Behringer EUROLIVE B1800XP/B1500XP Quick Start Guide

Important Safety Instructions

[!] CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN!

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-quality professional speaker cables with 1/4" TS or twist-locking plugs pre-installed. All other installation or modification should be performed only by qualified personnel.

[!] This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

[!] This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

[!] Caution: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to qualified personnel.

[!] Caution: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

[!] Caution: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

General Safety Guidelines:

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Use only attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Product Disposal:

[Symbol: WEEE Directive] This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.

Do not install in a confined space, such as a book case or similar unit.

Do not place naked flame sources, such as lighted candles, on the apparatus.

Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.

This apparatus may be used in tropical and moderate climates up to 45°C.

Legal Disclaimer

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.

Limited Warranty

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.

Hook-up

This section describes how to connect the EUROLIVE B1800XP/B1500XP subwoofer with satellite speakers. The diagrams illustrate two common setups:

Mono Setup:

A mixer (e.g., XENYX 1222FX) is connected to the B1800XP subwoofer via XLR cables. The subwoofer's THRU or OUTPUT jacks are then used to connect to the satellite speakers (B212D).

Stereo Setup:

A mixer (e.g., XENYX 1222FX) is connected to two B1800XP subwoofers (one for left, one for right) via XLR cables. The subwoofers' THRU or OUTPUT jacks are then used to connect to the satellite speakers (B212D) for each channel.

Note on Pole Mounting: The B1800XP/B1500XP is designed for pole mounting, allowing it to be securely attached to a speaker pole for elevating satellite speakers.

Controls

The EUROLIVE B1800XP/B1500XP features several controls for sound shaping and system integration:

INPUT Jacks (XLR): Accept audio signals via balanced XLR cables.
THRU XLR Jacks: Send out full-range copies of each input signal.
OUTPUT XLR Jacks: Send out filtered copies of each input signal. Each signal is processed through a 100 Hz high-pass filter for use with mid- and high-frequency satellite speakers.
LEVEL Knob: Controls the input gain.
BOOST FREQUENCY Knob: Targets a boost frequency between 40 Hz and 90 Hz.
BOOST Switch: Adds +10 dB of boost to a specific frequency controlled by the BOOST FREQUENCY knob.
HIGH CUT Knob: Controls the upper corner frequency for the subwoofer's amplifier. This control does not affect the THRU A/B or OUTPUT A/B signals.
PHASE Switch (NORM/REV): Reverses the output phase to compensate for frequency cancellation between the subwoofer and satellite speakers. Select the position that delivers the best-sounding result.
POWER LED: Lights up when the speaker is powered on.
SIGNAL LED: Lights up when a signal enters the amplifier at the INPUT XLR jacks.
LIMIT LED: Lights up when the amplifier overloads.
POWER Button: Turns the speaker on and off.
POWER SOURCE Jack: Accepts the included IEC power cable.

Getting Started

Step 1: Setup
Place the speaker(s) in desired locations.
Step 2: Connections
Make all necessary connections. DO NOT turn on the power yet.
Step 3: Initial Settings
Set the controls as shown: LEVEL knob fully counter-clockwise, HIGH CUT knob fully clockwise, BOOST FREQUENCY knob centered, BOOST switch set to the OFF position, and PHASE set to the NORM position.
Step 4: Power On Audio Source
Turn on your audio source.
Step 5: Power On Speaker
Turn on your speaker(s) by pressing the POWER SWITCH. The POWER LED will light up.
Step 6: Adjust Volume
While playing your audio source, adjust the LEVEL knob to the desired volume level. If the LIMIT LED flashes continuously, turn the LEVEL knob back down until the LIMIT LED only lights occasionally.
Step 7: Adjust High Cut and Phase
Slowly rotate the HIGH CUT knob counter-clockwise until you find the best sound balance between the subwoofer and the satellite speakers. To compensate for possible phase cancellation between the subwoofer and other speakers in your system, move the PHASE switch from the NORM position to the REV position. Keep the setting which delivers the best-sounding result.
Step 8: Shape the Sound with Boost
To further shape the sound, move the BOOST switch to the ON position. Rotate the BOOST FREQUENCY knob until you find a suitable frequency.

