displayed on the TV screen.
· The text mode is selected for caption. Select "CC1", "CC2", "CC3", "CC4" or "Off".
Completely distorted picture or black/white picture with DVD.
· Make sure the disc is compatible with the unit.
Picture freezes momentarily during playback.
· Check the disc for finger prints/scratches and clean with a soft cloth wiping from center to edge.
Disc cannot be played. D
· Clean the disc. · Ensure the disc is correctly inserted. · Check if the disc is defective by trying another disc. · Cancel the parental lock or change the control level. · Insert a correct disc that plays on this unit. · Handle a disc with special care so that it does not have fingerprints, scratches, or
dusts on its surface.
V Buttons do not work or the unit · To completely reset the unit, unplug the AC power cord from the power outlet for
stops responding.
5-10 seconds.
D The unit does not respond to some operating commands during playback.
· Operations may not be permitted by the disc. Refer to the instructions of the disc.
Angle does not switch.
· The angle cannot be switched for DVD which do not contain multiple angles. In some cases multiple angles are only recorded for specific scenes.
Playback does not start when the title is selected.
· Check the "PARENTAL" setting.
The password for rating level has been forgotten.
· Enter the default password "4737", then your forgotten password will be cleared.
Note:
· The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red. This is not to be considered a defect in the LCD screen.
· Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on correct operations.
· Some functions are prohibited on some discs.
51
EN
INFORMATION
5 Glossary
ATSC
Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards.
Aspect Ratio
The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as its height).
CEC (Consumer Electronics Control)
This allows you to operate the linked functions between our brand devices with CEC feature and this unit.
Component Video
This is a video signal format that conveys each of 3 principal colors of light (red, blue and green) through different signal lines. This allows the viewers to experience picture colors as original as it is. There are several signal formats, including Y / Pb / Pr and Y / Cb / Cr.
Dolby Digital
The system developed by Dolby Laboratories to compress digital sound. It offers stereo sound (2ch) or multi-channel audio.
HDMI (High-Definition Multimedia Interface)
Interface that supports all uncompressed, digital audio/video formats including set-top box, BD/DVD recorder or digital television, over a single cable.
HDTV (High Definition TV)
Ultimate digital format that produces high resolution and high picture quality.
NTSC
Acronym that stands for National Television Systems Committee and the name of the current analog broadcasting standards. Off the air NTSC signals will no longer be sent by broadcasting stations after Feb 17, 2009.
Password / PIN Code
A stored 4-digit number that allows access to parental control features.
Region Code
Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions).
SAP (Secondary Audio Program)
Second-audio channel delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting.
SDTV (Standard Definition TV)
Standard digital format that is similar to the NTSC picture quality.
S-video
Offers higher quality images by delivering each signal, color (c) and luminance (y) independently of each other through a separate cable.
5 Maintenance
Cabinet Cleaning
· Wipe the front panel and other exterior surfaces of the unit with a soft cloth immersed in lukewarm water and wrung dry.
· Never use a solvent or alcohol. Do not spray insecticide liquid near the unit. Such chemicals may cause damage and discoloration to the exposed surfaces.
Panel Cleaning
Wipe the panel of the unit with a soft cloth. Before cleaning the panel, disconnect the AC power cord.
Disc Handling
Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
Servicing
Should your unit become inoperative, do not try to correct the problem yourself. There are no user serviceable parts inside. Turn off the unit, unplug the AC power cord and call our toll free customer support line found on the cover of this manual to locate an authorized service center.
If the Laser Optical Pickup Unit is Dirty
If the unit still does not perform properly when it is operated, while referring to the relevant sections and to "Troubleshooting Guide" in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
IR Signal Check
If the remote control is not working properly, you can use a digital camera (including a cellular phone with built-in camera) to see if it is sending out an infrared signal.
· Always store the disc in its protective case when it is not used.
· To clean-off, use a soft cloth. · Do not use a hard cloth since this will mar the disc. · Wipe the disc in a straight line form center to edge. · Never wipe with a circular motion.
· With a digital camera (including built-in cell phone cameras): Point the Digital Camera towards the remote control infrared diode at the front of the remote control. Press any button on the remote control and look through the camera display. If the infrared pulsating light appears through the camera, the remote control is sending out an IR signal.
