Instruction Manual for CREALITY models including: CR-10, Max 3D Printer, CR-10 Max 3D Printer, 3D Printer, Printer
This User Manual is prepared for standard CR-10 Max. Please plug the power cord into a three-hole power jack. Detailed instructions for use are available in the TF card.
CR-10 Max 3D Printer User Manual This User Manual is prepared for standard CR-10 Max. Please plug the power cord into a three-hole power jack. Detailed instructions for use are available in the TF card. V.1.0 CONTENTS Dear Consumers, Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our teams will always be ready to render you the best services. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer. For a better experience in using our product, you can also learn how to use the Printer in the following ways: View the accompanied instructions and videos in the TF card. Visit our official website www.cxsw3d.com to find relevant software/hardware information, contact details and operation and maintenance instructions. Notes 1. Do not use the printer in any way other than described herein in order to avoid personal injury or property damage. 2. Do not place the printer near any heat source or flammable or explosive object. We suggest placing it in a wellventilated, shady and low-dust environment. 3. Do not expose the printer to a vibrant or any unstable environment, as this may cause poor print quality. 4. We suggest using filaments recommended by manufacturer to avoid the blocking of extrusion structure and the damage of machine. 5. Do not use any other power cord except the one supplied. Always use a grounded three-prong power outlet. 6. Do not touch the nozzle or hotbed during printing to avoid burns or personal injury. 7. Do not wear gloves or loose clothing when operating the printer. Such cloths may become tangled in the printers moving parts to lead to burns, possible bodily injury or printer damage. 8. When cleaning debris from the printer hotbed, always use the provided tools. Do not touch the nozzle directly when heated. This can cause personal injury. 9. Clean the printer frequently. Always turn the power off when cleaning, and wipe with a dry cloth to remove dust, adhered printing plastics or any other material off the frame, guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface before every print for consistent results. 10. Children under 10 years of age should not use the printer without supervision. 11. This machine is equipped with a security protection mechanism. Do not manually move the nozzle and printing platform mechanism manually while booting up, otherwise the device will automatically power off for safety! Introduction..................1 General List..................2 Device Installation........3 Cable Connection.........4 Screen Information.......5 Loading Filament..........6 Bed Leveling.................7 Software Installation....9 First Printing.................10 Circuit Wiring...............11 1. Introduction 1 8 2 3 4 5 6 7 9 10 1. Nozzle kit & auto leveling 2. X-axis limit switch 3. Printing platform 4. Touch screen 5. TF card slot & USB port 6. Power switch 7. Power socket 8. Filament holder 9. Y-axis limit switch 10. Z-axis motor Parameters Model Molding Size Molding Tech. Nozzle Number CR-10 Max 450 x 450 x 470mm FDM 1 Slice Thickness 0.1mm-0.4mm 13 Nozzle Diameter Precision Fliament 14 File Format Working Mode 0.4mm 0.8mm ±0.1mm 1.75mm PLA STL/OBJ/AMF Online or TF card offline 15 Slice Software Creality Slicer/Cura/ Repetier-Host/Simplify3D Power Supply Motherboard 75W, 24V, input: 100-240V AC, Spec. output: 24V Hotbed 750W, 24V, input: 100-240V AC, output 24V Machine Power Hotbed Power Hotbed Temp. Nozzle Temp. 750W 700W 100 2 5 0 11 12 11. Coupling 12. XL bed-leveling nut 13. Extruder (E) motor 14. Filament detector 15. X-axis motor Resume Print Filament Detector Dual Z-Axis Auto Leveing Language Selection Operating System Yes Yes Yes Yes EN/CN Windows XP/Vista//7/8/10 MAC/Linux 1 2. General List Tool Box Base Frame Printing Platform Gantry Frame Support Rod Tool List No. Image Name Qty 1 Wrench & Screw Driver 1 Set 2 TF Card & Reader 1 Set 3 Spatula 1 No. Image Name Qty 7 Filament Holder 1 8 Filament Holder Tube with Nuts 1 9 Power Cord 1 Filament (1kg) No. Image Name Qty 13 Spacer 1 14 Feeler Gauge 1 15 Spare Parts 1 Set 4 Pliers 1 10 USB Cable 1 16 5 Nozzle Cleaner 1 11 M4X20 Hexagon Socket Head Cap Screws 10 17 6 Cable Ties 2 12 T-type Fixed block 2 2 M5x45 Sems Screw 4 Sets M4X8 Head Cap Screw 2 Sets and M4 T-Nut Pull rod joint M5 T-nut Eye bolt M6 x 35 M6 Nut Pull rod M6X40 Screw rod Pull rod details No. Name Qty 1 Pull rod 4pcs 2 L-type pull rod connecting fittings 2pcs 3 Eye bolt M6 x 35 4pcs 4 M6 nut 4pcs 5 Set screw M6 x 40 2pcs 