Lexon LH70 Bubble Lamp

Product Overview

The Lexon LH70 Bubble Lamp is an LED desk lamp with a touch button and wireless charging surface.

Components:

• 1. Lamp head
• 2. Touch button
• 3. Wireless charging surface
• 4. Output port (OUT)
• 5. LED indicators
• 6. Input port (IN)

Precautions for Use

• The lamp features an integrated LED module. Do not attempt to service or repair it yourself.
• Place the lamp on a dry, flat surface.
• For indoor use only. Avoid extreme temperatures.
• Clean with a soft cloth; avoid chemical cleaning materials.
• Do not place metal objects or magnets on the wireless charging surface.
• Never immerse the device in water.
• Keep out of reach of small children.
• Lexon is not responsible for damages due to improper use.

Installation Instructions

Note: A power adapter (not supplied) with a minimum 20W output is required. A 60W output adapter is recommended for full charging features.

1. Gently remove the lamp from its packaging.
2. Ensure the lamp is in perfect condition.
3. Place the lamp on a flat surface.
4. Connect a USB-C PD or QC power adapter (not supplied) to a wall outlet.
5. Plug the supplied USB-C cable into the power adapter.
6. Plug the other end of the USB-C cable into the lamp's input port (6).

Lamp Features

• Turn ON/OFF: Touch the touch button (2).
• Change Light Color: Touch the touch button (2) to cycle through 9 color options.
• Adjust Brightness: Press and hold the touch button (2).
• To turn OFF: After selecting a color, wait 3 seconds and touch the button (2) again. The last color setting is remembered.
• Cool/Warm Light Mode: Quickly tap the touch area (2) three times. Repeat to return to full lighting mode.

Wireless Charging (A)

Compatible with all Qi-enabled devices.

1. Ensure the lamp is connected to a sufficient power source.
2. Place the mobile device face up on the center of the wireless charging surface (3).
3. When the device is charging correctly, the left LED indicator (5) will turn blue for 30 seconds and then turn off.

Wired Charging (D)

1. Ensure the lamp is connected to a sufficient power source.
2. Plug your mobile device into the lamp's output port (4).
3. When the device is charging correctly, the left LED indicator (5) will blink blue for 10 seconds and then turn off.

LED Indicators & Lamp Status

Product Specifications

• Material: Glass / Aluminium / ABS
• Weight: 430g / 0.95lbs
• Dimensions: Ø13.5 x 29 cm / Ø5.31 x 11.42"
• Max. lumen output: 150 Im
• Light power: 3W
• Color temperature: 2800-5600K
• LED lifetime: 30000h
• Input port: 10W min (5V-2A) - 100W max (20V-5A)
• Wireless charging output: Up to 15W*
• Output power: Up to 40W*
• Battery type: Li-ion 2000 mAh
• Battery voltage: 3.7V
• Lamp on battery only: Up to 6 hours
• Charging system: USB Type-C
• Charging time (USB Type-C): 3 hours
• Operating temperature: 0°C - 35°C
• Warranty: 1 year international*

*Wired & Wireless charging speeds can vary depending on the cable and power source being used.

Compliance Information

European Union Directive

LEXON declares that this device complies with the essential requirements and other relevant provisions of Directive RED 2014/53/EU. The original EU declaration of conformity can be found at: https://www.lexon-design.com/assets/certifications-ce-bubblelamp.pdf

This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user's body and the product.

UK Conformity Assessment

The object described above is in conformity with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206). The original UK declaration of conformity can be found at: https://www.lexon-design.com/assets/certifications-ukca-bubblelamp.pdf

Radiated H-Field: -13.81 dBuA/m(@10m) (for EU / UK only)

TX/RX Frequency Range: 110-148 KHz (for EU / UK only)

Disposal and Recycling Information

Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to public collecting points or points of sale. Details are defined by national law. This symbol on the product, manual, or packaging indicates that the product is subject to these regulations. Recycling and reusing materials contributes to environmental protection.

USA - FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement: The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator and your body.

Canada Compliance Statement

This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-001.

RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body.