OPERATION MANUAL [English]. 1st Edition ... Refer also to the Master Setup Unit manual. i 3G/HD SDI I/O ... and BT.2020 color gamut output operation. It also.
CAMERA CONTROL UNIT
HDCU4300
NETWORKED MEDIA INTERFACE BOARD
HKCU-IP43F
ST 2110 INTERFACE KIT
HKCU-4001
12G-SDI EXTENSION KIT
HKCU-4002
OPERATION MANUAL [English] 1st Edition (Revised 4)
Table of Contents
Overview..................................................................... 3 System Configuration .......................................................4
Location and Function of Parts................................ 7 Front Panel.......................................................................7 Rear Panel .......................................................................9 HKCU-IP43F Networked Media Interface Board (Option) .......................................................................10 HKCU-4001 ST 2110 Interface Kit (Option) ...................11 HKCU-4002 12G-SDI Extension Kit (Option) .................11
Connections and Settings ...................................... 12 4K System Connection...................................................12 HD CUTOUT Video System ...........................................13 HFR Video System.........................................................14 HDR Video System ........................................................16 Relationship between Connection Type and BNC Connector Assignment ...............................................17 Paint Functions in HDR MODE and COLOR SPACE ....19 PWS-100NM1 Connection Settings ...............................24
Status Display .......................................................... 25 Displaying the Status Screen .........................................25 Status Display Screen ....................................................25
Menu Settings .......................................................... 28 Changing Menu Item Settings ........................................28 Menu Tree......................................................................30 Menu List........................................................................35
Appendix .................................................................. 63 Precautions ....................................................................63 Error Messages..............................................................63
Specifications .......................................................... 64
2
Overview
The HDCU4300 Camera Control Unit connects to a HDC4300 Color Camera or HDC-P43 Multi Purpose Camera1) with an optical fiber cable, and carries out the processing of video signals from the camera and provides an interface with external equipment. Connecting a camera facilitates 4K video shooting or HD high frame rate video shooting. HD normal speed video and SD normal speed video can even be simultaneously output when 4K video shooting and HD high frame rate video shooting. Any one of the following option products (sold separately) can be installed in the unit at a time. HKCU-IP43F Networked Media Interface Board Enables output of video signals and audio signals as IP signals.2) HKCU-4001 ST 2110 Interface Kit Enables operation of the unit in an IP transmission system that conforms to the SMPTE ST 2110 standard.2) HKCU-4002 12G-SDI Extension Kit Enables 12G-SDI output and 6G-SDI output.
1) To connect to the HDC-P43, an HKCU-SM100 CCU Extension Adaptor and a single-mode fiber cable are required.
2) An SFP+ module is required to use IP output.
This unit may be combined with an MSU-1000 series Master Setup Unit (optional) or an RCP-3000/1000 series Remote Control Panel (optional) to form a camera control system. This enables you to configure a system capable of controlling multiple video cameras.
Note Before operating the system, check that the software and ROM versions of each of this unit, HDC4300, HDC-P43, MSU-1000 series, and RCP-3000/1000 series are supported.
3
System Configuration
Note Production of some of the peripherals and related devices shown in the figures may have been discontinued. For advice on choosing devices, please contact your Sony representative or dealer.
HDC4300 connection example
Lens (for ENG/EFP)
HDVF-EL75/L750/L770 Viewfinder
BKW-401 Viewfinder Rotation Bracket
HDC4300 Color Camera
HDVF-20A HDVF-200 HDVF-EL20 HDVF-EL30 Viewfinder
PWS-100NM1 IP Live System Manager Station
VCT-14 Tripod Attachment
Tripod
Camera hanger a)
USB flash drive CAC-6 Return Video Selector
Intercom Headset
CAC-12 Microphone Holder
Microphone
HDC4300 Color Camera
Optical fiber cable BNC×4
or BNC×1 d)
Sync signal input Return video input
Intercom
NXL-FR318 Signal Processing Unit b)
4K Video Monitor
< or c) m
Network Switch
Optical fiber cable e) CCA-5
HDVF-EL70 HDVF-700A Viewfinder
USB flash drive CAC-6 Return Video Selector
Intercom Headset
LAN cable BNC BNC
HDCU4300
2K Video Monitor
RCP-3000/1000 series Remote Control Panel
Video Monitor
Waveform Monitor
Microphone
Video Router
Hub HDLA1500-series Large Lens Adaptor
CAC-6 Return Video Selector
LAN cable
Lens (for studio camera)
V-wedge shoe (supplied with tripod)
Tripod
Intercom Headset
Microphone
BKP-7911 Script Holder
MSU-1000 series Master Setup Unit
a) Supplied with HDLA1500 series (Part No.: A-1128-405-A) b) Install NXLK-IP40F SDI-IP Converter Board (option). c) Only one of the HKCU-IP43F, HKCU-4001, and HKCU-4002 can be used
at a time. d) Install HKCU-4002 12G-SDI Extension Kit (option). e) Install HKCU-IP43F (option) or HKCU-4001 (option) for communication
with IP devices.
4
HDC-P43 connection example
AC-DN10/DN10A AC Adapter
AC power supply
Sync signal input Return video input
4K Video 2K Video Monitor Monitor
BNC×4 or BNC×1 b) BNC
Lens (for ENG/EFP)
HDC-P43 Multi Purpose Camera
Single-mode fiber cable (ST connectors, 1 pair)
Optical fiber cable
V shoe
VCT-14 Tripod Attachment
Tripod for portable camera
USB flash drive
HKCU-SM100 CCU Extension Adapter a)
Dual HD-SDI video outputs
HDCU4300
LAN cable
Hub
BNC
CCA-5
RCP-3000/1000 series Remote Control Panel
Video Monitor
Waveform Monitor
Video Router
LAN cable
MSU-1000 series Master Setup Unit
a) The transmission distance with a single-mode fiber cable (ST connector) and optical fiber cable is approximately 5 km (max.).
b) Install HKCU-4002 12G-SDI Extension Kit (option).
5
IP transmission connection example
a)
c)
c)
d)
HDCU4300 b)
HDC4300 Color Camera
HDC4300 Color Camera
a)
c)
c)
d)
HDCU4300 b)
MSU-1000 series Master Setup Unit
Optical fiber cable LAN cable
IP switch × 2 10G/25G
IP switch 10G/1G
Audio Mixer Multi Viewer Video Server PTP Master × 2 IP Live System Manager × 2
IP Intercom
IP switch 100M/1G
IP Tally System
a) Signal transfer over a maximum of 2 km is possible. However, the actual transfer distance may vary depending on the system configuration of the cameras and the type of optical fiber cables used.
b) Install the HKCU-4001 ST 2110 Interface Kit. c) Connect to the LAN-1 and LAN-2 connectors of the HKCU-4001 ST 2110 Interface Kit. d) Connect to the LAN-COM connector of the HDCU4300.
6
Location and Function of Parts
Front Panel
3 124
56
7
89
0
qa qs qd
qf
a Red tally indicator Lights in red when this unit receives a red tally signal. You can attach the supplied number plate here.
b Yellow tally indicator Lights in yellow when this unit receives a yellow tally signal.
c Green tally indicator Lights in green when this unit receives a green tally signal.
d CCU number display Displays the camera number set in the CCU menu.
e NMI STATUS indicator or NETWORK indicator · NMI STATUS indicator (when HKCU-IP43F is installed) Displays the NMI-LAN status. Green: Normal status Flashing green: Network synchronization in progress Off: SFP+ module is not installed.
Disconnected from IP Live System Manager. Connection with IP Live System Manager in progress Flashing red: Not locked to network sync signal. Signal reception is unavailable.
· NETWORK indicator (when HKCU-4001 is installed)
Displays the GENLOCK status of the network. Low-speed flashing: PTP master not detected High-speed flashing: Genlock initiated Lit: Genlock achieved Not lit: Network genlock setting disabled
f Status display indicator
REF IN (green): Indicates presence of REFERENCE input signal.
UNLOCK (Red): Not locked to the REFERENCE input signal. NETWORK or RCP/MSU (when HKCU-4001 is installed):
Displays the status when there is a network system connection. On: When CNS MODE on the <CNS SETTINGS> page in
the NETWORK menu is set to either BRIDGE or MCS, this indicates that external control equipment (MSU-1000/1500 Master Setup Unit, RCP-3000/ 1000 series Remote Control Panel, or other equipment) is connected. Flashing: When CNS MODE on the <CNS SETTINGS> page in the NETWORK menu is set to either BRIDGE or MCS, this indicates that the unit cannot connect correctly with external control equipment (MSU-1000/ 1500 Master Setup Unit, RCP-3000/1000 series Remote Control Panel, or other equipment). Off: When CNS MODE on the <CNS SETTINGS> page in the NETWORK menu is set to either BRIDGE or MCS, this indicates that a LAN cable is not connected or that the network system connection settings have not been configured. When CNS MODE on the <CNS SETTINGS> page in the NETWORK menu is set to LEGACY, this remains turned off. COM ERROR (Red): Communication with the camera or external control equipment (such as the RCP-3000/1000 series Remote Control Panel) is not possible. FAN STOP (Red): The fan is stopped.
7
g INTERCOM audio input/output and control block
MIC/PGM (microphone/program) switch INTERCOM (intercom select) switch INTERCOM (intercom adjustment) knob
INTERCOM connector
When the two lamps on the right (green) are lit: Reception status is excellent.
When the second lamp from the right (green) is lit: Reception status is good.
When the second lamp from the left (yellow) is lit: Reception status is low.
When the lamp on the left (red) is lit: Reception status is at the lowest level.
k MENU control block
DISP/MENU lever and indicator CANCEL/ENTER lever
· MIC/PGM (microphone/program) switch ON: Turns the headset microphone on. OFF: Turns the headset microphone off. PGM: Selects program audio output. In this mode, the
INTERCOM knob adjusts the headset program audio level.
· INTERCOM (intercom select) switch Selects the intercom signal input/output connection source for the INTERCOM connector on the front panel. PROD: Connects the producer line. PRIV: Blocks the connection to the producer line or engineer
line, allowing private intercom talk between the CCU and the camera. ENG: Connects the engineer line.
· PRIV (private) indicator Lights when the intercom is in private mode.
· INTERCOM (intercom adjustment) knob Adjusts the receiver audio level of the intercom.
· INTERCOM connector (XLR 5-pin) Connects the intercom headset.
To use a headset with a plug other than an XLR 5-pin plug, consult a Sony service or sales representative.
h MAIN POWER switch and indicator Turns the entire camera system on and off, including this unit, the video camera, and the RCP-3000/1000 series Remote Control Panel connected to the REMOTE connector of this unit. Switch to "?" to turn the power on, and switch to "a" to turn the power off. The MAIN indicator lights when the power switch of the unit is turned on. The CAM indicator lights when power is supplied to the video camera.
i CABLE ALARM indicators SHORT (red): Lights in red when the power supply cord of an
optical fiber cable is shorted to the outer sheath, or two power supply cords are shorted. Power is not input to the camera when this indicator lights. OPEN (red): Lights in red when a camera is not connected to the CAMERA connector on the rear panel of this unit via an optical fiber cable.
j Optical signal reception status indicator Indicates the communication status of the camera and CCU.
CONTROL knob
· DISP/MENU lever and indicator Selects the status display or setup menu display. In setup menu mode, the indicator turns on. · CANCEL/ENTER lever In setup menu mode, used to cancel and enter settings. · CONTROL knob (rotary encoder) In status screen mode, used to change the displayed page. In setup menu mode, used to move the cursor on a page and to change menu settings. Pushing the control knob has the same function as setting the CANCEL/ENTER lever to ENTER.
l Assignable button You can set a function for this button via the CCU menu.
m Menu lock switch This locks out operation of the front panel menu operation area.
n Call button When pressed, this outputs a call signal to the camera or external control device (the RCP-3000/1000 series, etc.) that are connected to this unit. Use this when you want to call and speak with the camera operator or external control device operator via intercom. This button lights in red when it is pressed or the call button of other equipment is pressed.
8
Rear Panel
12
3
45
6
7
8
90
qa qs
qd qf
qg
a TRUNK A connector (round 12-pin)
Used to connect to the CCU connector on a video camera via an RS-232C or RS-422A interface. Communication with up to two channels is available.
b RCP/CNU connector (round 8-pin)
Used to connect to an MSU-1000 series Master Setup Unit, CNU-700 Camera Command Network Unit, or RCP-3000/ 1000 series Remote Control Panel via a CCA-5 Connection Cable. Control signals are sent and received via this connector. When using an RCP-3000/1000 series unit, power is also supplied.
c 3G/HD SDI OUTPUT (SDI output) connector (SLOT1)
(BNC-type)
Used to output video signals from the video camera using Multi-Link format comprising 3G-SDI signals or HD-SDI signals. For details about assignments to each signal output connector in the Multi-Link interface, see "Relationship between Connection Type and BNC Connector Assignment" (page 17).
d
(LAN-COM) connector (RJ-45 8-pin)
Used to connect to a LAN. Connect a LAN HUB (10BASE-T/ 100BASE-TX), using a LAN cable (shielded type of category 5 or more).
e AUDIO OUT CH1, CH2 (audio output 1, 2) connectors (XLR 3-pin)
Used to output the audio signal to the AUDIO IN connectors of the video camera.
f CAMERA connector (optical fiber connector) Used to connect a video camera, using an optical fiber cable. All video camera signals, including power supply, control, video, and audio, are sent and received over one optical fiber cable.
Notes
· Dust on the connection surface of the optical fiber cable may result in transmission errors. When not connected, always cover the end of the connector with the supplied cap.
· To connect to the HDC-P43, an HKCU-SM100 CCU Extension Adapter and a single-mode fiber cable are required.
g INTERCOM/TALLY/PGM (intercom/tally/program audio) connector (D-sub 25-pin)
Used to input and output intercom, tally, and program audio signals. Connect to the intercom/tally/program audio connector of the intercom system. REAR PREVIEW function: Pin 10 is assigned for the output
pin of the REAR PREVIEW function.
h RETURN SDI IN 1/2 (3G/HD/SD-SDI return video 1/2) connectors (BNC-type)
Two different 3G/HD/SD-SDI return video input signals may be received independently. The selection of RET 1 or 2 is made by the return switch of the video camera. The aspect ratio can also be selected for an SD signal. The type of input signal on RET 1 and 2 may be set individually using the setup menu, or using the MSU-1000 series Master Setup Unit.
For details on the setup menu, contact a Sony service or sales representative.
Refer also to the Master Setup Unit manual.
i 3G/HD SDI I/O 1/2 (SDI input/output 1/2) connectors (SLOT3) (BNC-type)
These can be used as return video inputs, HD prompter inputs, camera video signal outputs, and HD-TRUNK outputs. Set them in SLOT3 on the <I/F SETTINGS> page of the MAINTENANCE menu according to the application.
j INPUT area
1 PROMPTER 1, 2 (tele-prompter input) connectors (BNC-type)
Input the prompter signal of 1 channel or 2 channels depending on the setting of PROMPTER CHANNEL MODE on the <TRUNK/PROMPTER1> page of the MAINTENANCE menu. When 1 channel is set, the input signal is output from
9
the other connector as is (loop-through). If loop-through output is not used, terminate the unused connector at 75 ohms. When 2 channels are set, both connectors become inputs and they are terminated at 75 ohms inside the unit. If the signal used is a 1.0 Vp-p, 75-ohm analog signal, it may be output from the PROMPTER OUT connector of the video camera with a frequency bandwidth of 5 MHz, regardless of signal format.
2 REFERENCE connectors (BNC-type) Input an HD tri-level reference sync signal or SD reference sync signal (black burst signal, or black burst signal with 10 Field ID) to either of the two connectors. The input signal is output from the other connector as is (loopthrough output). If loop-through output is not used, terminate the unused connector at 75 ohms. The type of reference signal is selected using the setup menu, or using the MSU-1000 series Master Setup Unit.
For details on the setup menu, contact a Sony service or sales representative.
Note When a black burst signal with a 10 Field ID is input, 10F BB on the <GENLOCK> page of the SYSTEM OPERATION menu must be set to ON.
k RETURN VBS IN 3/4 (VBS return video input 3/4) connectors (BNC-type)
Two different VBS return video input signals may be received independently. The selection of RET 3 or 4 is made by the return switch of the video camera. The type of input signal on RET 3 and 4 may be set individually using the setup menu, or using the MSU-1000 series Master Setup Unit. An aspect ratio may also be selected for SD signals.
For details on setup menu operations, contact a Sony service or sales representative.