6 M5 x 12 Hexagon socket button head screw 8pcs 7 M5 T-nut 4pcs Pull rod M6 Nut Eye bolt M6 x 35 3 3. Device installation M4X20 Head Cap Screw 4pcs M5X45 4pcs 4. Support Rod 1. Printing Platform Installation 2. Gantry Frame Installation Installation Support Rod 4pcs M6 x 40 Screw rod 2pcs Eye Bolt M6 x 26 2pcs M6 Nut 4pcs M5 x 12 Screw 8pcs M5 T-Nut 4pcs M4 x 20 6pcs T block 2pcs 3. Gantry Frame Fixation 4 M4 x 8 Head cap screw 4pcs M4 T-Nut 2pcs 5. Filament Holder Installation 4. Cable Connection Z2 *Plug the power cord into a threehole power jack. Ribbon Cable Z1 5 5. Screen Information Select "Print" 6 Automatic Manual Cooling Fan Leveling Refuel Moving Motor Print info Language Set temperature of hotbed Current temperature of hotbed Set temperature of nozzle Current temperature of nozzle Main Menu Print Temp Setting Sub Menu TF card Automatic Manual Cooling Fan Leveling Refuel Moving Motor off Language Printer info Screen Information Explanation Adjust Stop Pause/Continue Print speed Nozzle temp. Hot-bed temp. Fan Temperature up/Stop Continue/Stop PLA \ABS195°\240° Nozzle preheat Hot-bed preheat Yes\No On\Off Z-axis: Z home, +0.1mm, -0.1mm AUX leveling Please click numbers (~) to assisted leveling...... AUTO leveling (switch) Platform measurement (measurement parameters) Withdraw Feed X-axis Y-axis Z-axis Z home Yes \No English\Chinese Device model, firmware version, printing size, official website 6. Loading Filament Preheat Method 1. Feeding Method 2. Go through the filament detector to press and hold the extruder spring. Insert the filament to the position of nozzle through the hole on the extruder. Continue feeding until you see filament extrude from the nozzle. Replacing Filament During Printing: 1. Cut the filament near the extruder and feed new filament slowly until new filament is fed into the feeding pipe. (Or) 200 2. Preheat the nozzle and replace the used filament with new filament. 7 7. Bed Leveling 1. Tighten four leveling nuts at the bottom of the platform before initial leveling. 2. Select "Settings" "Leveling Mode" "Assisted Leveling", click number . 5 4 1 2 3 3. Adjust the platform height by turning the knob underneath. Adjust the printing platform and nozzle to enable the two to just fit each other perfectly with a gap of 0.05mm. Use a piece of A4 paper to assist with the leveling to make sure that the nozzle just scratches on this A4 paper. 4. Adjust all leveling nuts with four corners. 5. Click number to test if the platform gap is proper. 6. Repeat above steps once or twice if necessary. 8 The nozzle is too far away from the platform, so the filament fails to adhere to the platform. Filament is extruded evenly to adhere to the platform. The nozzle is too close to the platform, and the filament is not extruded insufficiently, and even the platform is scratched. Automatic leveling If you need to do automatic leveling , you can change to it in the following interface: Detailed instructions for use are available in the TF card! 9 8. Software Installation 1. Double click to install the software 2. Double click to open the software 10 3. Select language Next Select your machine Next Finish Please refer to the Slice Software User Manual in the TF card for details of software use! 9. First Printing 1. Slicing Open the software Load Select the file Wait for slicing to finish ,and save the gcode file to TF card. * File name must be English or number. Don't use Chinese or special symbols 2. Printing Insert the TF card Print Select Model Print 11 Tips 1. Terms about after-sales service are available in the after-sales service card. 2. Slight scratch of profile and slight tilt of platform is normal if printing can still be done smoothly. 3. Users must abide by laws and regulations in the location of machine and corresponding countries/regions and adhere to work ethics and are strictly prohibited from using our 3D printers to print any product or object that violate laws and regulations in the location of machine and corresponding countries /regions to make the most of 3D printers, promote the harmonious growth of market economy, consciously enhance industry self-discipline, establish a positive image of 3D printers, ensure well-organized, legitimate and healthy activities about product certification and quality management system certification, highly mitigate risks from the use of 3D printers and avoid related responsibilities. The revision date: July 10 ,2019 SHENZHEN CREALITY 3D TECHNOLOGY CO.,LTD. 11F & Room 1201,Block 3,JinChengYuan,Tongsheng Community,Dal ang,Longhua District,Shenzhen,China,518109 Official Website: www.creality3d.cn Tel: +86 0755-85234565 E-mail: info@creality3d.cn cs@creality3d.cnAdobe Illustrator CC 22.1 (Windows) iLovePDF