Whirlpool® Top Loading Washing Machine
Control Panel and Features

Control Panel Overview

Illustration of the washing machine control panel with numbered sections.

? 1 POWER

Touch to turn on/off or to stop/cancel a cycle.

? 2 WHAT TO WASH/HOW TO WASH

First select a cycle from the "WHAT to wash" category, then select the "HOW to wash" category to achieve the best combination cycle for the type of items you are washing. Refer to the "Cycle Guide" for detailed cycle information.

?️ 3 LCD TIME/STATUS DISPLAY

The display shows the estimated time required for the cycle to complete. Factors such as load size and water pressure may affect the displayed time. Tightly packed loads, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time. If a delay start is set, the display will show the adjusted delay time.

ADD GARMENT

When "Add Garment" is illuminated, you can pause the cycle, open the lid, and add items. Touch and hold the START/PAUSE button to resume the cycle.

▶️ / ⏸️ 4 START/PAUSE

Touch and hold to start the cycle. Touch during a cycle to pause it and unlock the lid. NOTE: If the machine is spinning, the lid may take longer to unlock.

⚙️ 5 CYCLE MODIFIERS

Not all modifiers are available on all cycles.

SPIN

Touch to modify the cycle's available spin speeds (Off, Medium, Fast).

TEMP

Touch to modify the cycle's available water temperatures (Tap Cold, Cold, Cool, Warm, Hot).

SOIL

Touch to modify the cycle's available soil levels. Increase the soil level for heavily soiled items and decrease it for lightly soiled items (Extra Light, Light, Normal, Heavy, Extra Heavy).

➕ 6 CYCLE OPTIONS

Not all options are available on all cycles.

REMOTE ENABLE

Touch to enable remote control via the Whirlpool® app. Follow instructions in the "Get the Whirlpool® app and get connected" section for details. Opening the lid cancels "Remote Enable".

LOAD & GO™ Bulk Dispenser

The LOAD & GO™ dispenser holds 1L of detergent and automatically determines the best time and amount to add detergent to the load. Refer to "Using the Dispensers" for more information.

FABRIC SOFTENER

Touch "Fabric Softener" to indicate that fabric softener has been added to the appropriate dispenser.

DEEP WATER

Touch "Deep Water" to add more water to the wash load, selecting from the cycle's auto-sensed level (Auto, Medium, High, Max Fill). NOTE: Expect longer cycle times due to extended fill times when using this option.

DELAY START

Touch to delay the start of the wash cycle for up to 12 hours.

PRESOAK

Touch to add a presoak period to any cycle to help loosen tough stains. The washer will fill, pause to soak, and then begin the selected cycle (options: 15, 30, 60, or 120 minutes).

EXTRA RINSE

Touch to automatically add a second rinse, available on most cycles.

CYCLE SIGNAL

Touch to turn the end-of-cycle signal on/off and adjust the tone volume when a button is touched.

MORE OPTIONS

Includes options like Drain & Spin, Rinse & Spin, Clean Washer with affresh®, and Favorite Cycle.

Get the Whirlpool® App and Get Connected

Download the Whirlpool® app on your mobile device for subscription and connectivity instructions, terms of use, and privacy policy at www.whirlpool.com/connect or www.whirlpool.ca/connect (for Canada). Once installed, launch the app and follow the steps to subscribe and create your user account. For problems or questions, call Whirlpool® Connected Appliances at 1-866-333-4591.

Using Your Washer

⚠️ WARNING: Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

1. 1 SORT & LOAD LAUNDRY

   Refer to the "Loading Recommendation" section for guidance.

2. 2 ADD HE DETERGENT & LAUNDRY PRODUCTS TO DISPENSERS*

   Illustration of the bulk dispenser drawer.

3. 3 TOUCH POWER TO TURN ON THE WASHER

   Illustration of the power button.

4. 4 SELECT THE DESIRED CYCLE FOR YOUR LOAD*

   Illustration of the "WHAT to wash" cycle selection buttons.

5. 5 ADJUST CYCLE SETTINGS, IF DESIRED*

   Illustration of "Temp" and "Soil" setting buttons.

6. 6 SELECT ADDITIONAL OPTIONS*

   Illustration of "Extra Rinse" and "More Options" buttons.

7. 7 TOUCH AND HOLD START/PAUSE TO BEGIN CYCLE

   Illustration of the START/PAUSE button.

*NOTE: Not all cycles, settings, or options are available with all models.

Loading Recommendation

For best performance, it is recommended to load items by dropping them in loose heaps evenly around the washplate and agitator. Do not lay items length-wise around the washplate or agitator.

Illustration showing how to load laundry items loosely around the washplate and agitator.