Refer also to the Master Setup Unit manual.
l 3G/HD SDI OUTPUT (SDI output) connector (SLOT2) (BNC-type)
The signal from the video camera may be output as four 3GSDI signals, HD-SDI signals or SD-SDI signals. They can output signals with superimposed text characters and markers.
For details on settings, contact a Sony service or sales representative.
m NETWORK TRUNK connector (RJ-45 8-pin) Used to connect the NETWORK TRUNK connector of the device connected to the camera with the network connection device.
n OUTPUT area
2 CHARACTER/SYNC (character output / sync signal output) connector (BNC-type)
Outputs the self-diagnostic results or setup menu of the unit as an SD analog video signal. If CHARACTER/SYNC OUT on the <I/F SETTINGS> page of the MAINTENANCE menu is set to SYNC, this connector can also be used as the sync signal output (SYNC) connector. An SD composite sync or HD trilevel sync signal will be output from the internal sync signal generator. For details on how to select the signal, contact a Sony service or sales representative.
o - AC IN (AC power input) connector Use the specified AC power cord to connect to an AC power supply. The AC power cord can be secured to this unit, using the plug holder (optional).
HKCU-IP43F Networked Media Interface Board (Option)
Note For safety, only a qualified technician with service training should perform tasks inside the unit.
The HDCU4300 supports IP output of a single 4K signal or dual HD signals by installing an HKCU-IP43F in the HDCU4300. HDCU4300 software version 1.11 or later is required. In addition, an OTM-10GSR1 or other SFP+ module is required to use IP output. For details about installation, contact a Sony service or sales representative.
1
a NMI-LAN connectors (SFP+) These connectors output IP video signals and audio. The output signal format is the same as the format set for SLOT4.
1 VBS MONITOR (VBS monitor output) connector (BNCtype)
Outputs an SD analog video signal.
10
HKCU-4001 ST 2110 Interface Kit (Option)
Note For safety, only a qualified technician with service training should perform tasks inside the unit. Connection with devices that are SMPTE ST 2110 compliant is supported by installing an HKCU-4001 to the HDCU4300. HDCU4300 software version 2.00 or later is required. An OTM-10GSR1 or other SFP+ module or SFP28 module is required to use IP output.
1
a LAN-1, LAN-2 connectors (SFP+/SFP28) IP video signals and audio input/output, intercom, and network synchronization are supported. This enables three IP outputs and two IP inputs for HD signals on the HDCU4300. For RCP/MSU device connection and IP tally input, use the LAN-COM connector. The input/output signal format is set using the <OUTPUT FORMAT2> page and <RETURN> page in the setup menu.
HKCU-4002 12G-SDI Extension Kit (Option)
Note For safety, only a qualified technician with service training should perform tasks inside the unit. The HDCU4300 supports 4K 2-system 12G-SDI output or 6G-SDI output by installing an HKCU-4002 in the HDCU4300. HDCU4300 software version 1.50 or later is required. For details about installation, contact a Sony service or sales representative.
1
a 12G/6G-SDI output connectors These connectors are 12G-SDI output connectors or 6G-SDI output connectors. The output format is the same as the format set for SLOT1 of the HDCU4300. For details, see page 37.
11
Connections and Settings
4K System Connection
A 4K format camera system is formed by connecting the unit and a video camera (HDC4300 or HDC-P431)) with optical fiber cables. The functions provided by the unit (genlock, power supply to the video camera, various interface functions, etc.) can be used as is.
Connection example
HD signals down-converted from 4K signals can be output from SLOT2 and SLOT3.
1) Requires an HKCU-SM100 CCU Extension Adaptor and singlemode fiber cable.
HD PROMPTER signal output
LEVEL MIC REAR ON
INCOM PROD
LEVEL MIC REAR ON
INCOM PROD
FRONT OFF
ENG
INTERCOM 1
FRONT OFF
ENG
INTERCOM 2
HD TRUNK signal input
Optical fiber cable
DC OUT
EARPHONE
REMOTE
TRACKER
CRANE
RET CTRL LINE
FRONT MIC MIC
+48V OFF
LINE
AES/EBU MIC
+48V OFF
DC IN 10.5-17V
AUDIO IN
CH1
CH2
PROMPTER /GEN LOCK
TEST OUT
SDI MONI
SDI 1 SDI 2
Monitor (4K-QUAD Link)
HDC4300 SDI-MONI
SDI Monitor/Prompter (Digital)
LINK-1 LINK-2 LINK-3 LINK-4
Reference signal input REFERENCE
SDI SDI SDI SDI SDI SDI SDI SDI OUT OUT OUT OUT OUT OUT OUT OUT 12 34 56 78
Switcher (4K-QUAD Link)
CAMERA
RETURN SDI IN SDI I/O 1 SDI I/O 2 SDI OUT SDI OUT LAN
1-2
Return signal input
HD PROMPTER signal
Hub
HD TRUNK signal output
input
3G SDI/ HD SDI Monitor
HD SDI Monitor
For details about the assignments of BNC connectors of the unit, see "Relationship between Connection Type and BNC Connector Assignment" (page 17).
HDCU4300
MSU-1000/1500 Master Setup Unit
RCP-3000/1000 series Remote Control Panel
Settings
Device HDCU4300
HDC4300
Purpose
Menu/Page
Item
Set value
HD system format setting
SYSTEM OPERATION/<MULTI FORMAT> BASE FORMAT Set other than 3G-SDI
Video format setting
SYSTEM OPERATION/<MULTI FORMAT> 4K/HFR FORMAT Video format
Video output format setting
SYSTEM OPERATION/<OUTPUT FORMAT>
SLOT1 to SLOT3 Video output format of each slot
Assignment of function of SDI I/O MAINTENANCE/<I/F SETTINGS> connector
SLOT3 (SDI I/O)
SDI IN3/ HD PROMPTER IN, HD TRUNK OUT
HD-PROMPTER output and HD MAINTENANCE/<SDI OUT> TRUNK input settings
SDI-1 OUT SDI-2 OUT/IN
HD PROMPTER HD TRUNK/RET IN
12
HD CUTOUT Video System
An HD signal can be extracted from the 4K signal by installing the optional SZC-2001/2001M/2001W HD CUTOUT Software in the HDCU4300. The region that is cut out can be controlled using a mouse or other device connected to the HD CUTOUT Controller.
For details about setup and operation, refer to the SZC-2001/ 2001M/2001W User's Guide.
Connection example
HD PROMPTER signal output
The cutout HD signal is output from SLOT1. HD video down-converted from 4K signals can be output from SLOT2, SLOT3, and SLOT4. Also, a wire frame indicating the cutout region can be displayed.
LEVEL MIC REAR ON
INCOM PROD
LEVEL MIC REAR ON
INCOM PROD
FRONT OFF
ENG
INTERCOM 1
FRONT OFF
ENG
INTERCOM 2
HD TRUNK signal input
Optical fiber cable
DC OUT
EARPHONE
REMOTE
TRACKER
CRANE
RET CTRL LINE
FRONT MIC MIC
+48V OFF
LINE
AES/EBU MIC
+48V OFF
DC IN 10.5-17V
AUDIO IN
CH1
CH2
PROMPTER /GEN LOCK
TEST OUT
SDI MONI
SDI 1 SDI 2
HDC4300 SDI-MONI
SDI Monitor/Prompter (Digital)
Reference signal input REFERENCE
HD
HD
CUTOUT-1 CUTOUT-2
SDI
SDI
OUT
OUT
1
3
Switcher (3G/HD SDI)
CAMERA
RETURN SDI IN SDI I/O 1 SDI I/O 2 SDI OUT SDI OUT LAN
1-2
Return signal input
HD PROMPTER signal input
Hub
HD TRUNK signal output
3G SDI/ HD SDI Monitor
HD SDI Monitor
HDCU4300
MSU-1000/1500 Master Setup Unit
RCP-3000/1000 series Remote Control Panel
For details about the assignments of BNC connectors of the unit, see "Relationship between Connection Type and BNC Connector Assignment" (page 17).
CNA-1 Camera Control Network Adaptor
Mouse
Settings
Device HDCU4300
HDC4300
Purpose HD system format setting
Video format setting Video output format setting
HD CUTOUT settings
HD-PROMPTER output and HD TRUNK input settings
Menu/Page
Item
SYSTEM OPERATION/<MULTI FORMAT> BASE FORMAT
SYSTEM OPERATION/<MULTI FORMAT> 4K/HFR FORMAT
SYSTEM OPERATION/<OUTPUT FORMAT>
SLOT1 to SLOT4
SYSTEM OPERATION/<CHU MODE>
CHU MODE
SYSTEM OPERATION/<HD CUTOUT> HD CUTOUT
MAINTENANCE/<SDI OUT>
SDI-1 OUT
SDI-2 OUT/IN
Set value Select 59.94 or 50 frequency format Video format Video output format of each slot HDC(HD CUTOUT) ON (fixed) HD PROMPTER HD TRUNK/RET IN
13
HFR Video System
The unit can transfer HFR video and perform signal processing for the following formats according to the connected camera.
HFR format
1080/59.94P (2x) 1) 1080/50P (2x) 1) 720/59.94P (2x) 2) 720/50P (2x) 2) 1080/59.94P (3x) 1) 1080/50P (3x) 1) 720/59.94P (3x) 2) 720/50P (3x) 2) 1080/59.94P (4x) 1) 1080/50P (4x) 1) 720/59.94P (4x) 2) 720/50P (4x) 2) 1080/59.94i (6x) 1) 1080/50i (6x) 1) 720/59.94P (6x) 2) 720/50P (6x) 2) 1080/59.94i (8x) 1) 1080/50i (8x) 1) 720/59.94P (8x) 2) 720/50P (8x) 2)
Connected device HDC4300, HDC-P43 (without option)
Yes Yes Yes Yes Yes Yes Yes Yes No No No No No No No No No No No No
1) Interlaced output is also supported in HD HFR 1080 format. 2) Selectable only when the format is set to 720P.
1x video can be output at the same time from SLOT2 and SLOT3.
Note The HFR imaging function is dependent on the software version of the connected camera. Check the compatibility of each device before use.
Yes: Supported, No: Not supported
HDC4300, HDC-P43 (when SZC-4002 series installed on the unit) Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
14
Connection example (4x HD)
LEVEL MIC REAR ON
INCOM PROD
LEVEL MIC REAR ON
INCOM PROD
FRONT OFF
ENG
INTERCOM 1
FRONT OFF
ENG
INTERCOM 2
Optical fiber cable
DC OUT
EARPHONE
REMOTE
TRACKER
CRANE
RET CTRL LINE
FRONT MIC MIC
+48V OFF
LINE
AES/EBU MIC
+48V OFF
DC IN 10.5-17V
AUDIO IN
CH1
CH2
PROMPTER /GEN LOCK
TEST OUT
SDI MONI
SDI 1
HD PROMPTER signal output
HDC4300 SDI-MONI
SDI Monitor/Prompter (Digital)
Reference signal input REFERENCE
LINK-1
SDI OUT 1
LINK-2
SDI OUT 3
LINK-3
SDI OUT 5
LINK-4
SDI OUT 7
Storage Unit (PWS-4400, etc.)
CAMERA
RETURN SDI IN SDI I/O 1 SDI OUT 1-2
Return signal input
HD PROMPTER signal input
SDI OUT
LAN Hub
3G SDI/ HD SDI Monitor
HD SDI Monitor
For details about the assignments of BNC connectors of the unit, see "Relationship between Connection Type and BNC Connector Assignment" (page 17).
HDCU4300
MSU-1000/1500 Master Setup Unit
RCP-3000/1000 series Remote Control Panel
15
HDR Video System
When a 4K format camera system is selected, the dynamic range of the camera can be enhanced to produce HDR video output from SLOT1 by setting HDR MODE to Live HDR. Set the HDR Look at the same time. HDR/SDR or 4K/HD can be output from SLOT1. The HD output from SLOT2, SLOT3, and SLOT4 is always SDR video.
HDR Look
The HDR Look is a setting that determines the basic Look (visual performance, attractiveness) of the HDR video. This is a basic setting that determines how the image captured by the camera will be displayed on the display as an HDR image. You can select from the following three settings.
HD PROMPTER signal output
Live: Characteristics based on the traditional Look derived from current SDR images. A powerful image with strong contrast and high color density. Wide dynamic range with substantial image brightness, capturing highlights without overexposure.
Mild: Based on the Live setting but with an overall milder image characteristic.
Natural: HLG original Look. Calm, gentle color density. The actual sensitivity setting is reduced, but with better S/N ratio. Natural can be selected only when the output signal OETF setting is HLG.
LEVEL MIC REAR ON
INCOM PROD
LEVEL MIC REAR ON
INCOM PROD
FRONT OFF
ENG
INTERCOM 1
FRONT OFF
ENG
INTERCOM 2
HD TRUNK signal input
Optical fiber cable
DC OUT
EARPHONE
REMOTE
TRACKER
CRANE
RET CTRL LINE
FRONT MIC MIC
+48V OFF
LINE
AES/EBU MIC
+48V OFF
DC IN 10.5-17V
AUDIO IN
CH1
CH2
PROMPTER /GEN LOCK
TEST OUT
SDI MONI
SDI 1 SDI 2
Monitor (4K-QUAD Link)
HDC4300 SDI-MONI
SDI Monitor/Prompter (Digital)
LINK-1 LINK-2 LINK-3 LINK-4
Reference signal input REFERENCE
SDI SDI SDI SDI SDI SDI SDI SDI OUT OUT OUT OUT OUT OUT OUT OUT 12 34 56 78
HDR/SDR Output 4K/HD Output
CAMERA
RETURN SDI IN SDI I/O 1 SDI I/O 2 SDI OUT SDI OUT LAN
1-2
Return signal input
HD PROMPTER signal input
Hub
HD TRUNK signal output
3G SDI/ HD SDI Monitor
HD SDI Monitor
HDCU4300
MSU-1000/1500 Master Setup Unit
RCP-3000/1000 series Remote Control Panel
For details about the assignments of BNC connectors of the unit, see "Relationship between Connection Type and BNC Connector Assignment" (page 17).
Settings
Device HDCU4300
Purpose Transfer to HDR mode
Menu/Page
Item
SYSTEM OPERATION/<HDR> HDR MODE
SYSTEM OPERATION/<OUTPUT LOOK FORMAT>
SLOT1 OETF
Set value
LIVE HDR (Live HDR video output)
Live Mild Natural
S-Log3 (SR Live recommended setting) HLG (Compliant with HLG format)
16
Relationship between Connection Type and BNC Connector Assignment
The names of output interfaces in Table 1 correspond to connector assignments in Table 2 (page 19). Check the output interface for the format you want to use in Table 1, then check the signal assignments to BNC connectors in Table 2.
