Manuals & Software | AUTOOL
X90OBD manual - AUTOOL
AUTOOL X90 Smart OBD Slope Meter
User Manual
M
www.autooltech.com
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in different countries, the
trademark is
. With regard to the other trademark, service logo, domain
name, icon and company name mentioned in this manual, they shall all belong to
AUTOOL and its other affiliated company, in other countries without the registration yet
of these trademark, service logo, domain name, icon and company name of AUTOOL,
here we announce they are owned by AUTOOL. Any company or person shall not use
the trademark, service logo, domain name, icon and company name of AUTOOL before
getting approved by AUTOOL with written certificates. Please visit our website
www.autooltech.com or email aftersale@autooltech.com to contact us.
Caution Please follow the operation instructions and use the parts recommended by manufacturer. Non- technical person shall not change, disassemble or repair the product, otherwise all losses caused by this shall be bared by the user himself. Please do not scratch, bend, twist or stretch the wires. Do not place the wires in high temperature. Do not press hard or decompose the on-board charging adapter. Please do not place nails, pins, and other small debris on the charging port, in order to avoid damaging the charging connector. Do not place the product in unstable place such as high altitude area, slope, or shelf. This product is powered by electricity and should not be used as a toy for children. Do not immerse the product in water or other liquids, in order to avoid short circuit. Please try to use the power supply and power cord supplied by manufacturer as standard. Please do not expose this product to strong light or high temperature when it's not at use.
1. Product Introduction Autool X90 OBD smart slope meter extends the concept of combining HUD automobile head-up display function with on-board slope meter, which greatly improves the product's safety escort level for users, and is favored by a large number of off-road enthusiasts. Autool X90 OBD smart slope meter reads data through OBD interface of automobile connected by data line. It supports nine major protocols and can also support the use of some light trucks. With Autool X90 OBD smart slope meter, you can not only drive without bowing your head and pay attention to the vehicle dynamics at any time, but also see the roll angle and elevation angle of the vehicle. TheX90 OBD smart slope meter uses LCD color screen display. The effect is dazzling and clear, so that the vision can be seen at a
glance. The functions of OBD smart escort include (OBD speed, speed, clearing fault codes, water temperature, voltage, roll angle of the vehicle, elevation angle of the vehicle, etc.). Functions)
2. Product Features Suitable for domestic car system, Asian car system, American car system, European car system, and some minivans. It has the function of clearing the fault code of automobile. Free switching between degrees Fahrenheit and degrees Celsius (tank temperature display) Free switching between British and metric units (speed display) Gui Temple site Support for the nine major OBD agreements Automatically monitor the driving condition of the vehicle. The light intensity induced by the light source sensor is used to adjust the brightness of the screen. The free rotation is used, and its sensitivity is high. Using color high definition liquid crystal screen display, high resolution Carbon fiber appearance fuselage design. Start with the car, stop automatic dormancy function. Parameter display: Vehicle roll angle display Vehicle elevation display OBD Speed Display OBD Speed Meter Display OBD Speed Digital Display Temperature Display of Water Tank Clearing Fault Code Battery Voltage Display
Alarm functions: Roll angle danger alarm Elevation angle hazard alarm Over-speed alarm Fatigue driving alarm (alarm will be given if driving for 4 hours continuously) Battery Abnormal Alarm Alarm for high water temperature Vehicle Fault Code Alarm
3. Output Parameters
Power:
DC 10V ~ 30V
Working Temperature:
-40 ~ 80
Depression& Elevation Angle: -40° ~ 40°
Roll Angle:
-40° ~ 40°
OBD Speed:
Synchronous automobile data
OBD Revolution:
Synchronized Vehicle Data
Voltage Accuracy:
± 0.5V
Speed Accuracy:
0.05Km/h
Water Temperature accuracy: ± 0.5
Fault Code:
Synchronized Vehicle Data
Support Agreements: Supports 9 major protocols
Shell Material:
ABS+PC High Temperature Resistant Materials
Product Size:
70*59*59 mm/ 2.8*2.3*2.3 inch
Weight:
203g
4. Introduction of Main Unit
1-Display Interface. 2-" M " menu function key. 3-Switch key. 4- Photoelectric sensor (automatic adjustment of display brightness). 5- Upgrade dedicated USB interface. 6-DC12V Power Supply Interface (only available for GPS version ). 7-RG45 power supply and OBD signal receiving port. 8- Carbon fiber process shell.
