Premium Home Solution Use and Care Guide
Model: PV-416-TR (Also available as PV-416-T)
Brand: Premium Home Solution
Product Overview
This document provides essential information for the proper use, care, and assembly of your Premium Home Solution outdoor furniture. We appreciate your trust and confidence in our products, designed to enhance your home. Visit us online for our full range of home improvement products.
Key Features: Valuable, Durable, Enjoyable.
Safety Information
- Do not completely tighten screws until all screws are started. Tighten each bolt firmly and properly.
- Some parts may contain sharp edges. Wear protective gloves as necessary.
- Children under the age of 16 should not be engaged in the assembly, removal, or disassembly of the product.
- Children under the age of 10 should be supervised by a competent adult while using this furniture.
- Please keep children out of the assembly area during assembly.
- This set is heavy and may require two adults for safe assembly.
- Never use this product as a support. Do not shake, lean, or climb on the product at any time.
DANGER: Do not allow children to play with plastic wraps or small parts to prevent potential choking hazard. ?
CAUTION: Read all instructions before assembly. Failure to do so may result in faulty assembly and potential injury! ⚠️
Warranty
LIMITED WARRANTY
This is a limited warranty, applicable to the original purchase (proof of purchase required). It is a residential warranty and does not apply to commercial use. This collection carries a (1) year limited warranty, valid from the original date of purchase to the original owner.
WHAT IS COVERED
Premium Home Solution warrants the frame to be free of manufacturing defects to the original purchaser for one year.
WHAT IS NOT COVERED
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing, or abusive use. Additionally, purchased parts are not covered. Premium Home Solution reserves the right to make substitutions with similar merchandise if a model is no longer in production.
For a copy of our full limited warranty, please contact customer service.
Cleaning and Maintenance
- Clean the furniture with a damp cloth, rinse thoroughly. Dry frame parts completely. Do not use bleach, acid, or other solvents on the textile or metal parts.
- We recommend the use of furniture covers to protect the product when not in use.
- Inspect and tighten all screws on a regular basis to ensure proper performance and safety.
- To prolong the life and beauty of your product, we recommend storing it in a dry and protected area during off-season periods.
Assembly Instructions
Assemble the item on a soft, non-abrasive surface, such as carpet or cardboard, to avoid damaging the item. Seek assistance for bulky or heavy items.
NOTE: Identify all parts packed in the carton against the parts list. Remove all protective material carefully and DO NOT use a knife to prevent scratching the furniture.
Model PV-416-TR (Sofa)
Package Contents (PV-416-TR)
- Part A
X1 (Frame component) - Part B
X1 (Armrest) - Part C
X1 (Seat frame) - Part D
X1 (Leg/Support) - Part G
X1 (Cushion) - Part H
X1 (Cushion) - Part I
X1 (Frame component) - Part Y
X3 (Seat Cushions) - Part Z
X3 (Back Cushions) - Hardware AA
M6x55mm bolt
X3 - Hardware BB
M6x40mm bolt
X2 - Hardware CC
M6x30mm bolt
X4 - Hardware DD
M6x25mm bolt
X7 - Hardware EE
M6 nut
X3 - Hardware FF
M6 washer
X19 - Tool A
Socket wrench
X2
Note: Hardware not shown to actual size.
Step-by-Step Assembly (PV-416-TR)
Step 1
Attach part C to part B using bolts AA and washers FF. Do not tighten the bolts until the second step is completed. ⚠️
Step 2
Attach parts G and H (cushions) to the frame. This step appears to be illustrative of placing cushions rather than structural assembly. Tighten all bolts now! ✔️
Step 3
Attach part D to the frame using bolts AA and washers FF. Do not tighten the bolt until step 4 is completed. ⚠️
Step 4
Tighten all bolts now! ✔️
Step 5
Place seat cushion Y and back cushion Z. Assembly complete! ✔️
Model PV-416-T (Table)
Package Contents (PV-416-T)
- Part A
X1 (Tabletop or frame component) - Part B
X4 (Legs or frame components) - Part C
X1 (Tabletop or frame component) - Hardware AA
M6x30mm bolt
X12 - Hardware BB
M6 washer
X12 - Tool CC
Socket wrench
X1
Note: Hardware not shown to actual size. This list is based on available diagrams for PV-416-T.
Step-by-Step Assembly (PV-416-T)
Step 1
Attach part C to part B using bolts AA and washers BB. Do not tighten the bolt until the second step is completed. ⚠️
Step 2
Attach part A to the frame using bolts AA and washers BB. Tighten all bolts now! ✔️
Contact Information
For questions, problems, or missing parts, please contact our Customer Service:
- Email: service@alphamarts.com
- Phone: 1-877-606-2818








