High Speed Hair Dryer
Model No: ZCY883-B
Distributor and Manufacturer Information
Distributor: Xuchang Zhiqian Trading Co., Ltd.
Business Address: BLDG 17, Lvyin Garden, Wuyi Rd., Weidu Dist., Xuchang City, Henan Province, CHINA
Customer Service Team:
Phone No: +8615537409770
Email: ZQIANBEAUTYSERVICE@outlook.com
Manufacturer: Nanyang Zhichuangyuan Technology Co., Ltd.
Factory Address: Building 1, Standardization Workshop, Intersection of Pangu Avenue and Gongye Road, Industrial Agglomeration Zone, Tongbai County, Nanyang City, Henan Province
Made in: China
Product Features
High Speed Brushless Motor
This product utilizes a 110,000 RPM high-speed brushless motor duct fan, capable of generating extremely strong airflow for rapid hair drying.
Intelligent Temperature Control System
The hair dryer is equipped with an intelligent temperature control system that accurately adjusts and regulates airflow and temperature to prevent overheating.
Intelligent Alternating Cold and Hot Air Function
Briefly pressing the temperature gear allows manual selection and switching between cold and hot air. Pressing and holding the temperature gear activates an intelligent alternating cold and hot air function, cycling between one second of cold air and one second of hot air. A short press of the temperature gear exits this function.
Temperature Control Memory Function
This hair dryer features a built-in temperature control memory function. It will resume operation based on the previous temperature setting when turned off and then on again.
Negative Ion Hair Care Technology
The hair dryer includes a negative ion generator designed to reduce static electricity accumulation. This helps prevent hair deformation, bending, or warping caused by static electricity, thereby protecting the hair.
Low Noise Design
Through optimization of the ductless brushless motor, sharp high-frequency noise is eliminated, resulting in sound frequencies imperceptible to the human ear. The product also incorporates silencing cotton in the air inlet duct and a soft buffer dynamic balance structure for the motor, further reducing noise for an enhanced user experience.
Function Description
The hair dryer features an air outlet. It has 3-color LED indicator lights: Red for hot air, Orange for warm air, and Green for cool air. The device has an "Off & Wind speed gear button" with two gears: Gear 2 for high wind speed and Gear 1 for low wind speed, plus an Off position. A "Temperature control button" allows selection of Hot air, Warm air, or Cool air. Pressing and holding this button for 3 seconds activates the alternate hot and cold function. The device includes a removable magnetic air inlet screen and a removable air inlet filter screen.
Diagram Description: The diagram shows the hair dryer with labels pointing to the air outlet, the LED indicator lights, the Off & Wind speed gear button, the temperature control button, and the removable air inlet filter screen.
Gear Function
The switch/wind speed gear allows quick switching between two wind speeds by pushing up and down. Ensure the switch key is in the off position before connecting the power plug.
| Setting | Description |
|---|---|
| Shutdown (OFF) | Off |
| Low wind speed (-) | Low wind speed |
| High wind speed (=) | High wind speed |
Diagram Description: Three illustrations show the switch in different positions: OFF, Low wind speed (-), and High wind speed (=).
Basic Parameters
| Product Name | High speed hair dryer |
| Product model | ZCY883-B |
| Rated Voltage | 120V |
| Rated frequency | 60HZ |
| Rated Power | 1500W |
| Product size | 276X71X90MM |
Use of Magnetic Suction Nozzle
The hair dryer is equipped with a magnetic suction nozzle for easy attachment and removal. The nozzle can be easily adsorbed by aligning it with the air outlet of the main body of the blower. The shell can be rotated freely for convenient use.
Diagram Description: The diagram illustrates the wind nozzle attached to the hair dryer. Arrows indicate "disassemble adsorbent" and "360° rotation" of the nozzle.
Cleaning/Maintenance
Reminder: The filter screen requires regular cleaning and maintenance to prevent blockage from dust and debris, ensuring optimal airflow.
Cleaning and Maintenance Process:
- Step 1: Before cleaning the filter screen, ensure the hair dryer is turned off and the power plug is unplugged.
Diagram Description: An illustration shows the hair dryer with the power switch in the OFF position and the plug disconnected.
- Step 2: The air inlet filter screen is assembled in a magnetic suction structure. Hold the handle and pull it down directly to detach it from the handle.
Diagram Description: Two illustrations show how to detach the air inlet filter screen from the handle. Arrows indicate pulling downwards.
- Step 3: Do not clean the stainless steel filter screen with water, as this may cause blower failure. Use a dry lint-free cloth, a soft bristle brush, or a toothbrush to remove attachments from the surface of the air inlet filter screen and the stainless steel filter screen.