Table 1: Relationship between operation mode/signal format and output interface
Operation mode
4K
Frame rate 59.94
50
29.97
25
24
23.98
Slot1 Output format 4K/59.94P 3)
Output interface Quad-Link-1 3G
1080/59.94P 4) 1080/59.94i 4) 4K/50P 3)
Single-Link Single-Link
Quad-Link-1
12G 5) 3G 1.5G 3G
1080/50P 4) 1080/50i 4) 4K/29.97P 1) 3)
4K/29.97PsF 1) 3)
Single-Link Single-Link
Dual-Link-2 Single-Link Dual-Link-2
12G 3G 1.5G 3G 6G 5) 3G
1080/29.97PsF 4) 4K/25P 1) 3)
4K/25PsF 1) 3)
Quad-Link-1 Single-Link Dual-Link-2 Single-Link Dual-Link-2
1.5G
3G 6G 5) 3G
1080/25PsF 4) 4K/24P 1) 3)
4K/24PsF 1) 3)
Quad-Link-1 Single-Link Dual-Link-2 Single-Link Dual-Link-2
1.5G
3G 6G 5) 3G
1080/24PsF 4) 4K/23.98P 1) 3)
4K/23.98PsF 1) 3)
Quad-Link-1 Single-Link Dual-Link-2 Single-Link Dual-Link-2
1.5G
3G 6G 5) 3G
Quad-Link-1 1080/23.98PsF 4) Single-Link
1.5G
Slot2/Slot3 Output format 1080/59.94P(3G), 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i 1080/50P(3G), 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i
1080/29.97PsF(1.5G), 525/29.97PsF
1080/25PsF(1.5G), 625/25PsF
1080/24PsF(1.5G), 1080/50i(1.5G), 625/50i
1080/23.98PsF(1.5G), 1080/59.94i(1.5G), 525/59.94i
17
Operation mode
HD HFR
Frame rate 59.94(8x)
50(8x)
59.94(6x)
50(6x)
59.94(4x)
50(4x)
59.94(3x) 50(3x) 59.94(2x)
50(2x)
HD CUTOUT 59.94
50
Slot1
Output format
1080/59.94i(8x), 720/59.94P(8x) 2)
1080/50i(8x), 720/50P(8x) 2)
1080/59.94i(6x), 720/59.94P(6x) 2)
1080/50i(6x), 720/50P(6x) 2)
1080/59.94P(4x)
1080/59.94i(4x), 720/59.94P(4x) 2)
Output interface Quad-Link-2 3G
Quad-Link-2 3G
Triple-Link-2 3G
Triple-Link-2 3G
Quad-Link-1 Dual-Link-2
3G 1.5G 3G
1080/50P(4x)
1080/50i(4x), 720/50P(4x) 2)
Quad-Link-1 Dual-Link-2
3G 1.5G 3G
1080/59.94P(3x)
1080/59.94i(3x), 720/59.94P(3x) 2)
1080/50P(3x)
1080/50i(3x), 720/50P(3x) 2)
1080/59.94P(2x)
1080/59.94i(2x), 720/59.94P(2x) 2)
Triple-Link-1 Triple-Link-1 Dual-Link-1 Single-Link
3G 1.5G
3G 1.5G
3G 1.5G 3G
1080/50P(2x) 1080/50i(2x), 720/50P(2x) 2)
1080/59.94P 4) 1080/59.94i 4) 720/59.94P 2) 1080/50P 4) 1080/50i 4) 720/50P 2)
Dual-Link-1
Single-Link Single-Link
3G 1.5G 3G 3G 1.5G
Single-Link
3G 1.5G
Slot2/Slot3 Output format 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i 1080/59.94P(3G), 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i
1080/50P(3G), 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i
1080/59.94P(3G), 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i 1080/50P(3G), 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i
1080/59.94P(3G), 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i
1080/50P(3G), 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i
1080/59.94P(3G), 1080/59.94i(1.5G), 720/59.94P(1.5G) 2), 525/59.94i
1080/50P(3G), 1080/50i(1.5G), 720/50P(1.5G) 2), 625/50i
1) Output is P when the division method is 2SI, and PsF when the division method is SQD. 2) Output only when the BASE FORMAT is 720P. 3) A Slot1 output format of "4K" refers to 4096x2160 or 3840x2160. 4) Supported when the BASE FORMAT is 1080. 5) Supported when HKCU-4002 is installed.
18
Figure 1: Slot numbers and BNC connectors
SLOT1
SLOT3
SLOT2
Table 2: Relationship between output interface and BNC connector assignment
MAIN Output Operation mode 4K HD HFR
HD CUTOUT
Output interface Quad-Link-1 Dual-Link-1 Quad-Link-1 Quad-Link-2 Triple-Link-1 Triple-Link-2 Dual-Link-1 Dual-Link-2 Single-Link Perspective Simple HD
4K / HD HFR/HD CUTOUT
SLOT 1 SDI OUT 1-2 a)
SDI OUT 3-4 b)
Link-1
Link-2
Link-1
Link-2
Link-1
Link-2
Link-1/2
Link-3/4
Link-1
Link-2
Link-1/2
Link-3/4
Link-1
Link-2
Link-1/2
Link-3/4
Link-1/2
Link-1/2
CUTOUT
CUTOUT
CUTOUT1
CUTOUT2
SDI OUT 5- 6 c) Link-3 Link-1 Link-3 Link-5/6 Link-3 Link-5/6 Link-1 Link-1/2 Link-1/2 CUTOUT CUTOUT1
SDI OUT 7- 8 d) Link-4 Link-2 Link-4 Link-7/8 (Link-2) (Link-3/4) Link-2 Link-3/4 Link-1/2 CUTOUT CUTOUT2
a) SDI OUT 1 and SDI OUT 2 output the same data. b) SDI OUT 3 and SDI OUT 4 output the same data. c) SDI OUT 5 and SDI OUT 6 output the same data. d) SDI OUT 7 and SDI OUT 8 output the same data.
Paint Functions in HDR MODE and COLOR SPACE
Some paint functions are disabled, depending on the HDR MODE and COLOR SPACE settings on the HDCU4300.
Disabled items can still be adjusted from the PAINT menu on the camera or RCP/MSU, but the settings are not applied to the HDR video that is output from SLOT1.
Paint functions that can be adjusted when HDR MODE is selected
Paint function Gain White
Step Gain Master White Gain R/G/B Balance/C Temp
HDR MODE setting OFF Yes Yes Yes Yes
LIVE HDR Yes Yes Yes Yes
19
Paint function Gamma Black Black Gamma Flare Knee
Detail
Shutter Skin Detail
Saturation
ON/OFF R/G/B/Master Step Gamma R/G/B/Master ON/OFF Range R/G/B/Master ON/OFF R/G/B/Master ON/OFF Knee Point R/G/B/Master Knee Slope R/G/B/Master Auto Knee ON/OFF Auto Knee Point Limit Auto Knee Auto Slope ON/OFF Level Limiter Crispening Level Dep H/V Ratio Frequency Mix Ratio W.Limiter B.Limiter Knee Apt ON/OFF Knee Apt Level Shutter ON/OFF ECS ON/OFF Shutter Level ECS Level ON/OFF Gate ON/OFF Zoom Link ON/OFF Natural Skin DTL ON/OFF Level Phase Width Saturation Y Limit ON/OFF Saturation
HDR MODE setting OFF Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
LIVE HDR (Fixed OETF)
No No Yes Yes Yes Yes Yes Yes (Fixed OFF) No No No No No Yes Yes Yes Yes Yes Yes Yes No Yes Yes (Fixed OFF) No Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes
20
Paint function Matrix
V Mod Saw Low Key Saturation White Clip Knee Saturation Auto Iris
Gamma Table
Noise Suppression Flicker Reduction Black Shading White Shading Black Set OHB Matrix
ATW ALAC
ON/OFF User Matrix ON/OFF User Matrix R-G/G-B/B-R/R-B/G-R/B-G Multi Matrix ON/OFF Multi Matrix Phase Multi Matrix Hue/Saturation Adaptive Matrix ON/OFF Adaptive Matrix Level Preset Matrix ON/OFF Preset Matrix Preset ON/OFF R/G/B/Master ON/OFF Range Low Key Sat ON/OFF R/G/B/Master ON/OFF Knee Sat ON/OFF Pattern Level APL Ratio Iris Gain Standard ON/OFF Standard Hyper ON/OFF Hyper Special ON/OFF Special User ON/OFF User ON/OFF Noise Sup ON/OFF Frequency ACM/Standard R/G/B H/V Para/Saw R/G/B H/V Para/Saw Black Set ON/OFF User Matrix R-G/G-B/B-R/R-B/G-R/B-G Multi Matrix Phase Multi Matrix Hue/Saturation ON/OFF Speed ON/OFF
HDR MODE setting OFF Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
21
LIVE HDR Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
(Fixed OFF) No
(Fixed OFF) No Yes Yes Yes Yes Yes
(Fixed OETF) (Fixed OETF) (Fixed OETF) (Fixed OETF) (Fixed OETF) (Fixed OETF) (Fixed OETF) (Fixed OETF)
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes
Paint functions that can be adjusted when COLOR SPACE is selected
Paint function Gain White Gamma Black Black Gamma Flare Knee
Detail
Shutter Skin Detail
Step Gain Master White Gain R/G/B Balance/C Temp ON/OFF R/G/B/Master Step Gamma R/G/B/Master ON/OFF Range R/G/B/Master ON/OFF R/G/B/Master ON/OFF Knee Point R/G/B/Master Knee Slope R/G/B/Master Auto Knee ON/OFF Auto Knee Point Limit Auto Knee Auto Slope ON/OFF Level Limiter Crispening Level Dep H/V Ratio Frequency Mix Ratio W.Limiter B.Limiter Knee Apt ON/OFF Knee Apt Level Shutter ON/OFF ECS ON/OFF Shutter Level ECS Level ON/OFF Gate ON/OFF Zoom Link ON/OFF Natural Skin DTL ON/OFF Level Phase Width Saturation Y Limit
COLOR SPACE setting
BT.709
BT.2020
BT.2020 COLOR MODE setting
WIDE-F
WIDE-BC
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
22
Paint function
Saturation Matrix
V Mod Saw Low Key Saturation White Clip Knee Saturation Auto Iris
Gamma Table
Noise Suppression Flicker Reduction Black Shading White Shading Black Set
ON/OFF Saturation ON/OFF User Matrix ON/OFF User Matrix R-G/G-B/B-R/R-B/G-R/B-G Multi Matrix ON/OFF Multi Matrix Phase Multi Matrix Hue/Saturation Adaptive Matrix ON/OFF Adaptive Matrix Level Preset Matrix ON/OFF Preset Matrix Preset ON/OFF R/G/B/Master ON/OFF Range Low Key Sat ON/OFF R/G/B/Master ON/OFF Knee Sat ON/OFF Pattern Level APL Ratio Iris Gain Standard ON/OFF Standard Hyper ON/OFF Hyper Special ON/OFF Special User ON/OFF User ON/OFF Noise Sup ON/OFF Frequency ACM/Standard R/G/B H/V Para/Saw R/G/B H/V Para/Saw Black Set
COLOR SPACE setting
BT.709
BT.2020
BT.2020 COLOR MODE setting
WIDE-F
WIDE-BC
Yes
Yes
Yes
(Fixed OFF)
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
23
Paint function OHB Matrix ATW ALAC
ON/OFF User Matrix R-G/G-B/B-R/R-B/G-R/B-G Multi Matrix Phase Multi Matrix Hue/Saturation ON/OFF Speed ON/OFF
COLOR SPACE setting
BT.709
BT.2020
BT.2020 COLOR MODE setting
WIDE-F
WIDE-BC
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
PWS-100NM1 Connection Settings
When an HKCU-IP43F is installed and a PWS-100NM1 IP Live System Manager station is connected, settings on the NETWORKED MEDIA INTERFACE page and IP LIVE page
must be configured in the NETWORK menu and also on the PWS-100NM1.
SNMP agent settings
Item
Enable/Disable IP Address
Set value (defaults are underlined)
Enable, Disable 0.0.0.0
Port sysName sysContact sysLocation Sub Agent List V1/V2c
161
Enable/Disable
Enable, Disable
Name
public
Version
V2C
Access Mode
READ_ONLY
ACL Network Address 0.0.0.0 to 255.255.255.255
ACL Prefix Length 0 to 32
Meaning
Fixed value Address for listening for both LAN1 and LAN2. Fixed value ASCII code, up to 63 characters ASCII code, up to 63 characters ASCII code, up to 63 characters Setting not required
ASCII code, up to 32 characters Fixed value Fixed value When set to 0.0.0.0, all access is denied. When set to 0, all access is denied.
Trap Settings dialog
Item
Enable/Disable Name Network Interface Name IP Address
Port Version Type
Set value (defaults are underlined) Enable, Disable public LAN1, LAN2 0.0.0.0 to 255.255.255.255
162 V2C TRAP
Meaning
ASCII code, up to 32 characters Specifies the network to send trap notifications. Specifies the trap destination. SNMP walk/get from the specified trap destination is supported.
Fixed value Fixed value
24
Status Display
The CCU system status can be monitored using a video monitor connected to the PIX connector. For information on monitoring and changing settings, see "Menu Settings" (page 28).
Camera settings
1
2
HDC4300 HJ22eX7.6B
34 5 6
*EX F:4.7
Displaying the Status Screen
The menu screen is controlled using the knob and levers in the MENU control block on the front panel.
DISP/MENU lever
CONTROL knob
To display the status screen
Set the DISP/MENU lever to the DISP position. The most recently viewed status screen page is displayed (when first powered on, the camera settings page is displayed). Turning the CONTROL knob changes the displayed page.
To exit the status screen display
In status screen display mode, set the DISP/MENU lever to the DISP position.
Status Display Screen
The following information is displayed on the status display screen. · Camera settings · System status · Camera system diagnostics · Camera and unit audio status · Camera and unit intercom status · Warning display · NMI-LAN connector status · 12G/6G-SDI connector output status · LAN-1 and LAN-2 connector status · IP stream transmission status
6dB ND:1 CC:A
78 9
TALK
0
1/2000 OFF
qa qs
a CHU MODE indication Displays the CHU MODE (connected camera).
b Lens file name indication Displays the lens file name.
c F drop indication Displayed when an F drop occurs.
d EX (lens extender) indication Displayed during use of the lens extender.
e F-stop value indication Displays the lens F-stop value (iris value).
f Camera auto control information area
Top: Displays the Auto Setup type and execution status. Bottom: Displays the execution item.
g Gain value indication Displays the video output signal gain setting value (dB).
h ND filter indication Displays the currently selected ND filter type.
i CC filter indication Displays the currently selected CC filter type.
j Camera microphone status indication Displayed when the camera microphone is on.
k Shutter speed/Clear scan frequency indication
Displays the shutter speed. When ECS is on, displays the clear scan frequency.
l Shutter/ECS indication Displays the on/off state of the shutter/ECS.
25
Notes
· Items that are turned off using the <DISPLAY> page settings of the VIDEO/MONITOR menu are not displayed.
· A "-" mark is displayed for each item when a camera is not connected.
System status
*System Status*
01/05
CHU Mode :HDC4300
Reference:1080/59.94I Locked
Slot1
:1080/59.94P(3x)/3G-B
Slot2-1 2-2 2-3 2-4
Slot3-1 3-2
:1080/59.94P/3G-A :1080/59.94P/3G-B :1080/59.94P/Link-A :1080/59.94P/Link-B
1080/59.94I 525/59.94I
CHU Mode: CHU MODE (connected camera) setting Reference: Reference signal format used and genlock status
("Not detected" is displayed when a reference signal is not input.) Slot1: Output signal format of SLOT1 Slot2: Output signal format of each connector of SLOT2 Slot3: Output signal format of each connector of SLOT3
Camera system diagnostics
*System Diagnosis*
Optical Condition
CAM ssxxxxxxg OK CCU ssxxxxxxg Warning
02/05
Camera Cable :Connected Power Supply :OK Cable Length : 100m
Network Link Status :Up
CCU No.
:10
Optical Condition CAM: Camera light sensor level Optical Condition CCU: Unit light sensor level Camera Cable: Camera cable connection status Power Supply: Camera power supply status Cable Length: Cable length Network Link Status: LAN connection status CCU No.: CCU number setting status
Camera and unit audio status
*Audio*
Camera MIC Gain CH1 :60dB CH2 :60dB
CCU Audio Out
:AES/EBU
03/05
Camera MIC Gain CH1: Camera microphone circuit 1 amp gain status
Camera MIC Gain CH2: Camera microphone circuit 2 amp gain status
CCU Audio Out: Output format of the AUDIO OUT connector of the unit
Camera and unit intercom status
*Intercom*
Camera Engineer Producer
CCU MIC/PGM Line
:MIC On :MIC Off
:MIC Off :System
04/05
Camera Engineer: Camera microphone status of the ENG line of the camera
Camera Producer: Camera microphone status of the PROD line of the camera
CCU MIC/PGM: Status of MIC/PGM switch on the front of the unit
CCU Line: Intercom system connection status
26
Warning display
*Alarm* CCU:DVP FAN STOP CCU:NETWORK ERROR
05/05
12G/6G-SDI connector output status (when HKCU-4002 is installed)
*12G/6G-SDI Status*
SDI OUT STATUS:
SLOT1-2 OK
06/06
Displays any warning that occurs.
NMI-LAN connector status (when HKCU-IP43F is installed)
*NMI Status*
LAN1 :Link down LAN2 :Link down
LSM1 :Connecting LSM2 :Disabled
Genlock:Freerun
Link1 Link2 Link3 Link4
:Available :Unavailable :Unavailable :Unavailable
06/06
STATUS: 12G/6G-SDI connector output status ("-----" is displayed when there is no output)
LAN-1 and LAN-2 connector status (when HKCU-4001 is installed)
*Network*
LAN 1:Link up SPD 1:25G FEC 1:FC-FEC
LSM 1:Connecting
PTP 1:No master
Ref :1080/59.94 Locked
05/07
2:Link up 2:25G 2:FC-FEC
2:Connecting
2:No master
LAN1: Link status of NMI-LAN1 connector LAN2: Link status of NMI-LAN2 connector LSM1: LSM1 connection status LSM2: LSM2 connection status Genlock: Network Genlock status Link1: Link1 AV stream status Link2: Link2 AV stream status Link3: Link3 AV stream status Link4: Link4 AV stream status
LAN 1: Link status of LAN-1 connector SPD 1: Link speed of LAN-1 connector FEC 1: FEC setting of the LAN-1 connector LSM 1: Connection status of the LAN-1 connector with Live
System Manager PTP 1: Network genlock status of the LAN-1 connector
* The above items are also shown for the LAN-2 connector.
