Paradox K32LCD+ Keypad

Keypad Features

• LCD: Displays system status and messages.
• Arrow Keys: Used to scroll through menu options.
• Backlight: Press and hold for backlight settings.
• Chime Programming: Press and hold for chime settings.
• AC Light: Indicates power status (ON = power ON; OFF = power OFF).
• StayD Light: Indicates StayD status (ON = StayD ON; OFF = StayD Off).

How To Arm

Arming When Exiting (Regular Arm)

1. Close all zones in the desired partition.
2. Press [ARM] and enter your [ACCESS CODE].

Arming When Staying (Stay/Sleep Arm)

1. Press [STAY] for stay arming or [SLEEP] for sleep arming, then enter your [ACCESS CODE].
2. Select the desired partition (1 or 2). For both, press one, then the other after the beep.

Note: To arm with StayD enabled, refer to the StayD user manual, available at paradox.com. For more information about StayD, contact your installer.

How to Disarm

1. Press [OFF] and enter your [ACCESS CODE].
2. Select the desired partition (1 or 2). For both, press one, then the other after the beep.

Panic Keys

To send a silent or audible alarm to your security company, press and hold one of the key combinations below for two seconds:

Alarm Memory Display

To view the alarms that occurred during the last armed period:

1. Disarm the system.
2. Press [MEM]. All zones that were breached during the last armed period will be displayed. Use the arrow keys to view the zones.
3. Press [ENTER] to save and exit.

Trouble Display

The LCD screen will display all troubles when they occur. To view and clear troubles:

1. Press [TBL].
2. Scroll through the list of troubles using the arrow keys. Refer to the MGSP User Guide for trouble descriptions and instructions.
3. Perform the recommended repair instructions to clear the trouble. If no instructions are given, contact your security company.
4. Press [CLEAR] to exit.

How to Bypass Zones

When a zone is bypassed, it remains unarmed when the corresponding area is armed. To bypass zones:

1. Press [BYP].
2. Enter your [ACCESS CODE].
3. Select the zone you want to bypass by entering the zone number, e.g., zone 3=03.
4. Press [Enter].