Nexa WBR-01 Smart Built-in On/Off Switch

Model: WBR-01

Installation Requirements

This product must be installed by a qualified electrician.

Key Features

Control your devices with the Nexa Home app from anywhere.
Compatible with all System Nexa remote controls, sensors, and wall transmitters.
Create custom schedules and timers for automated control.
Supports voice control via Google Assistant.
Enable shared control of devices with other users via the app.

App Setup

Download and install the Nexa Home app from your device's app store (available for iOS and Android). Once the product is powered according to the wiring diagram, follow the on-screen instructions within the Nexa Home app to complete the setup.

App availability: iOS 15 or later, Android 14 or later.

Wiring Diagram Description

The device connects to the mains power supply via Live (L) and Neutral (N) terminals. The load (e.g., light or appliance) is connected to the L1 terminal. An optional external switch can be wired to control the device.

Technical Specifications

Specification	Value
Power Supply	220-240 V~50 Hz
Load Capacity	1800W Resistive Load (RL) / 200W LED
WiFi Standard	802.11 b/g/n (2412–2472 MHz), 802.11 n HT40 (2422-2462 MHz)
Max WiFi Transmit Power	9.6 dBm
BLE Frequency	2402-2480 MHz
Max BLE Transmit Power	4.37 dBm
System Nexa Frequency	433.92 MHz (Reception only)
Memory Slots	32 (System Nexa devices)
Power Consumption	< 0.5W
IP Rating	Indoor use

Support and Manuals

For a complete manual and further support, please visit nexa.se or contact support@nexa.se.