Ref: Used reference format setting and genlock status
27
IP stream transmission status
*IP Stream*
OUT VIDEO 4K VIDEO HD1 VIDEO HD2 VIDEO HD3
AUDIO
INTERCOM
META 4K META HD1 META HD2 META HD3
06/07 IN RETURN1
-----
PGM INTERCOM
OUT: Outgoing IP stream IN: Incoming IP stream -----: No incoming/outgoing stream
Menu Settings
The CCU system and peripheral settings can be checked and modified using a video monitor connected to the PIX connector.
Changing Menu Item Settings
The menu screen is controlled using the knob and levers in the MENU control block on the front panel. Setting the CANCEL/ ENTER lever to the ENTER position and pressing the CONTROL knob perform the same function.
DISP/MENU lever and indicator CANCEL/ENTER lever
CONTROL knob
To display a menu page
Set the DISP/MENU lever to the MENU position. When first powered on, the CCU MENU page is displayed.
To display the CCU MENU page
In menu display mode, turn the CONTROL knob to move the pointer (,) to TOP in the upper right corner of the menu page, then press the CONTROL knob. The CCU MENU showing the menu configuration is displayed.
** CCU MENU **
cSYSTEM OPERATION VIDEO/MONITOR AUDIO/INTERCOM MAINTENANCE NETWORK DIAGNOSIS
Menu name SYSTEM OPERATION
VIDEO/MONITOR AUDIO/INTERCOM
MAINTENANCE NETWORK DIAGNOSIS
Description Input/output signal format and system-related settings Video-related settings Audio- and intercom-related settings CCU configuration settings Network-related settings Displays the unit status.
28
To select an item in the CCU MENU
Turn the CONTROL knob to move the pointer (,) up/down to the desired menu item, then press the CONTROL knob. The most recently viewed page in the selected menu is displayed.
To change the displayed page
1 Turn the CONTROL knob to move the pointer (,) to
the page number, then press the CONTROL knob.
The pointer (,) changes to a flashing question mark (?).
Flashing
<CAMERA I/F>
OUTPUT: CAMERA BAR TEST1
*TEST2
?S01 TOP
START UP VIDEO SIGNAL: BARS
2 Turn the CONTROL knob to change the displayed
page to the desired page, then press the CONTROL knob.
The question mark (?) changes back to the pointer (,). Items on the page can now be selected and changed.
To change a menu item setting
If a question mark (?) is displayed beside the page number, press the CONTROL knob to restore the pointer (,). Items on the page can now be selected and changed.
1 Turn the CONTROL knob to move the pointer (,) to
the desired item, then press the CONTROL knob.
The pointer (,) changes to a flashing question mark (?).
2 Turn the CONTROL knob to change the setting.
To cancel a changed setting Set the CANCEL/ENTER lever to the CANCEL position before pressing the CONTROL knob. The item is restored to its current setting.
To suspend menu changes Set the DISP/MENU lever to the MENU position to exit the menu screen. The DISP/MENU lever can be set to the MENU position again to restart the operation.
3 Press the CONTROL knob.
The question mark (?) changes back to the pointer (,), and the item setting is registered.
4 Repeat steps 1 to 3 to change other settings on the
same page.
To enter a character string
Some menu items require a character string input. Moving the pointer (,) to an item with a character string input and pressing the CONTROL knob displays a rectangular cursor and a list of selectable characters. Turning the CONTROL knob moves the cursor between characters. The following menu item has character strings: · VIDEO/MONITOR menu t <BAR CHARACTER> page t
BAR CHARACTER
1 Move the text cursor to the input position, then press
the CONTROL knob.
A second cursor is displayed in the character list.
2 Turn the CONTROL knob to move the cursor to the
desired character, then press the CONTROL knob.
Repeat steps 1 and 2 to enter other characters. · Select INS to insert a space character at the cursor
position. · Select DEL to delete the character at the cursor
position. · Select RET to return to step 1 without changing the
string. · Entering the maximum number of characters (up to the
right edge) moves the cursor to ESC on the lower right of the character list.
3 Turn the CONTROL knob to move the cursor to END,
then press the CONTROL knob.
The new input string is registered.
To cancel the character string setting Turn the CONTROL knob to move the cursor to ESC, then press the CONTROL knob.
To exit the menu display
In menu display mode, set the DISP/MENU lever to the MENU position.
29
Menu Tree
SYSTEM OPERATION menu
CAMERA I/F (S01) GENLOCK (S02)
MULTI FORMAT (S03)
HDR (S04) OUTPUT FORMAT (S05)
OUTPUT FORMAT2 (S06) b) c)
OUTPUT FORMAT3 (S07) c)
OUTPUT LASER DIODE START UP VIDEO SIGNAL REFERENCE LOCK STATUS GENLOCK
10F BB H-PHASE STEP H-PHASE COARSE V-PHASE SYNC OUT SELECT SYSTEM BASE FORMAT 4K/HFR FORMAT BT.2020 COLOR MODE FRAME CONVERT DELAY HD-SD DELAY HDR MODE SDR GAIN HDR CONTRAST HDR BLACK OFFSET SLOT1
1 OETF LOOK COLOR
2 a) SLOT2
1 2 3 4 SLOT3 1 2 SLOT4 (NMI) b) 1 2 IP OUT(4K) c) 1
OETF LOOK COLOR IP OUT(HD) c) 1 OETF LOOK COLOR 2 OETF LOOK COLOR 3 OETF LOOK COLOR
RETURN (S06) (S08) b) c)
CHU MODE (S07) (S09) b) c) HD CUTOUT (S08) (S10) b) c)
SR Live METADATA(OUTPUT) (S09) (S11) b) c)
RET1 INPUT FORMAT
RET2 INPUT FORMAT
RET3 INPUT FORMAT
RET4 INPUT FORMAT
FRAME SYNCHRONIZER SD-RETURN MATRIX CHU MODE
HD CUTOUT MODE CUTOUT CH
CENTER H CENTER V ZOOM CAMERA TILT CAMERA ROLL FOCAL LENGTH META 1st F 2nd F
a) Displayed when HKCU-4002 is installed b) Displayed when HKCU-IP43F is installed c) Displayed when HKCU-4001 is installed
30
VIDEO/MONITOR menu
AUDIO/INTERCOM menu
COLOR BAR (V01)
BAR CHARACTER (V02) DOWNCONVERT (V03) HFR PAINT OFFSET (V04) MONITOR (V05)
SPIRIT LEVEL (V06) DISPLAY (V07)
4K/HD SDR HDR MF-CB SLOPE
SD SOURCE SELECT
BAR-CHARACTER MOVING SYMBOL
TYPE SIZE 2SI DIAMOND MARKER HFR CHANNEL MARK BAR CHARACTER CLEAR ALL 4K-HD DOWNCONVERT FILTER SD ASPECT NTSC SETUP DETAIL LEVEL DETAIL CRISP CHARACTER LEVEL LEVEL GATE Y-LEVEL1 Y-LEVEL2 GATE MARKER LEVEL ASPECT MARKER SELECT MODULATION ON/OFF MODULATION LEVEL INDICATOR REVERSE H POSITION V POSITION MESSAGE CHU MODE LENS FILE MASTER GAIN MODE MASTER WHITE IND SHUTTER ND FILTER CC FILTER IRIS EXTENDER F DROP MIC
MIC GAIN (A01) AUDIO OUT (A02)
INTERCOM (A03)
FRONT INTERCOM (A04)
IP AUDIO a) (A05)
IP INTERCOM a) (A06)
CAM MIC GAIN CH1 CH2
DELAY ANALOG OUT
CH1 : LEVEL CH1 : ADJUST CH2 : LEVEL CH2 : ADJUST INTERCOM CH PRODUCER INTERFACE SIDE TONE CANCEL TERMINATION ENGINEER INTERFACE SIDE TONE CANCEL TERMINATION PGM1 INPUT PGM2 INPUT MIC/PGM I/F PRIVATE SW INTERCOM MIC INTERCOM MIC TYPE INTERCOM MIC GAIN SIDE TONE LEVEL PGM MIX MODE PGM SEL PGM1 LEVEL PGM2 LEVEL AUDIO OUT FORMAT CH ORDER PGM IN FORMAT CH ORDER INTERCOM OUT FORMAT CH ORDER INTERCOM IN FORMAT CH ORDER
a) Displayed when HKCU-4001 is installed
31
MAINTENANCE menu
NETWORK menu
I/F SETTINGS (M01)
TRUNK/PROMPTER1 (M02)
TRUNK/PROMPTER2 (M03)
MENU SETTINGS (M04)
DATE&TIME (M05)
TALLY INPUT (M06) ALARM SETTINGS (M07) SDI ANCILLARY DATA (M08) SWITCH ASSIGN (M09) OPTION KEY (M10) OTHERS (M11)
SLOT3 (SDI I/O) CHARACTER/SYNC OUT MIC/WF REMOTE REAR PREVIEW TRUNK LINE
CHANNEL MODE INTERFACE PROMPTER CHANNEL MODE NETWORK TRUNK MODE DATA RATE HD PROMPTER SOURCE HD TRUNK PAGE RESUME ALARM JUMP RE DIRECTION CATEGORY PAGE ITEM DATA CAMERA MENU CTRL DATE (YEAR) DATE (MONTH) DATE (DAY) TIME (HOUR) TIME (MINUTE) TIME ZONE (HOUR) TIME ZONE (MINUTE) R-TALLY G-TALLY Y-TALLY FORCE LEGACY CABLE OPEN GENLOCK ERROR VIDEO PAYLOAD ID EMBED AUDIO EMBED META DATA ASSIGNABLE SWITCH
READ INSTALLED OPTIONS LASER DIODE ON BACKUP RETURN VF
IP ADDRESS (N01) CNS SETTINGS (N02) TSL UMD (N03) NETWORKED MEDIA INTERFACE a) (N04)
IP ADDRESS 2 b) (N04)
NETWORK GENLOCK b) (N05)
PTP STATUS b) (N06)
IP LIVE a) b) (N05) a) (N07) b)
IP ADDRESS SUBNET MASK DEFAULT GATEWAY MAC ADDRESS CNS MODE MCS MODE CCU NO MASTER IP ADDRESS TSL UMD PORT PORT NUMBER PACKET STATUS NETWORK INTERFACE
DHCP IP ADDRESS SUBNET MASK DEFAULT GATEWAY MAC ADDRESS PORT DHCP IP ADDRESS SUBNET MASK DEFAULT GATEWAY MAC ADDRESS LINK SPEED 25G FEC PORT NETWORK GENLOCK PROFILE DOMAIN NUMBER COMMUNICATION MODE DELAY REQUEST INTERVAL PTP MASTER INFO IP ADDRESS SYNC INTERVAL PRIORITY 1 PRIORITY 2 STEP LOCK STATUS PTP PORT PORT SEL Time GMClockID MasterID Sync FollowUp DelayReq DelayResp Network Status Delay Jitter IP LIVE SYSTEM MANAGER PORT DHCP PRIMARY IP ADDRESS SECONDARY IP ADDRESS PRIMARY CONNECTION STATUS SECONDARY CONNECTION STATUS MULTICAST ADDRESS b) HITLESS FAILOVER b) ST 2110 4K SAP ANNOUNCE
32
MULTICAST ADDRESS 1 b) (N08)
MULTICAST ADDRESS 2 b) (N09)
MULTICAST ADDRESS 3 b) (N10)
MULTICAST ADDRESS 4 b) (N11)
MULTICAST ADDRESS VIDEO OUT(4K) LAN1-1
IP ADDRESS PORT VIDEO OUT(4K) LAN1-2 IP ADDRESS PORT VIDEO OUT(HD) LAN1-1 IP ADDRESS PORT VIDEO OUT(HD) LAN1-2 IP ADDRESS PORT VIDEO OUT(HD) LAN1-3 IP ADDRESS PORT VIDEO OUT(HD) LAN2-1 IP ADDRESS PORT VIDEO OUT(HD) LAN2-2 IP ADDRESS PORT VIDEO OUT(HD) LAN2-3 IP ADDRESS PORT MULTICAST ADDRESS RETURN LAN1-1 IP ADDRESS PORT SRC IP RETURN LAN1-2 IP ADDRESS PORT SRC IP RETURN LAN2-1 IP ADDRESS PORT SRC IP RETURN LAN2-2 IP ADDRESS PORT SRC IP MULTICAST ADDRESS AUDIO OUT LAN1 IP ADDRESS PORT AUDIO OUT LAN2 IP ADDRESS PORT PGM IN LAN1 IP ADDRESS PORT SRC IP PGM IN LAN2 IP ADDRESS PORT SRC IP MULTICAST ADDRESS INTERCOM OUT LAN1 IP ADDRESS PORT INTERCOM OUT LAN2 IP ADDRESS PORT INTERCOM IN LAN1 IP ADDRESS PORT SRC IP INTERCOM IN LAN2 IP ADDRESS PORT SRC IP
MULTICAST ADDRESS 5 b) (N12)
PING (N04) (N06) a) (N13) b)
SC MULTICAST ADDRESS META OUT LAN1-1
IP ADDRESS PORT META OUT LAN1-2 IP ADDRESS PORT META OUT LAN1-3 IP ADDRESS PORT META OUT LAN2-1 IP ADDRESS PORT META OUT LAN2-2 IP ADDRESS PORT META OUT LAN2-3 IP ADDRESS PORT PORT IP ADDRESS PING STATISTICS TRANSMITTED PACKETS RECEIVED PACKETS PACKET LOSS ROUND-TRIP MIN ROUND-TRIP AVERAGE
a) Displayed when HKCU-IP43F is installed b) Displayed when HKCU-4001 is installed
33
DIAGNOSIS menu
BOARD STATUS (D01)
SERIAL NUMBER (D02) VERSION1 (D03)
VERSION2 (D04)
CAMERA DIAGNOSIS (D05) BOARD STATUS (NMI) a) (D06)
BOARD STATUS (HKCU-4001) b) (D06)
VIF DVP TX DPR NET a) HKCU-4001 b) FAN1 FAN2 CAM POWER SUPPLY HOUR METER MODEL NAME SERIAL NUMBER HKCU-4001 b) HKCU-IP43F a) APPLICATION OS UPDATER MIF VIF TX SY 4K-POST SDP DEC(HDC4300) DPR(NORMAL) DPR(HCO) DPR(Sub) NET a) NMI LSI a) NET1 b) NET2 b) NAME ROM VERSION POWER(NET) POWER(CN) NMI1 SFP+
MODULE TX RX NMI2 SFP+ MODULE TX RX BOARD S/N IF FAN1 FAN2 NET NET1 NET2 BOARD S/N
a) Displayed when HKCU-IP43F is installed b) Displayed when HKCU-4001 is installed
34
Menu List
Note
The following conventions are used in the menu list table. Settings column values (e.g. ON, OFF, 0): Default settings are underlined Execute using ENTER: Press the CONTROL knob or move the CANCEL/ENTER lever to the ENTER position to execute.
SYSTEM OPERATION menu
SYSTEM OPERATION Page name Page No. <CAMERA I/F> S01
<GENLOCK> S02
Item
Set value
Indication
OUTPUT LASER DIODE
START UP VIDEO SIGNAL REFERENCE
LOCK STATUS GENLOCK
10F BB
H-PHASE STEP
H-PHASE COARSE V-PHASE SYNC OUT SELECT
CAMERA, BAR, TEST1, TEST2
Selects the output signal.
TEST1 and TEST2 are not selectable if there is no communication with the camera.
ON, OFF
Turns the optical signal output from the CCU to the camera ON/OFF.
(Displayed only when connected using optical fiber composite cable.)
BARS, GRAY
Selects the signal to output until the unit connects with the camera after power-on.
(NOT DETECTED), (1080/59.94I), (1080/23.98PsF), (720/59.94P), (1080/50I), (1080/24PsF), (720/ 50P), (UNKNOWN)
Signal input of the Reference connector (Display only)
(LOCKED), (NOT LOCKED)
Lock status of the external reference signal (Display only).
HD, SD, NETWORK
Selects the lock mode of the external reference signal. (NETWORK is displayed when HKCU-4001 is installed.)
OFF, ON
Sets whether to use the 10Field ID added to the external reference signal
This can be selected when GENLOCK is SD and <MULTI FORMAT> page t SYSTEM is 1.001(525).