Diagram Description: An illustration shows the disassembled filter screens: the stainless steel filter screen and the air intake filter screen.
- Step 4: After cleaning, align the air inlet filter screen with the corresponding slot of the handle. When inserting, a "click" sound indicates that the magnet is in place and installation is complete.
Diagram Description: An illustration shows the filter screen being reinserted into the handle, with a "click" sound indicated.
Table of Chemical Element Content of Product
This form is prepared in accordance with SJ/T 11364.
| Part name | Hazardous substances | |||||
|---|---|---|---|---|---|---|
| lead (Pb) | mercury (Hg) | cadmium (Cd) | Hexavalent chromium (Cr(VI)) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ether (PBDE) | |
| Plastic parts | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Hardware | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Heater assembly | ❌ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Motor assembly | ❌ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| Circuit control assembly | ❌ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| power cord | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
| enclosure | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ | ⚪ |
Symbol identification:
- "⚪" Indicates the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T26572.
- "❌" Indicates that the hazardous substance is at least in a homogeneous material of the component, and the content in the material exceeds the limit specified in GB/T26572.
The numbers in this logo indicate the environmental protection of the product under normal use. The service life is 10 years. ?
Common Faults and Troubleshooting
| Category | Common faults | Possible causes of failure | Troubleshooting |
|---|---|---|---|
| Power on does not work | Green light ring flashing alarm | Over temperature of internal components | Restart after one minute or return to the factory for maintenance. |
| Yellow light ring flashing alarm | Internal components damaged | Depot repair | |
| Red light ring flashing alarm | The air inlet or outlet is blocked | Clean the air intake or Air blowing port. | |
| Invalid indicator | Start protector action | Do not switch repeatedly and quickly. | |
| Start up normally | Invalid indicator | Abnormal input voltage | Detection of grid voltage. |
| Invalid indicator | Not connected to the power supply | Check whether the power cord plug is loose. | |
| No response when pressing the hot air button | The lamp loop board is damaged | Depot repair | |
| Reddening of hot filament | The key board is damaged | Depot repair | |
| Power cord or plug overheating | The control board is damaged | Depot repair | |
| Scorching smell in normal use | The power cord is damaged or the plug is loose | Internal components damaged | Depot repair |
Warnings and Safety Precautions
Use and Storage Warnings
- ⚠️ Do not block the air inlet of the hair dryer during operation, or the hot wire may become red, causing a fire.
- Do not soak the hair dryer in water.
- Do not use the hair dryer in a humid environment.
- Please keep the hair dryer dry, otherwise it may cause electric shock.
- Do not use the hair dryer when your hands are wet, otherwise it may cause electric shock or fire due to short circuit.
- Do not use the hair dryer near flammable goods, otherwise it may cause explosion or fire due to short circuit.
- Do not wrap the main power supply line around the main body of the hair dryer during storage, otherwise the main power supply line may be disconnected, resulting in electric shock or fire due to short circuit.
- Do not store it in a highly humid place, otherwise it may cause electric shock or fire due to short circuit.
- Do not store it in the reach of children and infants, otherwise it may cause electric shock or injury.
- Do not repair, disassemble, or refit the hair dryer by yourself, otherwise all hazards may occur due to incorrect operation.
- If the power cord or plug is damaged or heated, do not continue to use it, otherwise it may cause burns, electric shock, or fire.
- For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Consult your installer for advice.
Matters Needing Attention
- ⚠️ WARNING: Do not use this appliance near bathtubs, showers, basins, or other vessels containing water.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- During use, the air outlet and air nozzle may become hot. Please do not touch them with your hands, otherwise they may cause burns.
- Please do not use this hair dryer on infants, otherwise it may cause burns.
- Use the hair dryer in the bathroom. Please unplug it after use.
- Do not pull the power cord forcibly, otherwise it may break the power cord, causing electric shock or short circuit and fire.
- This hair dryer is only used to dry hair. Please do not use it to dry shoes and clothes, otherwise it may easily cause short circuit and fire.
- When cleaning the hair dryer, ensure that the power switch is off and the power plug is unplugged.
- Please regularly use a towel, cotton swab, or toothbrush to remove attachments from the air inlet and outlet.
- Do not press or rub the air inlet and outlet with nails or sharp objects to avoid damaging the product.
- Do not use alcohol, nail polish remover, or detergent to clean the hair dryer, otherwise it may cause malfunction, cracking, and fading.
- The appliance is not to be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Children should be supervised to ensure they do not play with the appliance.
- When the appliance is used in a bathroom, unplug it after use, since the proximity of water presents a hazard even when the hairdryer is switched off.