YAMIRY SMART LOCK USER MANUAL

MODEL: H1B

IMPORTANT NOTES

Install and test the lock with the door open to avoid being locked out. Please read all the instructions before contacting customer support. Please contact customer support before returning the product to the store. DO NOT install the batteries before installing the lock! Follow the instructions in sequential order! Please use AA Alkaline Battery and do not use Lithium Battery or Rechargeable Battery.

YAMIRY TERMS & POLICIES

Before using all YAMIRY products, please read all applicable terms, rules, policies, and usage provisions found at www.yamiry.com/pages/privacy. By using YAMIRY products, you agree to be bound by the YAMIRY Privacy Policy.

NEED HELP?

For technical documents and more, please visit www.yamiry.com/pages/support or email: support@yamiry.com.

1 Product Overview

The Yamiry H1B Smart Lock offers multiple ways to unlock your door, including fingerprint, keypad, card, and smartphone via the TTLock App.

2 Packing List

The package includes the following components:

3 Installation

Please scan the QR code to watch the step-by-step installation video before attempting to install your Smart lock.

3.1 Preparing Door

Check the door's dimensions:

Diagram showing door dimensions: The diagram illustrates the required measurements for the door thickness, main hole diameter, and edge hole diameter.

3.2 Adjust Latch Backset Length

Measure your door backset, then adjust to the corresponding latch length (60mm or 70mm).

Diagram showing latch adjustment: Two diagrams illustrate the latch mechanism, showing how to adjust it for 60mm and 70mm backsets.

3.3 Install Latch and Strike & Strike Box

  1. Install strike & strike box on door frame with Screw A.
  2. Install latch into door with Screw A.

Attention: Check Latch's Status

Diagram showing correct and incorrect latch installation: A checkmark indicates the correct horizontal placement of the square hole, while an 'X' indicates the incorrect inclined placement.

3.4 Adjust the Handles Direction

Confirm the opening direction of your door and adjust the handles accordingly.

Diagrams for Left-Handed and Right-Handed Doors: Visuals show the exterior and interior assemblies for both left-handed and right-handed doors, with steps for adjusting the handle direction.

Steps for Exterior Assembly:

  1. Step 1: Loosen the screw.
  2. Step 2: Adjust the door handle direction.
  3. Step 3: Tighten the screws after adjusting the handle direction and complete.

Steps for Interior Assembly:

  1. Step 1: Loosen the screw.
  2. Step 2: Adjust the door handle direction.
  3. Step 3: Tighten the screws after adjusting the handle direction and complete.

3.5 Install Exterior Assembly

  1. Install the waterproof rubber plate to the exterior assembly.
  2. Install the square shaft into the spindle hub. Press the metal dot, align the dot with the spindle hub hole and install.
  3. Install the exterior assembly with screw casings.
  4. Install the exterior assembly.

Diagrams illustrating exterior assembly: Step-by-step visuals show the placement of the rubber plate, square shaft, and screw casings, followed by the final exterior assembly.

3.6 Install Interior Assembly

  1. Secure the mounting plate with screw B.
  2. Connect the wire.
  3. Secure the exterior assembly with screw C.

Diagrams illustrating interior assembly: Visuals show securing the mounting plate, connecting the wire, and attaching the exterior assembly with screw C.

3.7 Installing Batteries

  1. Insert 4 AA alkaline batteries.
  2. Install the battery cover.
  3. Installation Complete.

Diagram showing battery installation: A visual representation of inserting batteries into the lock.

4 User Guide

Please scan this QR code to watch the step-by-step User Guide video to set up your smart lock.

4.1 System Initialization

  1. Open the back panel cover and ensure that batteries are installed and working.
  2. Long press the Reset Button for more than 5 seconds to wake up the lock.
  3. Hear the prompt for entering the initial password, touch the keypad and enter "000 #" to initialize successfully.
  4. Complete the initialization and start to add the door lock to the TTLock App.

Diagram showing Reset Button location.

4.2 Download the TTLock App

Scan the TTLock QR Code to download the app or search "TTLock" in the App Store (iOS) and Google Play (Android) for download.

Diagram showing TTLock QR Code.

4.3 Registration and Login Your TTLock Account

Register a new account (phone number or email) or log in with an existing account.

Diagrams showing app registration and login screens.

4.4 Pair the lock in the APP

  1. Turn on Bluetooth on your smartphone and stay near the lock (within 3 meters).
  2. Click "+" on the App and choose "All Locks" to search the lock.
  3. Touch the keypad of the lock to light it up and then click the one with "+" on the App search results list to pair it in your App.
  4. Rename your lock.
  5. You have paired the lock in your App.