When HD is selected in GENLOCK: 3.01 to +3.45 µsec 0.00
Adjusts the horizontal lock phase in relation to the reference signal (steps)
When SD is selected in GENLOCK: 8.29 to +9.48 µsec 0.00
99 to 99 0
Adjusts the horizontal lock phase in relation to the reference signal (fine adjustment)
0 to 7
Adjusts the vertical lock phase in relation to the reference signal (lines)
SD SYNC, HD SYNC
Sets the output signal of the CHARACTER/SYNC OUT connector
This is enabled only when MAINTENANCE Menu t <I/F SETTINGS> page t CHARACTER/SYNC is SYNC.
35
SYSTEM OPERATION
Page name Page No.
<MULTI FORMAT> S03
Item
SYSTEM BASE FORMAT
4K/HFR FORMAT
BT.2020 COLOR MODE
Set value
Indication
1.001(525), 1.000(625)
Selects the operating frequency of the system.
When 1.001(525) is selected in SYSTEM: 1080/59.94P, 1080/59.94I, 1080/ 29.97PsF, 1080/23.98PsF, 720/ 59.94P
Selects the format of the HD system.
When 1.000(625) is selected in SYSTEM: 1080/50P, 1080/50I, 1080/25PsF, 1080/24PsF, 720/50P
See "4K/HFR FORMAT" (page 41). Sets the 4K/HD HFR operation format based on the BASE FORMAT setting.
WIDE-F, WIDE-BC
WIDE-F: Color space setting closest to BT.2020. Suitable for wide color gamut recording, such as for cinema applications.
WIDE-BC: Can be operated as BT.2020 color gamut with high affinity for 709 color gamut output. Applicable for simultaneous 709 color gamut output and BT.2020 color gamut output operation. It also supports all camera paint functions.
<HDR> S04
FRAME CONVERT DELAY HD-SD DELAY
HDR MODE
Note
When WIDE-F is selected, the MATRIX function is fixed and cannot be adjusted.
0.8, 1.2, 1.6 F@23.98PsF
Sets the video delay time when 2-3 Pulldown. This is enabled only when SYSTEM is 1.001(525).
When 1080/59.94P, 1080/59.94I, 1080/29.97PsF, 1080/23.98PsF, 1080/50P, 1080/50I, 1080/25PsF, or 1080/24PsF is selected in BASE FORMAT: FRAME(1F)
Displays the phase output for SD signals down converted from HD signals.
When 720/59.94P or 720/50P is selected in BASE FORMAT: FRAME(2F)
OFF, LIVE HDR
OFF: Normal shooting operation. LIVE HDR: Used for LIVE HDR shooting.
SDR GAIN
0.0 to 15.0 dB
HDR CONTRAST
100 to 566 %
HDR BLACK OFFSET 99.9 to 99.9, 0.0
Note
When LIVE HDR is selected, camera paint functions can be used for both HDR output and SDR output. However, some paint functions are not supported for HDR output. For details, see "Paint Functions in HDR MODE and COLOR SPACE" (page 19).
Enabled in LIVE HDR mode only. Gain setting applied to SDR output
Enabled in LIVE HDR mode only. HDR output contrast maintained by setting SDR GAIN (Display only)
Enabled in LIVE HDR mode only. HDR output black offset
36
SYSTEM OPERATION
Page name Page No.
<OUTPUT FORMAT> S05
Item
SLOT1 1
OETF
LOOK
COLOR
2 SLOT2
1
2
3
4 SLOT3
1
2
Set value
Indication
See "Formats settable for SLOT1-1" Sets the output signal format of the connector of
(page 41).
SLOT1-1.
SDR, S-Log3, HLG
Sets the gamma curve of the SLOT1 video output. Fixed to SDR when HDR MODE is OFF.
Live, Mild, Natural
SLOT1 Look setting Displays "---" when OETF is set to SDR
BT.709, BT.2020
Selects the color space of SLOT1 video output.
BT.709: 709 color space setting close to HDC-series cameras.
BT.2020: Applicable for color space selected in BT.2020 COLOR MODE on the MULTI FORMAT page.
Fixed to BT.709 if the format is HD resolution and OETF is set to SDR.
See "Formats settable for SLOT1-2 Displays the SLOT1-2 connector output format when (when HKCU-4002 is installed)" SLOT1-1 is set to 4K format. (page 43).
C, M
See "Formats settable for SLOT2 and SLOT3" (page 43). C, M
See "Formats settable for SLOT2 and SLOT3" (page 43). C, M
See "Formats settable for SLOT2 and SLOT3" (page 43). M See "Formats settable for SLOT2 and SLOT3" (page 43).
Sets whether to add characters to the output signal. C: Characters are not added. M: Characters are added.
Sets the output signal format of the SLOT2-1 connector.
Sets whether to add characters to the output signal. C: Characters are not added. M: Characters are added.
Sets the output signal format of the SLOT2-2 connector.
Sets whether to add characters to the output signal. C: Characters are not added. M: Characters are added.
Sets the output signal format of the SLOT2-3 connector.
M: Characters are added.
Sets the output signal format of the SLOT2-4 connector.
C, M
See "Formats settable for SLOT2 and SLOT3" (page 43). C, M
See "Formats settable for SLOT2 and SLOT3" (page 43).
Sets whether to add characters to the output signal. C: Characters are not added. M: Characters are added.
Sets the output signal format of the SLOT3-1 connector.
Sets whether to add characters to the output signal. C: Characters are not added. M: Characters are added.
Sets the output signal format of the SLOT3-2 connector.
37
SYSTEM OPERATION
Page name Page No.
<OUTPUT FORMAT2> S06 (When HKCU-IP43F or HKCU-4001 is installed)
Item
SLOT4(NMI) 1
2
IP OUT(4K) 1
<OUTPUT FORMAT3> S07 (When HKCU-4001 is installed)
OETF LOOK COLOR IP OUT(HD) 1
OETF LOOK COLOR 2
OETF LOOK COLOR 3
OETF LOOK COLOR
Set value
Indication
C See "Formats settable for SLOT4 (NMI) (when HKCU-IP43F is installed)" (page 43). M See "Formats settable for SLOT4 (NMI) (when HKCU-IP43F is installed)" (page 43).
C
Output format
SDR Live, Mild, Natural BT.709, BT.2020
C
Output format SDR, S-Log3, HLG Live, Mild, Natural BT.709, BT.2020 C, M
Output format SDR, S-Log3, HLG Live, Mild, Natural BT.709, BT.2020 C, M
Output format SDR, S-Log3, HLG Live, Mild, Natural BT.709, BT.2020
(When HKCU-IP43F is installed) C: Characters are not added. Sets the output signal format of the SLOT4-1 connector.
M: Characters are added. Sets the output signal format of the SLOT4-2 connector.
(When HKCU-4001 is installed) C: Characters and markers are not added to the output signal (fixed) When the SLOT1-1 connector output signal is a 4K video, the same video is output as an ST 2110 video stream. Displays the same settings as the SLOT1-1 connector.
(When HKCU-4001 is installed) C: Characters and markers are not added to the output signal (fixed) Sets the IP output video signal format. Sets the IP video output. When the SLOT1-1 connector output format is 1080/59.94 or 1080/50 in HDR, the same OETF, LOOK, and COLOR as the SLOT1-1 connector can be selected. Sets whether to add characters and markers to the output signal. C: Characters and markers are not added. M: Characters and markers are added. Fixed to C when 4K format is configured. Sets the IP output video signal format. Sets the IP video output. When the SLOT1-1 connector output format is 1080/59.94 or 1080/50 in HDR, the same OETF, LOOK, and COLOR as the SLOT1-1 connector can be selected. Sets whether to add characters and markers to the output signal. C: Characters and markers are not added. M: Characters and markers are added. Fixed to C when 4K format is configured. Sets the IP output video signal format. Sets the IP video output. When the SLOT1-1 connector output format is 1080/59.94 or 1080/50 in HDR, the same OETF, LOOK, and COLOR as the SLOT1-1 connector can be selected.
38
SYSTEM OPERATION Page name Page No. <RETURN> S06 S08 (When HKCU-IP43F or HKCU-4001 is installed)
<CHU MODE> S07 S09 (When HKCU-IP43F or HKCU-4001 is installed)
Item
Set value
Indication
RET1
INPUT
SDI IN1,
Sets the return video input signal to display when
SDI IN2,
RET1 is selected on the camera.
SDI I/O1,
SDI I/O2 To use the VBS IN 3 input, select SDI I/O1 and set
[When the HKCU-4001 is installed] FORMAT to NTSC or PAL.
IP RET1, IP RET2
To use the VBS IN 4 input, select SDI I/O2 and set FORMAT to NTSC or PAL.
FORMAT
1080/59.94I(PsF)
Sets the format of the input signal selected using INPUT.
For the supported formats that can be selected for each BASE FORMAT setting, see "Formats settable for RETURN FORMAT" (page 46).
RET2
INPUT
SDI IN2 (same input options as RET1)
Sets the return video input signal to display when RET2 is selected on the camera.
FORMAT
1080/59.94I(PsF)
Same as RET1.
RET3
INPUT
SDI I/O1 (same input options as RET1)
Sets the return video input signal to display when RET3 is selected on the camera.
FORMAT
1080/59.94I(PsF)
Same as RET1.
RET4
INPUT
SDI I/O2 (same input options as RET1)
Sets the return video input signal to display when RET4 is selected on the camera.
FORMAT
1080/59.94I(PsF)
Same as RET1.
FRAME SYNCHRONIZER
OFF, ON
Sets the frame synchronizer function for the return signal.
SD-RETURN MATRIX OFF, ON
Sets application of the HD matrix to the SD return signal.
CHU MODE
HDC4300/HDC-P43, HDC(HD CUTOUT)
Sets the camera head to connect.
The unit starts automatically after changing the setting. Restarting may take a few minutes due to internal mode change.
HDC(HD CUTOUT): Select to use the cutout function.
39
SYSTEM OPERATION
Page name Page No.
<HD CUTOUT> S08 S10 (When HKCU-IP43F or HKCU-4001 is installed)
Item HD CUTOUT
MODE
CUTOUT CH CENTER H CENTER V ZOOM
CAMERA TILT CAMERA ROLL FOCAL LENGTH
<SR Live METADATA(OUTPUT)>
S09
S11 (When HKCU-IP43F or HKCU-4001 is installed)
META 1st F 2nd F
Set value OFF, ON
SIMPLE HD, ZOOM&PERSPECTIVE
1, 2 1536 to 1535, 0 810 to 809, 0 1.0 to 4.0, 2.0 45.0 to 45.0, 0 5.0 to 5.0, 0 7 to 500,
OFF, ON LINE9 to LINE20, LINE14 LINE572 to LINE583, LINE577
Indication
Turns the HD cutout function ON/OFF.
Enabled only when HDC(HD CUTOUT) is selected in CHU MODE.
The cutout HD signal from the 4K source is output from SLOT1.
Selects the cutout mode.
SIMPLE HD: Outputs a 1920x1080 HD region cutout from the 4K video as-is. Dual output is supported. The cutout signal set by the CUTOUT POSITION CH1 setting is output from the 1/2 connector and 5/6 connector of Slot1, and the cutout signal set by the CUTOUT POSITION CH2 setting is output from the 3/4 connector and 7/8 connector of Slot1.
ZOOM&PERSPECTIVE: Outputs an HD signal formed by zooming in or out of the cutout region from the 4K video. In this mode, a perspective transformation is performed according to the focal length of the lens, and an image similar to the image obtained by the camera facing the cutout direction is output.
Selects the cutout position channel.
Only channel 1 is available when ZOOM&PERSPECTIVE is selected.
Specifies the cutout position center (horizontal direction, 0: center).
(Setting when MODE is ZOOM&PERSPECTIVE, CUTOUT POSITION ZOOM is 4.0, and FOCAL LENGTH is Infinity)
Specifies the cutout position center (vertical direction, 0: center).
(Setting when MODE is ZOOM&PERSPECTIVE, CUTOUT POSITION ZOOM is 4.0, and FOCAL LENGTH is Infinity)
Specifies the zoom factor (1.0: same position as the 4K video)
Enabled only when ZOOM&PERSPECTIVE is selected.
Specifies the tilt angle of the camera (0: horizontal, positive angles represent upward tilt)
Enabled only when ZOOM&PERSPECTIVE is selected.
Specifies the roll angle of the camera (0: horizontal, positive values represent counterclockwise roll)
Enabled only when ZOOM&PERSPECTIVE is selected.
Specifies the focal length of the lens (unit: mm)
To avoid shape change due to perspective transformation, increase the focal length until "INFINITY" is displayed.
Enabled only when ZOOM&PERSPECTIVE is selected.