5. Introduction of Display Interface and Function
A- Roll angle alarm icon, when the roll angle of the car reaches 30 degrees, this icon will light up and give an alarm sound.
B- Roll angle indication area, real-time measurement of vehicle roll angle, using free rotation, left and right angles of 40 degrees.
C - Digital speed display area, showing the current speed (motion speed).
D- Engine speed dashboard display, indicating the current speed of the engine (dashboard speed).
E-Satellite Vehicle Speed Display Area, which shows the current speed of the vehicle as it travels.
F- Water tank temperature display area, real-time display of water temperature.
G- Elevation indicator area, real-time measurement of vehicle elevation angle, using free rotation, front and rear angles of 40 degrees.
H- Automobile battery voltage monitoring display area, showing the current battery voltage value. I - Over speed alarm. When the car arrives at 120KM/H, this icon will light up and make an alarm sound. (You can also turn off the alarm sound)
J - Fatigue driving alarm. When the car runs continuously for 4 hours, this icon will light up and give an alarm sound.
Sound Close/Open icon. When the sound is turned on, the icon is lit, but not
when it is turned off. (You can open/close by pressing the right button for a long
time.
AUTOOL BT 760
6. Introduction of Key Function
1) "M" function key * Short press "M" function key, temperature unit / switching * Long press "M" function key 3S, speed unit KM/H and M PH switch. * Long press "M" function key 5S, turn on/off sound
2) Right-click * Press the "right button" button to reset the roll angle and elevation angle. * Press the right button for 5 seconds to clear the car trouble code.
7. Installation Steps 1) Park the car on the horizontal road, paste the back glue on the product, fix it anywhere convenient to observe inside the car, and adjust it manually to the level. 2) Connect the OBD data line to the OBD interface of the automobile (as shown in the figure below). The OBD smart convoy will start until the data are displayed properly. 8. Warranty There are 3 years' warranty for AUTOOL product main unit and 1 year warranty for the accessories since the day the customers have received the product parcel.
Warranty Access: 1.Repairing or replacement the equipment will be done according to the specific fault conditions. 2.We guarantee that all replacement parts, accessories or equipment are brand new. 3.When there is a product breakdown that can not be solved within 90 days, customer should provide video and pictures as proof, we will bear the freight cost and provide customer the accessories in need to replace. After receiving the product for more than 90 days, the customer shall bear the freight cost, we will provide the accessory for free to replace.
Conditions Warranty not Covered: 1.Product is bought through non-official AUTOOL purchase channel.
2.Product failure is caused by incorrect use of the product, use for other wrong purpose or human factors.
Disclaimer: The AUTOOL Technology Co, Ltd. reserves the right to change product designs and specifications without prior notice. The physical appearance and color may differ from those shown in the instruction manual. Please refer to the actual product. If you have any questions, please contact the dealer or the Autool service center. The company have the final explanation right of product and shall not bear any consequences due to misunderstanding.
www.autooltech.comaftersale@autooltech.com
X90OBD
X90OBDOBD9
80%OBD OBD LCD X90OBDOBD
; ; ; ; OBD; ; ; ; ; ;
OBD OBD OBD
4
OBD: OBD: : : : : : : : :
DC 10V ~ 30V -40 ~ +80 -40°~ +40° -40°~ +40° + - 0.5V 0.05Km/h + - 0.5° 9 ABS+PC 70*59*59mm 203g
1- 2-"M" 3- 4- 5-USB 6-DC 12VGPS 7-RG45OBD 8-
A-30° B-40° C- D- E- F- G-40° H- I-120KM/H J- 4
K-// L- M- N- O-MPH/KMHMPHKM/H3
* "M"3S,KM/HMPH * "M"5S,/
2 * "" * ""5
1. , 2.OBDOBDOBD
AUTOOL BT 760
Th
AUTOOL 31 1. 2. 3.90 90
1.AUTOOL 2.
Adobe Acrobat Pro 11.0.0 Adobe Acrobat Pro 11.0.0