Specifications

Feature	B1800XP	B1500XP
Amplifier Maximum output power	3000 W *
Type	Class-D
Audio Inputs Input A / B	XLR, servo-balanced
Sensitivity	+4 dBu @ 0 dB (center position) for full rated power
Max input	+22 dBu, balanced, <=1 % THD+N
Input impedance	12 kΩ unbalanced, 24 kΩ balanced
Audio Outputs Thru A / B	XLR, servo-balanced
Output A / B	XLR, servo-balanced
High-pass filter	100 Hz, Butterworth, 18 dB slope
Controls Level	-∞ to +6.0 dB
Boost frequency	40 Hz - 90 Hz, +10 dB
Boost	Switchable
High cut	70 - 150 Hz, Butterworth, 24 dB slope
Phase	0° or 180° phase reverse switch
System Data Frequency range	40 Hz - 150 Hz (+/-3 dB)	45 Hz - 150 Hz (+/-3 dB)
Frequency response	max. 129 dB @ 1m	max. 128 dB @ 1m
Signal-to-noise (20 Hz to 20 kHz)	>100 dB (A-weighted)
Sound pressure level (half space)	18"
Woofer	18"	15"
Limiter	Optical
Indicators Signal LED	Green
Limit LED	Red
Power LED	Amber
Circuit Protection Amplifier protection	Full short circuit, thermal protection
Load Protection	Turn-on/off muting
Power Supply, Voltage (Fuses) USA / Canada / Japan	100-120 V~, 50/60 Hz (T 15 A H 250 V)
UK / Australia / Europe / Korea / China	220-240 V~, 50/60 Hz (T 10 A H 250 V)
Power consumption @ 1/8 rated power	180 W
Mains connection	Standard IEC receptacle
Dimensions / Weight Dimensions (H x W x D)	704 x 549 x 554 mm (27.7 x 21.6 x 21.8")
Weight	44.9 kg (98.9 lbs)	34.4 kg (75.7 lbs)
*independent of limiters and driver protection circuits

Other Important Information

Important Information

1. Register online: Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2. Malfunction: Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under "Support" at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

3. Power Connections: Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FCC Compliance Information

Behringer EUROLIVE B1800XP/B1500XP

Responsible Party Name: Music Tribe Commercial NV Inc.

Address: 5270 Procyon Street, Las Vegas NV 89118, United States

Phone Number: +1 702 800 8290

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Important information: Changes or modifications to the equipment not expressly approved by Music Tribe can void the user's authority to use the equipment.

CE Declaration: Hereby, Music Tribe declares that this product is in compliance with Directive 2014/35/EU, Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC. Full text of EU DoC is available at https://community.musictribe.com/

EU Representative: Music Tribe Brands DK A/S, Address: Ib Spang Olsens Gade 17, DK - 8200 Aarhus N, Denmark

	Behringer EUROLIVE VQ1800D/VQ1500D Quick Start Guide This document provides a quick start guide for the Behringer EUROLIVE VQ1800D and VQ1500D PA subwoofers, covering important safety instructions, hook-up procedures, control descriptions, and specifications.
	Behringer DR18SUB Quick Start Guide: Active PA Subwoofer Comprehensive quick start guide for the Behringer DR18SUB active 2400-Watt 18-inch PA subwoofer, covering safety instructions, controls, setup, specifications, and FCC compliance.
	Behringer DR18SUB Active PA Subwoofer Quick Start Guide Get started quickly with the Behringer DR18SUB, an active 2400-Watt 18-inch PA subwoofer featuring a built-in stereo crossover. This guide provides essential setup and operational information.
	Behringer Eurolive VP Series Loudspeaker User Manual Comprehensive user manual for the Behringer Eurolive VP series loudspeakers, covering models VP2520, VP1800S, VP1520, VP1220F, and VP1220. Includes setup, operation, safety instructions, and technical specifications.
	Behringer EUROLIVE B115D/B112D Quick Start Guide A concise guide to setting up and operating the Behringer EUROLIVE B115D and B112D active PA speaker systems, covering hook-up, controls, and basic operation.
	Behringer EUROLIVE B15X/B12X Quick Start Guide Get started quickly with your Behringer EUROLIVE B15X/B12X powered loudspeaker. This guide covers essential safety instructions, hook-up procedures, controls overview, Bluetooth connectivity, firmware updates, and DSP menu navigation.
	Behringer EUROLIVE B115W/B112W Quick Start Guide - PA Speaker System Get started with the Behringer EUROLIVE B115W/B112W active PA speaker system. Learn about Bluetooth connectivity, integrated mixer, and wireless microphone options for powerful sound reinforcement.
	Behringer EUROLIVE B115MP3/B112MP3 Quick Start Guide Get started quickly with your Behringer EUROLIVE B115MP3/B112MP3 active 2-way PA speaker system. This guide covers essential safety instructions, hook-up procedures, control descriptions, getting started steps, specifications, and important information.