SR Live metadata embed on/off setting
Line number used in 1st field
Line number used in 2nd field
40
4K/HFR FORMAT
BASE FORMAT settings 1080/59.94P
1080/59.94I
1080/29.97PsF 1080/23.98PsF 720/59.94P
1080/50P
1080/50I
1080/25PsF 1080/24PsF 720/50P
4K/HFR FORMAT selection options
When CHU MODE is HDC4300/HDC-P43
When CHU MODE is HDC(HD CUTOUT)
4096x2160/59.94P, 1080/59.94P, 1080/59.94P(2x), 1080/59.94P(3x), 4096x2160/59.94P 1080/59.94P(4x)
4096x2160/59.94P, 1080/59.94P, 1080/59.94P(2x), 1080/59.94P(3x), 4096x2160/59.94P 1080/59.94P(4x), 1080/59.94I(6x), 1080/59.94I(8x)
4096x2160/29.97P, 1080/29.97P
4096x2160/23.98P, 1080/23.98P
4096x2160/59.94P, 720/59.94P(2x), 720/59.94P(3x), 720/59.94P(4x), 4096x2160/59.94P 720/59.94P(6x), 720/59.94P(8x)
4096x2160/50P, 1080/50P, 1080/50P(2x), 1080/50P(3x), 1080/50P(4x)
4096x2160/50P
4096x2160/50P, 1080/50P, 1080/50P(2x), 1080/50P(3x), 1080/50P(4x), 1080/50i(6x), 1080/50i(8x)
4096x2160/50P
4096x2160/25P, 1080/25P
4096x2160/24P, 1080/24P
4096x2160/50P, 720/50P(2x), 720/50P(3x), 720/50P(4x), 720/50P(6x), 720/50P(8x)
4096x2160/50P
Formats settable for SLOT1-1
4K/HFR FORMAT settings 4096x2160/59.94P
SLOT1 selection options
When CHU MODE is HDC4300/HDC-P43
4096x2160/59.94P/SQD/3G-A 4096x2160/59.94P/SQD/3G-B 4096x2160/59.94P/2SI/3G-A 4096x2160/59.94P/2SI/3G-B 3840x2160/59.94P/SQD/3G-A 3840x2160/59.94P/SQD/3G-B 3840x2160/59.94P/2SI/3G-A 3840x2160/59.94P/2SI/3G-B z When BASE FORMAT is 1080/59.94P or 1080/59.94I 1080/59.94P/3G-A 1080/59.94P/3G-B 1080/59.94I
4096x2160/29.97P 4096x2160/23.98P 1080/59.94P 1080/59.94P(2x)
z When BASE FORMAT is 720/59.94P 720/59.94P
4096x2160/27.97PsF/SQD/3G-B 4096x2160/27.97P/2SI/3G-B 4096x2160/27.97PsF/SQD 3840x2160/27.97PsF/SQD/3G-B 3840x2160/27.97P/2SI/3G-B 3840x2160/27.97PsF/SQD/3G-B 1080/29.97PsF
4096x2160/23.98PsF/SQD/3G-B 4096x2160/23.98P/2SI/3G-B 4096x2160/23.98PsF/SQD 3840x2160/23.98PsF/SQD/3G-B 3840x2160/23.98P/2SI/3G-B 3840x2160/23.98PsF/SQD/3G-B 1080/23.98PsF
1080/59.94P/3G-A 1080/59.94P/3G-B 1080/59.94I
1080/59.94P(2x)/3G-A 1080/59.94P(2x)/3G-B 1080/59.94I(2x)/3G-B 1080/59.94I(2x)
When CHU MODE is HDC(HD CUTOUT) z When BASE FORMAT is 1080/59.94P or 1080/59.94I 1080/59.94P/3G-A 1080/59.94P/3G-B 1080/59.94I z When BASE FORMAT is 720/59.94P 720/59.94P
41
4K/HFR FORMAT settings
1080/59.94P(3x)
1080/59.94P(4x)
1080/59.94I(6x) 1080/59.94I(8x) 720/59.94P 720/59.94P(2x) 720/59.94P(3x) 720/59.94P(4x) 720/59.94P(6x) 720/59.94P(8x) 4096x2160/50P
SLOT1 selection options
When CHU MODE is HDC4300/HDC-P43
1080/59.94P(3x)/3G-A 1080/59.94P(3x)/3G-B 1080/59.94I(3x)
1080/59.94P(4x)/3G-A 1080/59.94P(4x)/3G-B 1080/59.94I(4x)/3G-B 1080/59.94I(4x)
1080/59.94I(6x)/3G-B
1080/59.94I(8x)/3G-B
720/59.94P
720/59.94P(2x)/3G-B 720/59.94P(2x)
720/59.94P(3x)
720/59.94P(4x)/3G-B 720/59.94P(4x)
720/59.94P(6x)/3G-B
720/59.94P(8x)/3G-B
4096x2160/50P/SQD/3G-A 4096x2160/50P/SQD/3G-B 4096x2160/50P/2SI/3G-A 4096x2160/50P/2SI/3G-B 3840x2160/50P/SQD/3G-A 3840x2160/50P/SQD/3G-B 3840x2160/50P/2SI/3G-A 3840x2160/50P/2SI/3G-B z When BASE FORMAT is 1080/50P or 1080/50I 1080/50P/3G-A 1080/50P/3G-B 1080/50I
4096x2160/25P
4096x2160/24P
1080/50P 1080/50P(2x) 1080/50P(3x) 1080/50P(4x) 1080/50I(6x)
z When BASE FORMAT is 720/50P 720/50P
4096x2160/25PsF/SQD/3G-B 4096x2160/25P/2SI/3G-B 4096x2160/25PsF/SQD 3840x2160/25PsF/SQD/3G-B 3840x2160/25P/2SI/3G-B 3840x2160/25PsF/SQD/3G-B 1080/25PsF
4096x2160/24PsF/SQD/3G-B 4096x2160/24P/2SI/3G-B 4096x2160/24PsF/SQD 3840x2160/24PsF/SQD/3G-B 3840x2160/24P/2SI/3G-B 3840x2160/24PsF/SQD/3G-B 1080/24PsF
1080/50P/3G-A 1080/50P/3G-B 1080/50I
1080/50P(2x)/3G-A 1080/50P(2x)/3G-B 1080/50I(2x)/3G-B 1080/50I(2x)
1080/50P(3x)/3G-A 1080/50P(3x)/3G-B 1080/50I(3x)
1080/50P(4x)/3G-A 1080/50P(4x)/3G-B 1080/50I(4x)/3G-B 1080/50I(4x)
1080/50I(6x)/3G-B
42
When CHU MODE is HDC(HD CUTOUT)
z When BASE FORMAT is 1080/50P or 1080/50I 1080/50P/3G-A 1080/50P/3G-B 1080/50I z When BASE FORMAT is 720/50P 720/50P
4K/HFR FORMAT settings
1080/50I(8x) 720/50P 720/50P(2x)
720/50P(3x) 720/50P(4x)
720/50P(6x) 720/50P(8x)
SLOT1 selection options When CHU MODE is HDC4300/HDC-P43 1080/50I(8x)/3G-B 720/50P 720/50P(2x)/3G-B 720/50P(2x) 720/50P(3x) 720/50P(4x)/3G-B 720/50P(4x) 720/50P(6x)/3G-B 720/50P(8x)/3G-B
When CHU MODE is HDC(HD CUTOUT)
Formats settable for SLOT1-2 (when HKCU-4002 is installed)
SLOT1-1 format setting status 4096x2160/59.94 3840x2160/59.94 4096x2160/27.97 3840x2160/27.97 4096x2160/23.98 3840x2160/23.98 4096x2160/50 3840x2160/50 4096x2160/27.97 3840x2160/27.97 4096x2160/24 3840x2160/24 Other settings
SLOT1-2 output format 4096x2160/59.94P/12G 3840x2160/59.94P/12G 4096x2160/29.97P/6G 3840x2160/29.97P/6G 4096x2160/23.98P/6G 3840x2160/23.98P/6G 4096x2160/50P/12G 3840x2160/50P/12G 4096x2160/25P/6G 3840x2160/25P/6G 4096x2160/24P/6G 3840x2160/24P/6G SLOT1-2 output not supported
Formats settable for SLOT2 and SLOT3
BASE FORMAT settings
1080/59.94P
1080/59.94I 1080/29.97PsF 1080/23.98PsF 720/59.94P 1080/50P
1080/50I 1080/25PsF 1080/24PsF 720/50P
SLOT 2 and SLOT 3 selection options
When CHU MODE is HDC4300/HDC-P43
When CHU MODE is HDC(HD CUTOUT)
1080/59.94P/3G-A, 1080/59.94P/3G-B, 1080/59.94P/ 1080/59.94P/3G-A, 1080/59.94P/3G-B, 1080/59.94P/ Link-A, 1080/59.94P/Link-B, 1080/59.94i, 525/59.94I Link-A, 1080/59.94P/Link-B, 1080/59.94i, 525/59.94I
1080/59.94I, 525/59.94I
1080/59.94I, 525/59.94I
1080/29.97PsF, 525/29.97PsF
1080/23.98PsF, 1080/59.94I, 525/59.94I
720/59.94P, 525/59.94I
720/59.94P, 525/59.94I
1080/50P/3G-A, 1080/50P/3G-B, 1080/50P/Link-A, 1080/50P/Link-B, 1080/50I, 625/50I
1080/50P/3G-A, 1080/50P/3G-B, 1080/50P/Link-A, 1080/50P/Link-B, 1080/50I, 625/50I
1080/50i, 625/50I
1080/50i, 625/50I
1080/25PsF, 625/25PsF
1080/24PsF, 1080/50I, 625/50I
720/50P, 625/50I
720/50P, 625/50I
Formats settable for SLOT4 (NMI) (when HKCU-IP43F is installed)
SLOT1-1 settings
SLOT4(NMI) selection options 1)
When CHU MODE is HDC4300/HDC-P43
When CHU MODE is HDC(HD CUTOUT)
4096x2160/59.94
3840x2160/59.94P/2SI/3G-A, 1080/59.94I
3840x2160/59.94
1080/59.94
1080/59.94I
1080/59.94I
43
SLOT1-1 settings
4096x2160/50 3840x2160/50 1080/50 Other settings
SLOT4(NMI) selection options 1) When CHU MODE is HDC4300/HDC-P43 3840x2160/50P/2SI/3G-A, 1080/50I
1080/50I SLOT4 output not supported
When CHU MODE is HDC(HD CUTOUT)
1080/50I SLOT4 output not supported
1) If SLOT4-1 is set to 4K, SLOT4-2 is unavailable. If SLOT4-1 is set to HD, SLOT4-2 is also set to HD.
Formats settable for IP OUT
BASE FORMAT settings
1080/59.94P 1080/59.94I
SLOT1-1 settings 4K speed
SLOT1 OETF SDR, S-Log3, HLG
1080/59.94P 1080/59.94I
S-Log3, HLG
1080/59.94P 1080/59.94I
SDR
1080/59.94P(2x, 3x, 4x) 1080/59.94i(2x, 3x, 4x)
SDR, S-Log3, HLG
1080/59.94I 1080/59.94i(6x, 8x)
SDR, S-Log3, HLG
IP OUT selection options
IP OUT(4K)-1 3840x2160/59.94P * 4K output OETF is same as SLOT1 OETF. IP OUT-1, IP OUT-2 1080/59.94P/3G-A, 1080/59.94I IP OUT-3 1080/59.94I * HD output OETF is SDR (fixed). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/59.94P/3G-A, 1080/59.94 IP OUT-3 1080/59.94I * OETF can be set to SDR to HDR (SLOT1 setting). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/59.94P/3G-A, 1080/59.94I IP OUT-3 1080/59.94I * OETF is SDR (fixed). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/59.94P/3G-A, 1080/59.94I IP OUT-3 1080/59.94I * OETF is SDR (fixed). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/59.94I IP OUT-3 1080/59.94I * OETF is SDR (fixed).
44
BASE FORMAT settings
1080/50P 1080/50I
SLOT1-1 settings 4K speed
SLOT1 OETF SDR, S-Log3, HLG
1080/50P 1080/50I
SDR, S-Log3, HLG
1080/50P 1080/50I
SDR
1080/50P(2x, 3x, 4x) 1080/50I(2x, 3x, 4x)
SDR, S-Log3, HLG
1080/50I
1080/50I(6x,8x)
SDR, S-Log3, HLG
720/59.94P 4K speed
SDR, S-Log3, HLG
720/50P
720(1x, 2x, 3x, 4x, 6x, 8x)
4K speed
SDR/S-Log3, HLG
720(1x, 2x, 3x, 4x, 6x, 8x) Other settings
IP OUT selection options
IP OUT(4K)-1 3840x2160/50P * 4K output OETF is same as SLOT1 OETF. IP OUT-1, IP OUT-2 1080/50P/3G-A, 1080/50I IP OUT(HD)-3 1080/50I * HD output OETF is SDR (fixed). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/50P/3G-A, 1080/50 IP OUT-3 1080/50I * OETF can be set to SDR to HDR (SLOT1 setting). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/50P/3G-A, 1080/50I IP OUT-3 1080/50I * OETF is SDR (fixed). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/50P/3G-A, 1080/50I IP OUT-3 1080/50I * OETF is SDR (fixed). IP OUT(4K)-1 --IP OUT-1, IP OUT-2 1080/50I IP OUT-3 1080/50I * OETF is SDR (fixed). IP OUT(4K)-1 3840x2160/59.94P * 4K output OETF is same as SLOT1 OETF. IP OUT-1, IP OUT-2, IP OUT-3 --IP output not supported IP OUT(4K)-1 3840x2160/50P IP OUT-1, IP OUT-2, IP OUT-3 --IP output not supported IP output not supported
45
Formats settable for RETURN FORMAT
BASE FORMAT settings 1080/59.94P 1080/59.94I 1080/29.97PsF
1080/23.98PsF
720/59.94P 1080/50P 1080/50I 1080/25PsF
1080/24PsF
720/50P
RETURN FORMAT selection options
SDI IN1, SDI IN2 1080/59.94P 1), 1080/59.94I(PsF), 525/59.94I(PsF)
1080/59.94P 1), 1080/59.94I(PsF), 525/59.94I(PsF)
1080/59.94P 1), 1080/59.94I(PsF), 1080/23.98PsF, 525/59.94I(PsF)
SDI IN3, SDI IN4
1080/59.94P 1), 1080/59.94I(PsF), 525/59.94I(PsF), NTSC
1080/59.94P 1), 1080/59.94I(PsF), 525/59.94I(PsF), NTSC
1080/59.94P 1), 1080/59.94I(PsF), 1080/23.98PsF, 525/59.94I(PsF), NTSC
720/59.94P, 525/59.94I(PsF)
1080/50P 1), 1080/50I(PsF), 625/50I(PsF)
1080/50P 1), 1080/50I(PsF), 625/50I(PsF)
1080/50P 1), 1080/50I(PsF), 1080/24PsF, 625/50I(PsF)
720/59.94P, 525/59.94I(PsF), NTSC
1080/50P 1), 1080/50I(PsF), 625/50I(PsF), PAL
1080/50P 1), 1080/50I(PsF), 625/50I(PsF), PAL
1080/50P 1), 1080/50I(PsF), 1080/24PsF, 625/50I(PsF), PAL
720/50P, 625/50I(PsF)
720/50P, 625/50I(PsF), PAL
1) Level A and Level B of 3G-SDI are detected automatically.
IP RET1, IP RET2 1080/59.94P, 1080/59.94I(PsF) (IP RET not supported)
(IP RET not supported)
(IP RET not supported) 1080/50P, 1080/50I(PsF) (IP RET not supported)
(IP RET not supported)
(IP RET not supported)
46
VIDEO/MONITOR menu
VIDEO/MONITOR
Page name Page No.
<COLOR BAR> V01
Item
4K/HD SDR
HDR
MF-CB
SLOPE SD
SOURCE
SELECT
BAR-CHARACTER MOVING SYMBOL
TYPE SIZE 2SI DIAMOND MARKER
Set value
Description
SDR-LOOK BAR 16:9(100%), SDR-LOOK BAR 16:9(75%), SMPTE 16:9(BLACK), SMPTE 16:9(I/Q), BAR 4:3(100%), BAR 4:3(75%), SMPTE 4:3(BLACK), SMPTE 4:3(I/Q), MF-ARIB(75%), MF-ARIB(100%), MF-ARIB(+I), MF-SMPTE(I,Q), MF-SMPTE(75%,Q), MF-SMPTE(100%,Q), MF-SMPTE(+I,Q), HD-CUSTOM, SDI CHECK FIELD, Y-RAMP, Y/C-RAMP, HD-CUSTOM2
Selects the color bar of 4K output/HD output.
SDR-LOOK BAR(100%), SDR-LOOK BAR(75%), HDR BAR, SDI CHECK FIELD, Y-RAMP, Y/C-RAMP
HDR output color bars type
SDR-LOOK BAR(100%): Same appearance as 100% level color bars for SDR when viewed on an HDR-compatible display
SDR-LOOK BAR(75%): Same appearance as 75% level color bars for SDR when viewed on an HDRcompatible display
HDR BAR: Color bars for HDR
MODIFY, EVEN
Sets the stripe width for multi-format color bar output.
MODIFY: Stripe width adjusted to prevent colors mixing when 4:3 Edge crop.
EVEN: Stripe width in accordance with standard.
WIDE, NARROW
Sets the color difference signal band of the color bar. WIDE: Band not limited.
NARROW: Band is limited to prevent ringing.
4K/HD BAR, SD BAR
Selects the color bar signal source for output to SD.
4K/HD BAR: Down converts the 4K/HD color bars and then outputs it.
SD BAR: Outputs the SD color bars selected in SELECT.
SYSTEM OPERATION menu t <MULTI FORMAT> page t When 1.001(525) is selected for SYSTEM: SMPTE, EIA, FULL, 95%, NTSC100%, Y/C-RAMP, Y-RAMP
Selects the SD color bar.
SYSTEM OPERATION menu t <MULTI FORMAT> page t When 1.000(625) is selected for SYSTEM: SMPTE, EIA, FULL, 95%, PAL100%, Y/C-RAMP, Y-RAMP
ON, OFF
Sets the character superimposition on the color bar signal.
ON, OFF
Sets moving symbol on the color bar screen.
0, 1, 2
Selects the symbol type.
SMALL, LARGE
Selects the symbol size.
OFF, ON
Sets diamond mark superimposition on the color bar for 4K 2 sample interleave output.
See "4K 2SI diamond marker" (page 50).
47
VIDEO/MONITOR
Page name Page No.
<COLOR BAR> V01
Item
HFR CHANNEL MARK
Set value OFF, ON
<BAR CHARACTER> V02
BAR CHARACTER CLEAR ALL
<DOWNCONVERT> V03
4K-HD DOWNCONVERT FILTER
SD ASPECT
<HFR PAINT OFFSET> V04
NTSC SETUP DETAIL LEVEL
1, 2, 3, 4, 1(V:0.3), 1(V:0.6)
SQUEEZE, EDGE CROP, LETTER BOX 7.5, 0 IRE 99 to 99 0
DETAIL CRISP
99 to 99 0
<MONITOR> V05
CHARACTER LEVEL 1, 2, 3, 4, 5
LEVEL GATE
OFF, 1&2, 1, 2, (---)
Y-LEVEL1 MIN 0 to 108% 49
MAX 0 to 108% 61
LEVEL 99 to 99 25
Y-LEVEL2 MIN 0 to 108% 74
MAX 0 to 108% 108
LEVEL 99 to 99 25
GATE MARKER
OFF, ON, (---)
LEVEL
99 to 99 0
Description
Sets channel identification mark superimposition on HD HFR output video. See "HFR channel marker" (page 50).
Sets the character string to be displayed on each of lines 1 to 16.
Clears all the character strings set for BAR CHARACTER.
Selects the type of filter for downconverting from 4K video signals to HD signals.
Selects the aspect for SD output.
Sets the NTSC signal setup level.
Sets the offset amount of DETAIL LEVEL to be added to HD HFR video. DETAIL LEVEL is the standard for HD normal speed that is set from the MSU/RCP. 0 is the same as HD normal speed.
Sets the offset amount of DETAIL CRISP to be added to HD HFR video. DETAIL CRISP is the standard for HD normal speed that is set from the MSU/RCP. 0 is the same as HD normal speed.