Caution: It is necessary to touch the keypad of the lock to light it up during step 3 operation.

Diagrams showing the app pairing process.

4.5 User Management

4.5.1 Unlock & Lock via Bluetooth

Touch "?" to unlock, or long press "?" to lock. (Your phone needs to be within three meters of the lock).

Diagram showing Bluetooth unlock/lock function.

4.5.2 Generate Passcode

Touch "Generate Passcode" to add a user passcode. There are 6 different password types to choose from. You can enter the password generated on the App on the keyboard of the lock, and don't forget to enter "#" after the passcode to confirm for unlocking.

Diagrams showing passcode generation in the app.

4.5.3 Send e-Key

Touch "Send eKey" on the App; you can send the e-key to other users of TTLock to authorize the App unlock function. (The Receiver must download the App and set up an account).

Diagrams showing the e-key sending process.

4.5.4 Add Card

Touch "IC Card" to add a user card for your lock. You can create a permanent card or timed card as your need. Name the card and touch "OK", and then place a card on the keypad of the lock.

Diagrams showing the card adding process.

4.5.5 Add Fingerprint

Touch "Fingerprint" to add a user fingerprint for your lock. You can add a permanent fingerprint or timed fingerprint as your need. Name the fingerprint and place your finger on the fingerprint reader as prompted by the App.

Warm Tips: For the elderly and children or people with lighter fingerprints, create more fingerprint files and enter different angles of their fingerprints, which will help improve the fingerprint recognition rate.

Diagrams showing the fingerprint adding process.

4.5.6 Unlock Record
  1. Click "Records" to query your unlock record as shown in the figure.
  2. Refresh door lock record:
    • Within Bluetooth distance, you can refresh and view all unlocking records.
    • Beyond the Bluetooth distance, you need to connect the extra Wi-Fi Gateway (YAMIRY sold separately) to remotely refresh and view all unlocking activities of the door lock.

Diagrams showing the unlock record interface.

4.5.7 Remote Unlock via WiFi (Option)

If you want to remotely control your lock via the APP anywhere, you need an extra WiFi Gateway (YAMIRY sold separately) to connect your lock to the WiFi network. (Refer to the manual of WiFi Gateway to connect).

Touch "Settings" and find the "Remote Unlock" option. Turn on the Remote Unlock function. And then back to the homepage of the App, you can touch "?" for remote unlock via WiFi.

Diagrams showing the remote unlock setup via WiFi.

5. Using Your Lock

5.1 Unlock From Outside

  1. Fingerprint: Place your finger on the fingerprint reader to unlock.
  2. User Code: Enter a 6-9 digit code and press "#" to unlock.
  3. Card: Swipe your card on the keypad of the lock to unlock.
  4. Smartphone: Use your smartphone to unlock. Please refer to the guide in the TTLock App.

Diagrams illustrating the different unlocking methods.

5.2 Reset the Lock

Please note all data will be erased if you reset your lock to factory default.

  1. If you are using TTLock App as administrator, please click "Delete" in the App's Settings screen and enter your passcode of TTLock account to remove your lock from TTLock App.
  2. You can also long press the Reset Button on the back of the Interior Assembly until you hear the prompt for entering the initial password, touch the keypad and enter "000 #" to reset your lock. (Refer to 4.1)

5.3 Replace Batteries

Please use 4 high-quality alkaline AA batteries for replacement when the battery is dead.

5.4 5V Emergency Power

Micro USB interface is used to connect a regular 5V power bank to activate the lock in case the battery is dead. Note: The Micro USB interface is only used for emergency unlock and cannot be used for battery charging.

5.5 Emergency Key Unlock

Emergency key can be used when the battery is dead. Note: Keep at least one key outside your house so you can get it to unlock in case of emergency.

5.6 Anti-peep Keypad

The lock supports up to 16-digit Vague Code. Just enter any 16-digit code, as long as a correct code is included in what you entered, you can open the door.

Example:

Models: H1B Keyless Entry Door Lock, H1B, Keyless Entry Door Lock, Entry Door Lock, Door Lock, Lock

File Info : application/pdf, 16 Pages, 1.82MB

PDF preview unavailable. Download the PDF instead.

A1gEMSqrS1L

References

GPL Ghostscript 9.53.3

Related Documents

PreviewYamiry YR01 Smart Lever User Manual
User manual for the Yamiry YR01 Smart Lever, detailing installation, user guide, and FAQs for this keyless entry door lock.