Aug 12, 2022 — Intended use. The T-Racer can be used with the device supplied. When used with another Kärcher Home & Garden high- pressure cleaner of class K2 or above, ...
T 5 T-Racer Surface Cleaner
Register your product
www.kaercher.com/welcome
59693560 (07/20)
A
B
C
D
E
2
Contents
General notes ...................................................... 3 Illustrations and descriptions in these operating instructions .......................................................... 3 Intended use........................................................ 3 Environmental protection..................................... 3 Accessories and spare parts ............................... 3 Scope of delivery ................................................. 3 Safety instructions ............................................... 3 Symbols on the device ........................................ 3 Device description ............................................... 3 Extension tube installation................................... 4 Operation............................................................. 4 After use .............................................................. 4 Storage................................................................ 4 Care and service ................................................. 4 Troubleshooting guide ......................................... 4 Warranty .............................................................. 4
General notes
Read the original instructions before using the device for the first time and act in accordance with it. Keep the original instructions for future reference or for future owners.
Illustrations and descriptions in these operating instructions
Illustrations and descriptions in these operating instructions may differ from the scope of delivery and equipment for your T-Racer.
Note
Subject to technical changes without notice.
Intended use
The T-Racer can be used with the device supplied. When used with another Kärcher Home & Garden highpressure cleaner of class K2 or above, the high-pressure nozzles must be adapted to the high-pressure cleaner used. Suitable Kärcher high-pressure nozzles can be purchased in specialist shops. Detailed information on the device class is provided in the operating instructions for your high-pressure cleaner. For devices manufactured up to 1991 you require an additional adapter (see "Accessories and spare parts"). The T-Racer is ideally suited for cleaning floor and wall surfaces of various different materials such as tiles, stone, concrete, plastic and wood. Only use the T-Racer in private households.
Environmental protection
The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations. Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish. Working with detergents may only be performed on watertight surfaces with connection to the waste
water sewage system. Do not allow detergent to enter waterways or the soil.
Notes on the content materials (REACH) Current information on content materials can be found at: www.kaercher.de/REACH
Accessories and spare parts
Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.
Scope of delivery
Check the contents for completeness when unpacking. The scope of delivery for your equipment version is shown on the packaging. Please contact your dealer if any accessories are missing or in the event of any shipping damage.
Safety instructions
CAUTION
Do not use the device when persons are in the vicinity of the cleaning head.
Switch the high-pressure cleaner off and disconnect the T-Racer from the high-pressure gun after finishing cleaning work and before performing any work on the T-Racer.
Do not trigger the high-pressure jet at the high-pressure gun until the T-Racer is on the surface to be cleaned.
Recoil danger. Keep proper footing and hold the highpressure gun and extension tube firmly.
Maximum water temperature 60°C (please observe the instructions for your high-pressure cleaner).
Note
Be sure to always adhere to the safety instructions for your high-pressure cleaner and the locally applicable regulations and directives.
Symbols on the device
DANGER
Risk of injury! Never reach under the edge of the T-Racer during operation
HARD
For durable surfaces, e.g. tiles, concrete, stone
SOFT
For sensitive surfaces, e.g. wood
Device description
For the illustrations, refer to the graphics page Illustration A
1 Extension tube
2 Rotor arm height adjustment
3 Casing
4 Bayonet connector with union nut
5 Handle
6 High-pressure nozzle
7 Rotor arm
English
3
Extension tube installation
Note
Ensure that the device components are tightly connected on installation. Illustration B 1. Plug the bayonet into the mounting. 2. Turn the extension until it latches into place. 3. Tighten the union nut. Repeat the procedure for all further extension tubes.
Operation
Note
The extension tubes can be used with all Kärcher accessories.
Note
For optimum cleaning results, do not operate the highpressure cleaner in the Eco mode.
Cleaning floors
Remove coarse dirt from the surface to be cleaned (e.g. by sweeping) before using the device to avoid damage to the T-Racer.
ATTENTION
Damage to the rotor arm The rotor arm can be damaged if it hits edges and corners. Do not move the device over free-standing corners and edges. Illustration C
Note
The T-Racer is not suitable for scraping or scrubbing.
Test the device on an inconspicuous area before using on sensitive surfaces, e.g. wood.
Do not allow it to remain in one area, but keep it in motion.
1. Attach the T-Racer to the high-pressure gun using the extension tube. Illustration B a Press the extension tube onto the bayonet connector of the high-pressure gun. b Turn the extension tube by 90° until it latches into place. c If necessary, repeat the procedure for further connections.
2. Adjust the rotor arm height adjustment. according to the surface to be cleaned.
3. Unlock the lever of the trigger gun. 4. Pull the lever of the trigger gun.
The device switches on. 5. Clean the floor surface by guiding the T-Racer over
the floor surface without exerting excessive pressure.
Cleaning wall surfaces
1. Attach the T-Racer directly to the high-pressure gun. a Press the bayonet connector of the T-Racer into the connection on the high-pressure gun and then turn by 90° until it latches into place. b Tighten the union nut if present.
2. Clean the wall surface.
Rotor arm height adjustment
The clearance of the high-pressure nozzles to the surface to be cleaned can be adjusted via the rotor arm height adjustment.
Adjust the rotor arm height adjustment. according to the surface to be cleaned. Illustration D For powerful cleaning of stubborn soiling on durable surfaces, e.g. tiles, concrete, stone: 1. Set the rotor arm height adjustment to "HARD". For cleaning sensitive surfaces: 2. Set the rotor arm height adjustment to "SOFT".
After use
Rinse off the device with a gentle water stream after use. Detach the T-Racer and any extension tubes from
the high-pressure gun. Rinse off the T-Racer with the high-pressure gun
(without accessories) or wipe down with a damp cloth.
Storage
Store the device in a frost-protected place.
Care and service
Removing/installing the nozzles
The described procedure applies to all nozzles on the device. Illustration E 1. Remove the clip. 2. Pull the high-pressure nozzle out. 3. Fit the high-pressure nozzle. 4. Fit the clip.
Cleaning the high-pressure nozzle
1. Remove the high-pressure nozzle. 2. Flush the high-pressure nozzle with clear water in
both directions. Replace a damaged high-pressure nozzle where necessary. 3. Install the high-pressure nozzle.
Troubleshooting guide
High-pressure cleaner not building up pressure or pulsing High-pressure nozzles clogged or damaged. 1. Remove the high-pressure nozzles. 2. Check the high-pressure nozzles for clogging and
clean if necessary. 3. Check the high-pressure nozzles for damage and
replace if necessary. 4. Flush the T-Race with clear water without the noz-
zles fitted. 5. Install the high-pressure nozzles. Incorrect high-pressure nozzle selected. Use only the same installed nozzle colour with the highpressure cleaner supplied.
Warranty
The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site. (See overleaf for the address)
4
English
!
THANK YOU!
MERCI! DANKE! GRACIAS!
vielen Vorteilen. advantages.
avantages. Registre su producto y aproveche de muchas ventajas.
www.kaercher.com/welcome
Bewerten Sie Ihr Produkt und sagen Sie uns Ihre Meinung. Rate your product and tell us your opinion. Évaluer votre produit et dites-nous votre opinion. Reseñe su producto y díganos su opinión.
www.kaercher.com/dealersearch
Alfred Kärcher SE & Co. KG Alfred-Kärcher-Str. 28-40 71364 Winnenden (Germany) Tel.: +49 7195 14-0 Fax: +49 7195 14-2212
Acrobat Distiller 17.0 (Windows)