Sets the brightness of text in menus, etc.
Sets level gate display. OFF: Level gate is not displayed. 1: Displays level gate 1. 2: Displays level gate 2. 1&2: Displays level gate 1 & 2. (---): Displayed when a camera is not connected. (Display only)
Sets the minimum detection levels for level gate 1 display.
Sets the maximum detection levels for level gate 1 display.
Sets the zebra display level to be added to the detection area.
Sets the minimum detection levels for level gate 2 display.
Sets the maximum detection levels for level gate 2 display.
Sets the zebra display level to be added to the detection area.
Sets the display of the gate signal detected by the camera. OFF: Gate signal is not displayed. ON: Displays zebra in the area (skin gate, etc.) detected by the camera. (---): Displayed when a camera is not connected. (Display only)
Sets the zebra display level to be added to the detection area.
48
VIDEO/MONITOR Page name Page No. <MONITOR> V05
<SPIRIT LEVEL> V06
<DISPLAY> V07 Sets the items to be displayed on the camera setting status page of the status display screen.
Item
Set value
ASPECT MARKER SELECT
MODULATION ON/OFF MODULATION LEVEL INDICATOR
OFF, ON 4:3, 13:9, 14:9, EU VISTA, VISTA, CINEMA, FOLLOW DC OFF, ON
99 to 99 0
OFF, ON, ---
REVERSE H POSITION V POSITION MESSAGE
OFF, ON 0 to 99, 50 0 to 99, 50 ALL, WARNING, OFF
CHU MODE LENS FILE MASTER GAIN
MODE
ON, OFF ON, OFF ON, OFF STEP GAIN, MASTER WHITE, F DROP GAIN, TOTAL GAIN
MASTER WHITE IND ON, OFF
SHUTTER
ON, OFF
ND FILTER CC FILTER IRIS EXTENDER
ON, OFF ON, OFF ON, OFF ON, OFF
F DROP MIC
ON, OFF ON, OFF
Description
Sets aspect marker display. Selects the marker type.
Sets the mask function for outside the marker frame.
Sets the mask level.
Sets spirit level display. This can be set when connected with a camera which has a lens that supports serial communication attached. Selects the indicator move direction for tilting. Spirit level display position (horizontal) Spirit level display position (vertical) Sets the display of messages for the camera auto setup operation status, warnings that occur in the system, etc. ALL: Displays all messages. WARNING: Displays system warning messages and menu control messages. OFF: Displays only menu control messages. Displays or hides the CHU MODE. Displays or hides the LENS FILE name. Displays or hides the master gain setting value. Switches the MASTER GAIN display mode. STEP GAIN: Displays the STEP GAIN value. MASTER WHITE: Displays the MASTER WHITE GAIN value. F DROP GAIN: Displays the F DROP GAIN value. TOTAL GAIN: Displays the total value of the STEP GAIN, MASTER GAIN, and F DROP GAIN values combined. Displays or hides the enabled status of the master white gain. Displays or hides the shutter speed/ECS frequency setting value. Displays or hides the ND filter type. Displays or hides the CC filter type. Displays or hides the iris status. Displays or hides the lens extender/digital extender status. Display or hides the F-drop status. Displays or hides the camera microphone switch status.
49
4K 2SI diamond marker
This function is for displaying a test pattern like the following in the area at the bottom right of the 4K color bar during 4K 2 sample interleave output. OK is displayed if the connections for Links 1 to 4 are correct, and OK is not displayed if they are incorrect. This function can be used to check the connections.
Correct connections
HFR channel marker
This function is for displaying a marker in the video area of HD HFR output.
The number of squares indicates the channel number so you can easily identify the channel number of a multi-link interface.
Example: Indication for channel 4
When Link 1 and Link 2 have been swapped
AUDIO/INTERCOM menu
AUDIO/INTERCOM
Page name Page No.
<MIC GAIN> A01
Item
CAM MIC GAIN CH1 CH2
<AUDIO OUT> A02
DELAY ANALOG OUT
CH1 LEVEL ADJUST
CH2 LEVEL ADJUST
Set value
Description
Sets the camera microphone gain.
(---), 20, 30, 40, 50, 60 dB
Set according to the microphone used.
(---), 20, 30, 40, 50, 60 dB
(---): Displayed when a camera is not connected. (Display only)
0, 5, 11, 16, 21, 27, 32, 37, 43, 48, Sets the camera microphone output phase. 53, 59, 64, 69, 75, 80 ms
MIC1/2, AES/EBU
Selects the MIC OUT ANALOG output.
MIC1/2: Outputs the camera MIC1/2 input from the MIC OUT connector of the CCU.
AES/EBU: Outputs the camera AES/EBU input from the MIC OUT connector of the CCU.
20, 0, +4 dBu
Sets the AUDIO CH1 output level.
99 to 99 0
20, 0, +4 dBu
Sets the AUDIO CH2 output level.
99 to 99 0
50
AUDIO/INTERCOM Page name Page No. <INTERCOM> A03
<FRONT INTERCOM> A04
Item
Set value
Description
INTERCOM CH PRODUCER INTERFACE
SIDETONE CANCEL TERMINATION
ENGINEER INTERFACE
SIDETONE CANCEL TERMINATION
PGM1 INPUT PGM2 INPUT MIC/PGM I/F PRIVATE SW
INTERCOM MIC
INTERCOM MIC TYPE
INTERCOM MIC GAIN SIDE TONE LEVEL PGM MIX MODE
PGM SEL PGM1 LEVEL PGM2 LEVEL
1CH(PROD), 2CH(PROD&ENG) CLEAR COM, 4WIRE, RTS
Selects the intercom channel number to be used. Sets the producer line intercom system.
99 to 99 0 OFF, ON
CLEAR COM, 4WIRE, RTS
Sets the side tone cancel level. (Setting is possible when CLEAR COM or RTS is selected)
Sets termination resistance (200 ohms). (Setting is possible when CLEAR COM or RTS is selected) OFF: Displayed when 4WIRE is selected in SYSTEM I/F. (Display only)
Sets the engineer line intercom system.
99 to 99 0 OFF, ON
20, 0, +4 dBu 20, 0, +4 dBu (PGM ON), (MIC OFF), (MIC ON) (PROD), (ENG), (PRIV) ENABLE, DISABLE(SET TO ENG), DISABLE(SET TO PROD)
DYNAMIC, ECM, CARBON
BALANCED, UNBALANCED
6, 0, +6 dB
Sets the side tone cancel level. (Setting is possible when CLEAR COM or RTS is selected)
Sets termination resistance (200 ohms). (Setting is possible when CLEAR COM or RTS is selected) OFF: Displayed when 4WIRE is selected in SYSTEM I/F. (Display only)
Sets the PGM1 input level of D-sub connector on rear panel.
Sets the PGM2 input level of D-sub connector on rear panel.
Front panel MIC/PGM switch position (Display only)
Front panel INTERCOM operation status (Display only)
Operation when the INTERCOM switch on the front panel is set to the PRIV position. ENABLE: Private operation DISABLE(SET TO ENG): Same function as ENG position. DISABLE(SET TO PROD): Same function as PROD position.
Sets the headset microphone connected to the INTERCOM connector on the front panel. CARBON: Carbon microphone (power supply, 20 dB gain) ECM: Electret condenser microphone (power supply, 40 dB gain) DYNAMIC: Dynamic microphone (no power supply, 60 dB gain)
Sets the headset microphone connected to the INTERCOM connector on the front panel. BALANCED: Balanced microphone UNBALANCED: Unbalanced microphone
Sets the microphone input gain.
0 to 99, 50 OFF, INCOM+PGM, L-INCOM/ R-PGM
PGM1, PGM2, PGM1+PGM2
0 to 99, 50 0 to 99, 50
Sets the side tone level.
OFF: Signals are not mixed. INCOM+PGM: INCOM and PGM signals are mixed. L-INCOM/R-PGM: Outputs INCOM signal through the left channel and PGM signal through the right.
Selects the PGM audio output from the FRONT INTERCOM connector.
Sets the MIX level of PGM1.
Sets the MIX level of PGM2.
51
AUDIO/INTERCOM Page name Page No. <IP AUDIO> A05 (When HKCU-4001 is installed)
<IP INTERCOM> A06 (When HKCU-4001 is installed)
Item AUDIO OUT
FORMAT
CH ORDER PGM IN
FORMAT
CH ORDER INTERCOM OUT
FORMAT
CH ORDER INTERCOM IN
FORMAT
CH ORDER
Set value
CLEAR COM, 4WIRE, RTS
L24/48kHz/1ms/2ch, L24/48kHz/1ms/4ch, L24/48kHz/1ms/8ch, L24/48kHz/0.125ms/2ch, L24/48kHz/0.125ms/4ch, L24/48kHz/0.125ms/8ch, L24/48kHz/0.125ms/16ch
MIC1, MIC2, AES/EBU1, AES/EBU2
L24/48kHz/1ms/2ch, L24/48kHz/1ms/4ch, L24/48kHz/1ms/8ch, L24/48kHz/0.125ms/2ch, L24/48kHz/0.125ms/4ch, L24/48kHz/0.125ms/8ch, L24/48kHz/0.125ms/16ch
PGM1, PGM2
L24/48kHz/1ms/2ch, L24/48kHz/1ms/4ch, L24/48kHz/1ms/8ch, L24/48kHz/0.125ms/2ch, L24/48kHz/0.125ms/4ch, L24/48kHz/0.125ms/8ch, L24/48kHz/0.125ms/16ch
ENG, PROD
L24/48kHz/1ms/2ch, L24/48kHz/1ms/4ch, L24/48kHz/1ms/8ch, L24/48kHz/0.125ms/2ch, L24/48kHz/0.125ms/4ch, L24/48kHz/0.125ms/8ch, L24/48kHz/0.125ms/16ch
ENG, PROD
Description Sets the producer line intercom system. Sets the audio format.
Displays the channel order. Sets the audio format.
Displays the channel order. Sets the audio format.
Displays the channel order. Sets the audio format.
Displays the channel order.
52
MAINTENANCE menu
MAINTENANCE
Page name Page No.
<I/F SETTINGS> M01
Item SLOT3 (SDI I/O)
Set value
Top (SDI I/O 1) SLOT3-1 OUT, SDI IN3/HD PROMPTER IN Bottom (SDI I/O 2) SLOT3-2 OUT, HD TRUNK OUT, SDI IN4
CHARACTER/SYNC CHARACTER, SYNC OUT
MIC/WF REMOTE MIC REMOTE, WF REMOTE
REAR PREVIEW
MOMENTARY, TOGGLE
<TRUNK/PROMPTER1> M02
<TRUNK/PROMPTER2> M03
TRUNK LINE
CHANNEL MODE 2CH(MAX 75Kbps), 1CH(MAX 150Kbps)
INTERFACE
232C, 422A
PROMPTER
CHANNEL MODE 2CH, 1CH
NETWORK TRUNK
MODE
OFF, NETWORK, NETWORK+VIDEO
DATA RATE HD PROMPTER
100Mbps, 1Gbps (ENABLED), (DISABLED)
SOURCE HD TRUNK
SDIIN3, IP RET2 (ENABLED), (DISABLED)
Description
Sets the functions to assign to the SLOT3 (SDI I/O) connectors. The top one is the SDI I/O 1 connector setting. The bottom one is the SDI I/O 2 connector setting. SLOT3-1, SLOT3-2 OUT: Used as the SLOT3-1 and SLOT3 outputs. HD TRUNK OUT: Used as the HD-TRUNK output. SDI IN3/HD PROMPTER IN: Used as SDI IN3 input and HD-PROMPTER input connectors. SDI IN4: Used as SDI IN4 input connector.
Note
When set to SDI I/O1&HD-PROMPTER IN, the return video of camera with INPUT set to SDI I/O1 is the same video as the HD PROMPTER output. Sets the function to assign to the CHARACTER/ SYNC OUT connector. CHARACTER: Set to VBS (CHARACTER superimposition) output. SYNC: Set to SYNC OUT output. Displayed only when a D-sub 50-pin board is installed. Sets the operation mode of REAR PREVIEW connector output.
Sets the number of channels to be used.
Sets the communication line mode.
Sets the number of prompter lines.
Sets the mode for the network trunk. OFF: Network TRUNK is not used. NETWORK: Network TRUNK is used (maximum 1 Gbps) NETWORK+VIDEO: Network TRUNK is used at the same time as HD TRUNK/HD PROMPTER (maximum 100 Mbps) Displays the data transfer rate. (Display only) Displays the enable/disable state of HD PROMPTER. (Display only)
Note
HD PROMPTER operation varies according to the NETWORK TRUNK >MODE setting. OFF: HD PROMPTER can be used. NETWORK: HD PROMPTER cannot be used. NETWORK+VIDEO: HD PROMPTER can be used, but audio is not embedded. HD PROMPTER signal select Displays the enable/disable state of HD TRUNK. (Display only)
53
MAINTENANCE
Page name Page No.
<MENU SETTINGS> M04
Item PAGE RESUME ALARM JUMP RE DIRECTION
CATEGORY
Set value ON, OFF ON, OFF
STD, RVS
PAGE
STD, RVS
ITEM
STD, RVS
DATA
STD, RVS
CAMERA MENU CTRL
OFF, ON
<DATE&TIME> M05
<TALLY INPUT> M06
<ALARM SETTINGS> M07
DATE (YEAR) DATE (MONTH) DATE (DAY) TIME (HOUR) TIME (MINUTE) TIME ZONE (HOUR) TIME ZONE (MINUTE) R-TALLY
G-TALLY
Y-TALLY
FORCE LEGACY
15 to 99 1 to 12 1 to 31 0 to 23 0 to 59 23 to +23, 0 0 to 59
CONTACT, POWER(24V), POWER(TTL) CONTACT, POWER(24V), POWER(TTL) CONTACT, POWER(24V), POWER(TTL) OFF, ON
CABLE OPEN GENLOCK ERROR
OFF, ON OFF, ON
<SDI ANCILLARY DATA> VIDEO PAYLOAD ID LATEST, 2002, 2010, 2011
M08
EMBED AUDIO
OFF, ON
EMBED META DATA OFF, ON
Description
Turns the menu mode resume page display function on/off. Turns the error-related page display function on/off for when an error occurs while in menu mode.
STD: CONTROL knob clockwise rotation moves the CCU MENU pointer (,) down. RVS: CONTROL knob counterclockwise rotation moves the CCU MENU pointer (,) down. STD: CONTROL knob clockwise rotation displays the next page in the menu. RVS: CONTROL knob counterclockwise rotation displays the next page in the menu. STD: CONTROL knob clockwise rotation moves the pointer (,) down to the next item on the page. RVS: CONTROL knob counterclockwise rotation moves the pointer (,) down to the next item on the page. STD: CONTROL knob clockwise rotation selects the next data option. RVS: CONTROL knob counterclockwise rotation selects the next data option. Displays the camera menu.
Notes
· If CAM MENU is set to ON, CCU menu operations cannot be performed because only camera menu operations are available.
· The camera menu is not displayed when SD signal is output.
Sets the date and time.
Sets the time zone.
RED tally input setting
GREEN tally input setting
YELLOW tally input setting
Set to OFF to not display the FORCE LEGACY alarm. Set to OFF to not display the CABLE OPEN alarm. Set to OFF to not display the GENLOCK ERROR alarm. Selects the standard year of the payload ID to be added to the video output of SLOT2 and SLOT3. Sets whether to embed audio in the SDI output. Sets whether there is metadata superimposition for SLOT2 and SLOT3 output.
54
MAINTENANCE Page name Page No. <SWITCH ASSIGN> M09
<OPTION KEY> M10 <OTHERS> M11
Item
Set value
Description
ASSIGNABLE SWITCH
READ INSTALLED OPTIONS LASER DIODE ON BACKUP RETURN VF
NONE, BARS, CAM POWER, FORCE LEGACY, LASER DIODE ON
Execute with ENTER.
Sets the function to be assigned to the assignable button on the front panel. NONE: No assignment. BARS: Sets the color bar output to ON/OFF. CAM POWER: Sets camera power to ON/OFF. FORCE LEGACY: Forces the communication mode to LEGACY mode. LASER DIODE ON: Turns the optical signal output from the CCU to the camera ON/OFF.
Reads the installation key from the USB flash drive.
List of installed options. (Display only)
ENABLE, DISABLE NORMAL, HFR LINK
Sets whether to save the state of the LASER DIODE setting on the <CAMERA I/F> page of the SYSTEM OPERATION menu for the next startup.
