Instruction Manual for KRAMER models including: KWC-MUSB, KWC-LTN, Receiver for Micro-USB Connector
Installation Instructions. MODELS: KWC-MUSB Receiver for Micro-USB Connector. KWC-LTN Receiver for Lightning Connector. SAFETY WARNING.
File Info : application/pdf, 4 Pages, 440.16KBDocument
Installation Instructions MODELS: KWC-MUSB Receiver for Micro-USB Connector KWC-LTN Receiver for Lightning Connector P/N: 2900- 300620 Rev: 6 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to these installation instructions may be found. We welcome your questions, comments, and feedback. www.kramerAV.com firstname.lastname@example.org KWC-MUSB Receiver for Micro-USB Connector and KWC-LTN Receiver for Lightning Connector Congratulations on purchasing your Kramer KWC-MUSB and KWC-LTN wireless charging receivers. You can use the receivers with the Kramer Wireless Charging (KWC) products. These receivers are used for mobile devices that DO NOT have a builtin wireless charging receiver. Mobile devices with a built-in wireless receiver, compliant with the Qi standard, can be placed directly on the charging spot. The KWC-MUSB Receiver for Micro-USB Connector (see Figure 1) and KWC-LTN Receiver for Lightning Connector (see Figure 2) are wireless power receivers that utilize electromagnetic induction to charge mobile devices wirelessly and are compatible with the Qi standard for wireless chargers. Figure 1: KWC-MUSB Receiver for Micro-USB Connector Figure 2: KWC-LTN Receiver for Lightning Connector Figure 3: Receiver Underside Using the Wireless Charger To use the Kramer receivers: 1. Connect your mobile device to either the KWC-MUSB Receiver for Micro-USB Connector or the KWC-LTN Receiver for Lightning Connector, as required. 2. Place the mobile device with the attached receiver centered on the charging spot (correct side facing the charging spot, see Figure 3) until it's fully charged. You can only charge one mobile device via the charging spot at a time. When charging a mobile device, do not place any metal or magnetic objects over the receiver. Charging a mobile device using the receiver in the vicinity of pacemakers, hearing aids, or similar medical electronic devices may interfere with the function of these devices. Make sure the receivers are used in a cool and well-ventilated environment and away from flammable and explosive objects. Avoid using the receivers in extreme temperatures or high humidity. Specifications PORT: LED INDICATORS: CHARGING EFFICIENCY: CHARGING POWER: STANDARD: SAFETY REGULATORY COMPLIANCE: OPERATING TEMPERATURE: STORAGE TEMPERATURE: HUMIDITY: DIMENSIONS: WEIGHT: COLORS: KWC-MUSB: micro USB receiver KWC-LTN: lightning receiver ON (blue) 70% 5V DC, 700 mA Max Qi CE, FCC 0° to +40°C (32° to 104°F) -40° to +70°C (-40° to 158°F) 10% to 90%, RHL non-condensing 3.7cm x 5cm x 0.85cm (17.2" x 7.2" x 1.7") W, D, H Net: 0.012kg (0.03lb) Gross: 0.032kg (0.07lb) KWC-MUSB: light blue KWC-LTN: light green Specifications are subject to change without notice at www.kramerav.comDorit Philosoph Adobe PDF Library 15.0