Ring RTC4000 Cordless Digital Tyre Inflator
Product Overview
The Ring RTC4000 is a cordless digital tyre inflator designed for inflating vehicle tyres and other inflatables. It can also be used for deflating them. This product is intended for private use only and is not suitable for commercial purposes.
Key Features:
- Cordless digital operation
- Inflates and deflates
- Includes various adaptors for different inflatables
- Pre-set pressure settings
- Built-in LED light
Specifications
| Specification | Details |
|---|---|
| Power Supply | 12 V d.c. |
| Max Amperage | 15 A |
| Pressure measurement range | 0-120 PSI / 0-8.3 BAR |
| Decibel rating | 90 dB |
| Product dimensions | 95 x 61 x 150 mm |
| Power cable length | 3 m |
| Air hose length | 0.6 m |
| Operation temperature | -20°C...+60°C |
| USB cable length | 1 m |
Included Accessories
The RTC4000 comes with several accessories for different inflation needs:
- a. Presta valve adaptor
- b. Ball needle
- c. Small inflatable adaptor
- d. Large inflatable adaptor
The device also includes a 12V power cable and a USB-C cable.
How to Use
- Connect to Power: Plug the 12V power cable into the inflator and a 12V power source (e.g., car cigarette lighter).
- Select Unit: Press the 'UNIT' button to cycle through PSI, BAR, and kPa.
- Set Pressure: Use the '+' and '-' buttons to set the desired pressure.
- Save Preset (Optional): Press and hold the 'M' buttons (M1-M4) to save the current pressure as a preset.
- Inflate: Connect the air hose to the tyre or inflatable. Press the 'ON/OFF' button to start inflation. The inflator will automatically stop when the set pressure is reached.
- Deflate: Press and hold the 'ON/OFF' button to activate the deflator function.
- LED Light: Press the LED button to turn the light on or off.
Important Safety Information
- Always wear hearing protection when operating the inflator, as noise can cause hearing damage (90 dB).
- Do not dispose of batteries in household waste, fire, or water. Collect, recycle, or dispose of batteries in an environmentally friendly manner.
- The pressure gauge on the compressor is for guidance only. Always check pressure with a known accurate gauge.
- The compressor can be used without the engine running, but this will drain the battery.
- Ensure correct tyre inflation to reduce fuel consumption and lower CO2 emissions.
Product Care and Maintenance
Keep the inflator clean and dry. Store in a cool, dry place when not in use.
Compliance and Manufacturer Information
This product conforms to UKCA and CE standards. For the full Declaration of Conformity, please visit www.ringautomotive.com/en/product-safety-documents or contact technicalsupport@ringautomotive.com.
Imported by: OSRAM GmbH, Nonnendammallee 44, 13629 Berlin, Germany
Manufactured by: Ring Automotive Limited, Volvox House, Geldered Road, LEEDS, LS12 6NA, UNITED KINGDOM
OSRAM Americas | OSRAM SYLVANIA Homepage
