Atoll DR400SE CD Player Owner's Manual

Introduction

You have just purchased a CD player with exceptional audiophile performance. Thank you for your confidence in Atoll Electronique products. To get the best performance from your CD player, please read this manual carefully.

What's Included ?

• A CD player.
• A remote control with batteries.
• A power lead.
• This manual with the certificate of guarantee.

Connections

The rear panel features the following connection points:

• 1) Power Input: General plug-in with protection fuse.
• 2) AES/EBU Output: Digital audio output.
• 3) Digital Output (Optical): S/PDIF optical digital audio output.
• 4) Digital Output (Coaxial): S/PDIF coaxial digital audio output.

Front Panel Functions

The front panel includes controls for operating the CD player:

• 9) CD Loader: Ensure the magnetic clamper is placed on the CD before closing the loader.
• 10) Previous Track: Navigate to the previous track.
• 11) Next Track: Navigate to the next track.
• 12) ON/OFF: Power switch.
• 13) Display: Shows track information and status.
• 14) Pause: On standby mode, allows switching to converter/DAC input.
• 15) Stop: Stops playback and cancels any programmed sequences or repeat modes.
• 16) Play: Starts playback.

Remote Control Functions

The remote control mirrors many of the front panel functions (keys 10-16). Additional functions include:

• 17) Input Select (DAC Mode): Selects CD or converter DAC functions. In DAC mode, cycles through digital inputs (Coaxial, Optical, USB-B) using left/right keys. Can be accessed directly in standby mode.
• 18) TIME: Time mode selector. Cycles through:
  • Time of each track (displays "TIME").
  • Total elapsed time of the disc (displays "TOTAL & TIME").
• 19) DISP: Adjusts display brightness or turns it off.
• 20) Search Fast Backward: Fast rewinds through the current track.
• 21) Search Fast Forward: Fast forwards through the current track.
• 22) A-B Repeat: Sets a start point (A) and end point (B) for a section of the disc to repeat.
• 23) Disc Repeat: Cycles through repeat modes: repeat entire disc (CD -R displayed), repeat current track (R1 displayed), or no repeat.
• 24) PROG (Program): Allows programming of playback sequences. Press PROG, select track, press PROG again. Repeat for each track. Press PLAY to start the programmed sequence. Press STOP twice to clear the program.
• 25) SHUF (Shuffle): Enables random playback of tracks on the disc. "SHUFFLE" is displayed briefly. Each track is played only once.

Technical Data

Cautions ?

• Do not plug in the device while it is powered on.
• Place the CD player in a dry, well-ventilated area, away from heat sources.
• Do not place objects on top of the CD player.
• Avoid short circuits.
• In case of problems, do not attempt to repair, disassemble, or reconstruct the unit to avoid electrical shock.
• Keep the CD player away from tuners to prevent interference with HF reception.

CD Clamper

This player is equipped with a high-performance CD drive with a CD uploader system. Always place the magnetic CD clamper on the disc before closing the loader hatch.

Advises

• To optimize performance, switch the device on at least 30 minutes before listening to allow audio stages to reach optimal working temperature.
• The device provides optimal listening quality after this warm-up period.
• For convenience between uses, it is preferable to leave the device in standby mode to maintain its temperature.
• When not in use for extended periods (e.g., overnight or when leaving home), use the main switch to turn off the device.
• For optimal sound quality, use high-quality connection cords. Consult your specialist dealer for advice.

E.C. Marking

Certified conformity with low tension directive 73/23/CEE, directive CEM 89/336/CEE, and national transpositions.

Cleaning

Before cleaning, switch off the appliance. Use a soft, dry cloth. Do not use acetone, white-spirit, ammonia, or abrasive agents. Never attempt to clean the inside of the appliance.

Guarantee

The guarantee is valid for two years from the date of purchase. We recommend asking your dealer to complete the guarantee form and keeping it safe. The guarantee is valid only for correctly used appliances.

Guarantee Form

To present to your dealer with the invoice when returning the appliance:

ATOLL ELECTRONIQUE®
Bd des Merisiers
50370 BRECEY
FRANCE

Dealer Stamp

Date of purchase: ____________________

Place of purchase: ____________________

Buyer signature: ____________________

Company Information

ATOLL ELECTRONIQUE® is a French company that conceives, manufactures, and commercializes all its products.