Veho GX4 Gaming Headset Guide
1. Guide to the GX-4 Headset
This section details the components of the GX-4 headset.
- 1. 50mm Speaker Driver: The primary audio output component.
- 2. Foam Earpads: Provides comfort during extended use.
- 3. Detachable Microphone: A flexible microphone that can be attached or detached as needed.
- 4. Volume Control (+): Increases the audio volume.
- 5. Volume Control (-): Decreases the audio volume.
- 6. Microphone Mute Switch: Toggles the microphone's audio input on or off.
- 7. Audio Mute Switch: Mutes all audio output from the headset.
- 8. USB-A Cord: Connects the headset to a power source or device.
2. Using the GX-4 Headset
Instructions for connecting and using the headset with different devices.
For use on PC
Place the GX-4 headset on, ensuring the microphone is positioned on the left-hand side. Connect the USB-A cord to a corresponding USB port on your PC. You may need to adjust your PC's audio settings according to your preferences.
For use on console (PlayStation only)
Place the GX-4 headset on, ensuring the microphone is positioned on the left-hand side. Connect the USB-A cord to a corresponding USB port on your console. You may need to adjust your console's audio settings according to your preferences.
3. Audio drivers and software
This section guides you through the preparation, download, and installation of the necessary software and drivers for the GX-4 headset.
Preparation
- Ensure your PC is running Windows® 7, Windows® 8, or Windows® 10. Both 32-bit and 64-bit systems are compatible.
- Remove any existing camera software/drivers.
- Ensure your PC has sufficient free memory.
Download
Software can be downloaded from the Veho website: https://veho-world.com/downloads. Download both the headphone drivers and the setup program.
Software Installation
- Select the folder appropriate for your PC's operating system (Win 7, 8, or 10) and save it to your desktop.
- Run the 'Setup.exe' file.
- Click 'Yes' to allow the UBU software to make changes to your device.
- Select 'Next' to begin the process.
- Read and accept the license agreement, then select 'Next' to continue.
- Connect your headset and select 'Install' to start the installation process.
- Click 'Yes, restart my computer', then select 'Finish'.
- The UBU software should now appear on your desktop.
4. Specifications
Technical specifications for the Veho GX4 Gaming Headset.
Specification | Value |
---|---|
Speaker size | 50mm |
Impedance | 32 ±15%Ω |
Sensitivity | 112dB±3dB |
Frequency range | 20Hz-20KHz |
Microphone | 6.0mm x 2.7mm |
Mic sensitivity | -42+/-3dB |
Mic impedance | ≤2.2ΚΩ |
Directionality | Omnidirectional |
Working current | ≤80mA |
Headset jack | USB-A |
Cord length | 270cm |
Support
For support or troubleshooting regarding your GX4 Gaming Headset, please contact Veho via the chat box on their website:
EC Declaration of Conformity
Veho UK LTD declares that the radio equipment type (VAB-004-GX4) complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at https://veho-world.com/compliance/.
Veho Global Group: PO Box 436, Southampton, SO30 9DH, UK
Veho Europe: 25 Place de la Madeleine, 75008 Paris
This symbol indicates that the product must not be processed as household waste. It should be disposed of correctly according to local guidelines for electrical and battery-operated products to avoid potential harm to the environment and human health.