· Do not use detergent or abrasive cleaning agents.
52
EN
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION
English
5 Cable Channel Designations
If you subscribe to cable TV, the channels are displayed as 1-135. Cable companies often designate channels with letters or letter-number combinations. Please check with your local cable company. The following is a chart of common cable channel designations.
CATV channel 5A
2
3
4
5
6
7
8
9 10 11 12 13 A
B
C
D
E
F
G
H
TV Display
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18 19 20 21
CATV channel I
J
K L M N O P Q R S T U V W W+1 W+2 W+3 W+4 W+5 W+6
TV Display 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42
CATV channel W+7 W+8 W+9 W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24 W+25 W+26 W+27
TV Display 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
CATV channel W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39 W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48
TV Display 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
CATV channel W+49 W+50 W+51 W+52 W+53 W+54 W+55 W+56 W+57 W+58 A-5 A-4 A-3 A-2 A-1 W+59 W+60 W+61 W+62 W+63 W+64
TV Display 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105
CATV channel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79 W+80 W+81 W+82 W+83 W+84 W+85 TV Display 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126
CATV channel W+86 W+87 W+88 W+89 W+90 W+91 W+92 W+93 W+94
TV Display 127 128 129 130 131 132 133 134 135
5 General Specifications
TV
TV format:
ATSC / NTSC-M TV standard
Closed caption system:
§15.122/FCC (digital CC)
§15.119/FCC (analog CC)
Channel coverage (ATSC/NTSC):
Terrestrial
VHF: 2~13 UHF: 14~69
CATV
2~13, A~W,
W+1~W+94 (analog W+1~W+84),
A-5~A-1, 5A
Tuning system:
Channel frequency synthesized tuning system
Channel access: Direct access keyboard,
Programmable scan, and up/down
DVD
Discs (playback compatibility):
DVD-video, DVD-RW/-R,
audio CD, CD-RW/-R
Frequency response:
DVD (linear sound): 20 Hz to 20 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
CD:
20 Hz to 20 kHz
Signal-to-noise ratio (S/N ratio):
CD:
90 dB (JEITA)
Total distortion factor:
DVD:
1 KHz 0.007% (JEITA)
CD:
1 KHz 0.007% (JEITA)
5 Electrical Specification
Sound Output:
1W, 16 x 2
5 Other Specifications
Terminals:
Antenna input: VHF/UHF/CATV
75 unbalanced (F-type)
Audio input: RCA jack (L/R) x 6
500mV rms
Video input: RCA jack x 1
1V p-p (75)
S-video input: Mini DIN 4-pin jack x 1
Y: 1V p-p (75)
C: 286mV p-p (75)
Component video input:
RCA jack x 3
Y: 1V p-p (75)
Pb/Cb:700mV p-p (75)
Pr/Cr: 700mV p-p (75)
HDMI input: HDMI 19pin x 2
PC input: D-Sub 15pin x 1 (RGB)
Mini jack ø3.5mm x 1 (audio)
Coaxial digital audio output:
RCA jack x1
500mV p-p (75)
Headphone: 1/8 inches x 1 (3.5mm)
Remote control: Digital encoded infrared light system Operating temperature:
41°F (5°C) to 104°F (40°C)
Power requirements: 120V~ AC +/- 10%, 60Hz +/- 0.5%
Power consumption (maximum):
65W
LCD:
19 inches class (18.5 inches measured diagonally)
Dimensions: <without stand> <with stand>
W: 18.8 inches (477.5mm) 18.8 inches (477.5mm)
H: 13.1 inches (330.4mm) 14.5 inches (365.8mm)
D: 5.4 inches (134.7mm) 8.3 inches (210.0mm)
Weight:
9.1 lbs. (4.1kg) 10.0 lbs. (4.5kg)
· Designs and specifications are subject to change without notice and without our legal obligation. · If there is a discrepancy between languages, the default language will be English.
53
EN
Do not attempt to service the product yourself
JVC Loves the Earth
JVC COMPANY OF AMERICA Division of JVC Americas Corp.
1700 Valley Road Wayne, New Jersey, 07470
Printed in China
A94N5UH 1EMN24939
Acrobat Distiller 8.1.0 (Windows)