Lofree OE915 FLOW 84-Key Dual Mode Low-Profile Mechanical Keyboard
Specifications
Number of keys: 84 (Hot-swappable Supported)
Numbers of Multifunction Keys: 16
Materials: Aluminum Alloy Unibody, PBT Keycaps
Interface: Type-C
Mode: Wired/Bluetooth
Bluetooth Name: Flow84@Lofree
Dimensions: 316 mm x 126 mm x 24.5 mm
Diagram
Diagram showing the top view of the Lofree OE915 keyboard. It features 84 keys, including a standard QWERTY layout, function row (F1-F12), navigation keys, and a numeric keypad. Indicator lights are visible near the top right. A USB Type-C port is located on the left side.Diagram showing the side view of the Lofree OE915 keyboard, highlighting its low-profile design. It shows the USB Type-C port and a mode switch on the rear.Indicators
1. Battery Indicator: Charging: Indicator breathes white ?. Charged: Indicator is solid white ?. Battery below 20%: Indicator breathes red ?. Battery below 5%: Indicator flashes until off ?.
2. Caps Lock/Status Indicator (White & Blue):
- Caps Lock Indicator (White): Solid white light ⚪ indicates Caps Lock is ON. No white light indicates Caps Lock is OFF.
- Bluetooth Pairing Indicator (Blue): During Bluetooth pairing, the indicator blinks slowly ? for 1 minute. After successful pairing, the indicator stays solid blue ? for 3 seconds.
Device Switching Indicator: During device switching, the indicator flashes for 3 seconds, then stays solid for 3 seconds before returning to the previous state. During Bluetooth reconnection, the indicator blinks continuously ?. After reconnection, it stays solid for 3 seconds and then returns to the previous state.
3. Ambient Light: Controls steady, breathe, or off modes. Also switches ambient light color.
4. Mode Switch: Controls power and connection mode: OFF, ON (wired), BT (Bluetooth).
5. Type C Interface: For wired connection and charging.
Detailed Operation
Wired Connection
1. Toggle the mode switch to the 'ON' position.
Diagram illustrating the mode switch being moved from 'OFF' to 'ON'.Bluetooth Connection
1. Toggle the mode switch to the 'BT' position.
Diagram illustrating the mode switch being moved to 'BT'.2. Long press Fn + 1, Fn + 2, or Fn + 3 until the indicator blinks slowly in blue ?.
Diagram showing the Fn keys (1, 2, 3) and the indicator light blinking blue.3. On your device, find and select "Flow84@Lofree" ? from the list of paired devices. Click the 'Click' button.
Diagram showing a search icon, the text "Flow84@Lofree", and a "Click" button.4. Status Indicator: After successful pairing, the indicator stays solid for 3 seconds and then turns off.
Diagram showing '3S' and an indicator symbol.5. Press Fn + 1, Fn + 2, or Fn + 3 to switch between paired Bluetooth devices.
Diagram showing the Fn keys (1, 2, 3) and a finger pressing the Fn key in the lower right corner.Ambient Light Control
1. Press Fn + [Left Arrow Key] ⬅️ for Steady/Breathe/Off modes.
Diagram showing Fn key, left arrow key, and icons representing steady light, breathing light, and light off.2. Press Fn + [Right Arrow Key] ➡️ for Ambient Light Color Switch (RGB slider).
Diagram showing Fn key, right arrow key, and an RGB color slider.System Switch & Multifunction Keys
System Switch
Press Fn + N (in the lower right corner) to trigger the corresponding system function key for Windows/Android.
Press Fn + M (in the lower right corner) to trigger the corresponding system function key for Mac/iOS.
Multifunction Keys
Fn + F1 ... Del = Multimedia Key
Function Key Assignments
| Function Sign | Mac | Windows |
|---|---|---|
| FN+F1 ? | Screen BR- | Screen BR- |
| FN+F2 ? | Screen BR+ | Screen BR+ |
| FN+F3 ? | Multi-Screen | Multi-Screen |
| FN+F4 ? | Search | Search |
| FN+F5 ? | Backlit- | Backlit- |
| FN+F6 ? | Backlit+ | Backlit+ |
| FN+F7 ⏮️ | Prev Song | Prev Song |
| FN+F8 ⏯️ | Play/Pause | Play/Pause |
| FN+F9 ⏭️ | Next Song | Next Song |
| FN+F10 ? | Mute | Mute |
| FN+F11 ? | VOL- | VOL- |
| FN+F12 ? | VOL+ | VOL+ |
| FN+Opt/Ctrl ⚙️ | / | Menu |
| FN+Prtsc ? | Calculator | |
| FN+Ins ? | Voice Assistant | |
| FN+Del ? | Lock |
Name and Content of Hazardous Substances in Product
| Harmful Elements | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr VI) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Plastic Components | ○ | ○ | ○ | ○ | ○ | ○ |
| Circuit Board Assembly | ○ | ○ | ○ | ○ | ○ | ○ |
| Silicone Components | ○ | ○ | ○ | ○ | ○ | ○ |
| Spare Parts | ○ | ○ | ○ | ○ | ○ | ○ |
This table is prepared in accordance with the provisions of SJ/T 11364.
The classification and marking of this product was performed in accordance with the EU directive 2011/65/EU and the revised directive 2015/863/EU.
○: Indicates that the said hazardous substance contained in all the homogeneous materials for this component is below the limit requirement in GB/T 26572.
X: Indicates that this hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in GB/T 26572.
Environmental Protection Instructions
The hazardous substances contained in the electronic parts of this product will not leak or change under normal use conditions for a period of ten years. During the same period, the electronic components of this product will not cause serious environmental pollution or serious damage to human health or property while the products are being used by the consumer.
According to the Chinese electronic industry standard SJ/T 11364-2014 and related Chinese government regulations, this product and some of its internal or external components may have an environmentally friendly use period mark, depending on the component and component manufacturer. The mark lifespan on the product and its components may vary. The expiration date on the component takes precedence over any conflicted or different UFUP label on the product.
Warning
- If the battery is not replaced properly, there may be leakage or explosion and personal injury hazards. Do not use the battery when there is leakage, discoloration, deformation, or any other abnormality.
- Do not leave the battery in a discharged or unused state for a long time.
- Do not short-circuit the product.
- Battery life varies with usage. Used batteries should be disposed of in accordance with local laws or thrown away in trash cans for recycling electronic devices ♻️.
- If any liquid accidentally enters the product, please immediately disconnect the power supply and remove the product. Continue to use the product may cause fire or electric shock. Please contact the agent or the nearest customer service center for inspection and maintenance.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