RINSING BEFORE RUNNING A WASH CYCLE

Water Faucet Operation: Press the faucet button once to turn on and press again to turn off. The faucet will automatically shut off after 10 minutes or when the maximum water level is reached. Water will automatically drain if the water level becomes too high or if the lid is left open for 10 minutes. Touch the Temp button when the faucet is active to select water temperature, or touch the LOAD & GO™ button to manually dispense a dose of detergent.

Illustration of the water faucet operation.

Fabric Brush (brosse à tissu)

Follow these steps to use the fabric brush dispenser:

1. Turn the brush from the body to open.
2. Add liquid laundry detergent.
3. Turn to close the compartment.
4. To dispense detergent from the fabric brush, push the button.

WARNING: Do not wash water-resistant or water-repellant-type clothing. Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance condition that could result in physical injury, property damage, and/or appliance damage.

Illustration showing the steps for using the fabric brush dispenser.

More Water When You Want It

The washer is designed to provide a thorough cleaning using less water for energy and resource conservation. The washer automatically adjusts the water level to the optimal amount for a High Efficiency wash based on the detected load size.

Illustration showing the different water level indicators: Max Fill, High, Medium, Auto.

Auto Sensing & Deep Water Wash

Touch "Deep Water" to add more water to the wash load. There are four levels of Deep Water: "Auto", "Medium", "High", and "Max Fill". Not all levels are available on all cycles.

As the washer dampens and moves the load, the items will settle in the basket. This is normal and does not indicate that more items should be added.

IMPORTANT: You will not see a full basket of water as with older, less efficient washing machines. It is normal for some of the load to be above the water line.

USING THE DISPENSER

The LOAD & GO™ feature is enabled by default for each cycle unless disabled.

Touch the LOAD & GO™ button to view detergent dispensing options.

Press and hold the LOAD & GO™ button on the control panel to select a detergent concentration between 2X and 10X. Hold for 3 seconds.

Pull the drawer completely out for easy refilling.

Illustration of the dispenser drawer and control panel buttons related to LOAD & GO™.

2-IN-1 REMOVABLE AGITATOR

The agitator can be removed for added space or a gentler, more thorough clean, especially for bulky items or delicates.

Illustrations showing the Agitator Mode (with handle squeezed, rotated counter-clockwise, pulled up) and Impeller Mode.

USING THE REMOVABLE AGITATOR

To remove: Squeeze the handle, rotate counter-clockwise, and pull up. To re-install: Push down and rotate clockwise. The agitator should lock into place.

CYCLE GUIDE

Your Whirlpool® washer features a unique interface to help you select the best cycle for your load. The "WHAT to wash" and "HOW to wash" layout guides you to the optimal cycle in two easy steps:

1. First, determine the items in the load you need to wash. Use this to guide your "WHAT to wash" selection.
2. Next, determine how you want the washer to clean these items and select the appropriate "HOW to wash" selection. See the chart below for more details.

For best fabric care, choose the cycle that best fits the load being washed.

Key: R - Recommended Cycle, a - Alternate Cycle, Blank - Cycle is available but not optimal

*Use this cycle to eliminate 99.9% of bacteria when used in conjunction with Oxi additives. Preset cycle settings must be used to achieve proper sanitization. Be sure to add an Oxi product to the basket before starting cycle.

NOTE: The Normal cycle is recommended for washing normally soiled cotton or linen clothes. This clothes washer's government energy certifications were based on the Normal cycle with all wash temperature selections and water fill levels offered in the cycle. It was tested as a User Adjustable Automatic Water Fill Control System clothes washer with the Agitator installed. The settings as shipped are Regular + Normal cycle, Warm Wash Temp and Auto Water level, Deep Water off.

WASHER ICONS

NOTE: Not all features and options are available on all models.

Assistance or Service and Additional Information

For detailed installation instructions, maintenance information, winter storage, and transportation, please consult the INSTALLATION AND CARE INSTRUCTIONS MANUAL included with your machine.

For detailed product dimensions, please see the DIMENSION GUIDE available at www.whirlpool.com/owners or www.whirlpool.ca/owners (in Canada).

For information on the following items, visit www.whirlpool.com/owners or www.whirlpool.ca/owners (in Canada). This may save you the cost of a service call.

• REGISTER PRODUCT
• SCHEDULE SERVICE
• HOW TO'S & FAQ
• MANUALS & DOWNLOADS
• ADD SERVICE PLAN
• PARTS
• ACCESSORIES

Icons representing: Register Product, Schedule Service, How To's & FAQ, Manuals & Downloads, Add Service Plan, Parts, Accessories.

To speak with a customer service representative or if you have additional questions, call toll-free at 1-866-698-2538 or in Canada call 1-800-807-6777.

You can write with any questions or concerns at:

Whirlpool Brand Appliances
Customer eXperience Center
533 Benson Road
Benton Harbor, MI 49022-2692

Whirlpool Brand Appliances
Customer eXperience Center
Unit 200-6750 Century Ave
Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.