Sets the VF return signal to the camera.
NORMAL: Normal-speed signal
HFR LINK: HFR signal 1LINK (steady image can be used as the image to display in the viewfinder)
NETWORK menu
NETWORK Page name Page No. <IP ADDRESS> N01
<CNS SETTINGS> N02
<TSL UMD> N03
Item
Set value
Description
IP ADDRESS
0.0.0.0 to 255.255.255.255
SUBNET MASK
0.0.0.0 to 255.255.255.255
DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255
MAC ADDRESS
(xx:xx:xx:xx:xx:xx)
CNS MODE
LEGACY, BRIDGE, MCS
MCS MODE
CLIENT
CCU NO
MASTER IP ADDRESS TSL UMD PORT
When MCS is selected in CNS MODE: Blank, 1 to 96 When LEGACY or BRIDGE is selected in CNS MODE: Blank, 1 to 96, A to Z 0.0.0.0 to 255.255.255.255
DISABLE, ENABLE LAN-COM
PORT NUMBER PACKET STATUS
8900 NOT RECEIVED, RECEIVED
Sets the IP address. Sets the subnet mask. Sets the default gateway. Displays the MAC address of the unit. Sets the communication mode. Indicates that the unit is the client when MCS mode is selected. (Display only) Sets the CCU number.
Sets the master device IP address for MCS mode.
Enables/disables IP Tally using TSL UMD V5.0. Displays the LAN port being used (Fixed to LANCOM). UDP port number for TSL UMD connection Displays the TSL UMD packet reception status. When received, it also displays IDs and the on/off status of the red, green, and yellow tallies. Up to five IDs can be displayed. "AND MORE" is displayed if there are more.
55
NETWORK Page name Page No. <NETWORKED MEDIA INTERFACE> N04 (When HKCU-IP43F is installed)
<IP ADDRESS 2> N04 (When HKCU-4001 is installed)
Item
Set value
Description
NETWORK INTERFACE
DHCP
IP ADDRESS
NMI LAN1, NMI LAN2
OFF, ON 0.0.0.0 to 255.255.255.255
SUBNET MASK 0.0.0.0 to 255.255.255.255
DEFAULT GATEWAY
0.0.0.0 to 255.255.255.255
MAC ADDRESS PORT
00:00:00:00:00:00 to FF:FF:FF:FF:FF:FF
LAN1, LAN2
Selects the network interface to configure/display.
Enables or disables DHCP.
When DHCP enabled: Displays the IP address assigned using DHCP for the selected network interface. When DHCP disabled: Displays the IP address setting for the selected network interface.
When DHCP enabled: Displays the subnet mask set using DHCP for the selected network interface. When DHCP disabled: Displays the subnet mask setting for the selected network interface.
When DHCP enabled: Displays the default gateway IP address set using DHCP for the selected network interface. When DHCP disabled: Sets and displays the default gateway IP address for the selected network interface.
Specified MAC address of the selected network interface (Display only)
Selects the port of the HKCU-4001 for setting the IP address.
DHCP
IP ADDRESS SUBNET MASK
OFF
0.0.0.0 to 255.255.255.255 0.0.0.0 to 255.255.255.255
Sets DHCP operation. Fixed to OFF in the current version.
Sets the IP address.
Sets the subnet mask.
DEFAULT GATEWAY 0.0.0.0 to 255.255.255.255
MAC ADDRESS
00:00:00:00:00:00
Sets the default gateway.
Displays the MAC address of the LAN interface selected using PORT.
LINK SPEED 25G FEC
10G, 25G, -----
Displays the link speed.
NONE, RS-FEC (CL108), FC-FEC Sets the FEC mode for 25G. (CL74)
Note
Set to the port setting of the IP switch to be connected.
56
NETWORK
Page name Page No.
Item
<NETWORK GENLOCK> PORT
N05
(When HKCU-4001 is installed)
NETWORK GENLOCK
PROFILE
DOMAIN NUMBER
Set value LAN1, LAN2 DISABLE, ENABLE ST2059-2 0 to 127, 127
COMMUNICATION MULTICAST MODE, MIXED
MODE
MODE
DELAY REQUEST INTERVAL
PTP MASTER INFO
IP ADDRESS
7 to 1 0.0.0.0 to 255.255.255.255
SYNC INTERVAL 7 to 1
PRIORITY 1 PRIORITY 2 STEP
0 to 255 0 to 255 ONE-STEP, TWO-STEP
LOCK STATUS
NOT IN USE, NO MASTER, LOCKING, LOCKED
<PTP STATUS> N06 (When HKCU-4001 is installed)
PTP PORT
PORT SEL Time GMClockID MasterID Sync FollowUp DelayReq DelayResp
Network Status
Delay Jitter
LAN1, LAN2 LAN1, LAN2
NOT GOOD, GOOD, VERY GOOD
Description
Selects the port of the HKCU-4001 for setting NETWORK GENLOCK. Enables/disables network genlock for the selected port. Displays the supported profile. Only ST2059-2 profile is supported. Sets the domain number.
Note
Set to the domain number of the master device to be connected. MULTICAST MODE: Multicast reply to the master. MIXED MODE: Unicast reply to the master. Displays the delay of the response to the PTP master.
Displays information obtained from the PTP master. Displays the IP address of the currently synchronized PTP master device. Displays the Sync Interval setting of the master device. Displays the priority of the PTP master. The lower the number, the higher the priority.
Displays the mode in which the timestamp is sent. ONE-STEP: Sent in Sync message. TWO-STEP: Sent in Follow-up message. Displays the PTP operation status. NOT IN USE: PTP operation stopped NO MASTER: PTP master is not found. LOCKING: Synchronizing LOCKED: Synchronized Displays the port on which PTP is running, and the status. Selects the port for which to display the status. Displays the PTP master time. Grand master clock ID Master clock ID Sync message rate Follow-up message rate Delay request message rate Delay response message rate Displays the network status.
Displays the network delay. Displays the network jitter.
57
NETWORK
Page name Page No.
<IP LIVE>
N05 (When HKCU-IP43F is installed)
N07 (When HKCU-4001 is installed)
Item
Set value
Description
IP LIVE SYSTEM MANAGER
PORT
The settings vary depending on the installed option.
When HKCU-IP43F is installed: LAN1, LAN1&LAN2
When HKCU-4001 is installed: DISABLE, LAN1&LAN2
Sets IP Live System Manager (LSM). DISABLE: Does not communicate with LSM. LAN1: Communicates with LSM using LAN1 only. LAN1&LAN2: Communicates with LSM using LAN1 and LAN2 (redundancy).
Note
Restart the unit after changing the PORT setting.
DHCP
The settings vary depending on the installed option.
When HKCU-IP43F is installed: OFF, ON
When HKCU-4001 is installed: OFF (fixed)
When HKCU-IP43F is installed Sets whether to set the LSM IP address using DHCP or to set it manually. ON: Sets the LSM IP address using DHCP. OFF: Sets the LSM IP address manually. Set to OFF (fixed) when DHCP is set to OFF on the NETWORKED MEDIA INTERFACE page. When HKCU-4001 is installed
OFF (fixed)
PRIMARY IP ADDRESS
0.0.0.0 to 255.255.255.255
Sets the IP address of LSM1.
SECONDARY IP 0.0.0.0 to 255.255.255.255 ADDRESS
Sets the IP address of LSM2.
PRIMARY CONNECTION STATUS
DISCONNECTED, CONNECTING, CONNECTED
Displays the status of the connection with LSM1. DISCONNECTED: Disconnected. CONNECTING: Establishing communication.
CONNECTED: Communication established.
SECONDARY CONNECTION STATUS
DISCONNECTED, CONNECTING, CONNECTED
Displays the status of the connection with LSM2. DISCONNECTED: Disconnected. CONNECTING: Establishing communication.
CONNECTED: Communication established.
MULTICAST ADDRESS
(When HKCU-4001 is installed)
AUTO, MANUAL
Switches the mode of the multicast address setting of the IP stream.
AUTO: When PORT is set to LAN1&LAN2, this option is fixed to AUTO, and multicast addresses specified by the LSM are used.
MANUAL: When PORT is set to DISABLE, this option is fixed to MANUAL, and the multicast addresses are set manually on the MULTICAST ADDRESS 1 to 5 pages.
HITLESS FAILOVER ON, OFF
Sets whether to use IP stream redundancy.
(When HKCU-4001 is installed)
ON: Use redundancy. OFF: Do not use redundancy.
ST 2110 4K
ENABLE, DISABLE
Enables/disables ST2110 4K stream input/output.
When the LAN1 or LAN2 link speed is 10G, this is set to DISABLE (fixed).
SAP ANNOUNCE
ON, OFF
SAP notifications on/off setting
58
NETWORK Page name Page No. <MULTICAST ADDRESS 1> N08 (When HKCU-4001 is installed)
<MULTICAST ADDRESS 2> N09 (When HKCU-4001 is installed)
<MULTICAST ADDRESS 3> N10 (When HKCU-4001 is installed)
Item
Set value
Description
MULTICAST ADDRESS VIDEO OUT(4K) LAN1-1
IP ADDRESS
PORT VIDEO OUT(4K) LAN1-2 VIDEO OUT(HD) LAN1-1 VIDEO OUT(HD) LAN1-2 VIDEO OUT(HD) LAN1-3 VIDEO OUT(HD) LAN2-1 VIDEO OUT(HD) LAN2-2 VIDEO OUT(HD) LAN2-3 MULTICAST ADDRESS RETURN LAN1-1
IP ADDRESS
PORT SRC IP RETURN LAN1-2 RETURN LAN2-1 RETURN LAN2-2 MULTICAST ADDRESS AUDIO OUT LAN1 IP ADDRESS
PORT AUDIO OUT LAN2 PGM IN LAN1
IP ADDRESS
PORT SRC IP PGM IN LAN2
AUTO, MANUAL
Displays the mode of the multicast address setting of the IP stream.
Settings for the IP 4K OUT1 output video signal
224.0.0.1 to 239.255.255.255, 0.0.0.0
Sets the transmit destination multicast IP address.
100 to 65535, 30000
Sets the transmit destination port number.
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP 4K OUT2 output video signal
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP HD OUT1 output video signal (LAN1)
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP HD OUT2 output video signal (LAN1)
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP HD OUT3 output video signal (LAN1)
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP HD OUT1 output video signal (LAN2)
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP HD OUT2 output video signal (LAN2)
Same as VIDEO OUT(4K) LAN1-1 Settings for the IP HD OUT3 output video signal (LAN2)
AUTO, MANUAL
Displays the MULTICAST ADDRESS setting of the <IP LIVE> page.
Settings for the IP RET1 input video signal (LAN1)
224.0.0.1 to 239.255.255.255, 0.0.0.0
Sets the receive destination multicast IP address.
100 to 65535, 30000
Sets the receive destination port number.
0.0.0.0 to 255.255.255.255
Sets the stream transmit source IP address.
Same as RETURN LAN1-1
Settings for the IP RET2 input video signal (LAN1)
Same as RETURN LAN1-1
Settings for the IP RET1 input video signal (LAN2)
Same as RETURN LAN1-1
Settings for the IP RET2 input video signal (LAN2)
AUTO, MANUAL
Displays the MULTICAST ADDRESS setting of the <IP LIVE> page.
Settings for the IP AUDIO OUT output (LAN1)
224.0.0.1 to 239.255.255.255, 0.0.0.0
Sets the transmit destination multicast IP address.
100 to 65535, 30000
Sets the transmit destination port number.
Same as AUDIO OUT LAN1
Settings for the IP AUDIO OUT output (LAN2)
Settings for the IP PGM input signal (LAN1)
224.0.0.1 to 239.255.255.255, 0.0.0.0
Sets the receive destination multicast IP address.
100 to 65535, 30000
Sets the receive destination port number.
0.0.0.0 to 255.255.255.255
Sets the stream transmit source IP address.
Same as PGM IN LAN1
Settings for the IP PGM input signal (LAN2)
59
NETWORK Page name Page No. <MULTICAST ADDRESS 4> N11 (When HKCU-4001 is installed)
<MULTICAST ADDRESS 5> N12 (When HKCU-4001 is installed)
<PING> N04 N06 (When HKCU-IP43F is installed) N13 (When HKCU-4001 is installed)
Item
Set value
Description
MULTICAST ADDRESS INTERCOM OUT LAN1
IP ADDRESS
PORT INTERCOM OUT LAN2 INTERCOM IN LAN1
IP ADDRESS
PORT SRC IP INTERCOM IN LAN2 MULTICAST ADDRESS META OUT LAN1-1
AUTO, MANUAL
224.0.0.1 to 239.255.255.255, 0.0.0.0 100 to 65535, 30000 Same as INTERCOM OUT LAN1
224.0.0.1 to 239.255.255.255, 0.0.0.0 100 to 65535, 30000 0.0.0.0 to 255.255.255.255 Same as INTERCOM IN LAN1 AUTO, MANUAL
IP ADDRESS
PORT META OUT LAN1-2
224.0.0.1 to 239.255.255.255, 0.0.0.0
100 to 65535, 30000
Same as META OUT LAN1-1
META OUT LAN1-3 Same as META OUT LAN1-1
META OUT LAN2-1 Same as META OUT LAN1-1
META OUT LAN2-2 Same as META OUT LAN1-1
META OUT LAN2-3 Same as META OUT LAN1-1
PORT
IP ADDRESS
PING
STATISTICS
TRANSMITTED PACKETS
RECEIVED PACKETS
PACKET LOSS
ROUND-TRIP MIN
ROUND-TRIP AVERAGE
LAN-COM, LAN1, LAN2 0.0.0.0 to 255.255.255.255 EXEC
0 to 5 [packets]
0 to 5 [packets]
0 to 100 [%] 0.0 to 1000000.0 [ms]
0.0 to 1000000.0 [ms]
Displays the MULTICAST ADDRESS setting of the <IP LIVE> page. Settings for the IP INTERCOM output (LAN1)
Sets the transmit destination multicast IP address.
Sets the transmit destination port number. Settings for the IP INTERCOM output (LAN2)
Settings for the IP INTERCOM input (LAN1) Sets the receive destination multicast IP address.
Sets the receive destination port number. Sets the stream transmit source IP address. Settings for the IP INTERCOM input (LAN2) Displays the mode of the multicast address setting of the IP stream. Settings for metadata for the IP OUT1 video signal (LAN1) Sets the transmit destination multicast IP address.
Sets the transmit destination port number. Settings for metadata for the IP OUT2 video signal (LAN1) Settings for metadata for the IP OUT3 video signal (LAN1) Settings for metadata for the IP OUT1 video signal (LAN2) Settings for metadata for the IP OUT2 video signal (LAN2) Settings for metadata for the IP OUT3 video signal (LAN2) Sets the Ping transmit port. Sets the IP address of the Ping transmit destination. Sends a Ping. Displays the Ping execution result. Number of transmitted packets.
Number of received packets.
Packet loss rate. Minimum round trip delay time in milliseconds.
Average round trip delay time in milliseconds.
60
DIAGNOSIS menu
DIAGNOSIS
Page name Page No.
<BOARD STATUS> D01
Item VIF DVP
TX
DPR
NET
HKCU-4001
<SERIAL NUMBER> D02
FAN1 FAN2 CAM POWER SUPPLY HOUR METER MODEL NAME SERIAL NUMBER HKCU-4001
HKCU-IP43F
<VERSION1> D03
APPLICATION OS
UPDATER
MIF
VIF
TX
SY
4K-POST
SDP
<VERSION2> D04
DEC(HDC4300) DPR(NORMAL)
DPR(HCO) DPR(Sub) a)
NET (When HKCU-IP43F is installed)
NMI LSI (When HKCU-IP43F is installed)
NET1 (When HKCU4001 is installed)
NET2 (When HKCU4001 is installed)
<CAMERA DIAGNOSIS> NAME
D05
ROM VERSION
Display
Description
OK, POWER ERROR, PLD ERROR, TEMP WARNING
VIF board self-diagnosis result
OK, POWER ERROR, FAN STOP, DVP board self-diagnosis result PLD ERROR, TEMP WARNING
OK, POWER ERROR, PLD ERROR, TEMP WARNING
TX board self-diagnosis result
OK, POWER ERROR, PLD ERROR, TEMP WARNING
DPR board self-diagnosis result
OK, PLD ERROR
NET board self-diagnosis result (When HKCU-IP43F is installed)
OK, FAN STOP, PLD ERROR, TEMP WARNING
HKCU-4001 IF board and NET board self-diagnosis result
OK, STOP
Power supply unit fan operation status
OK, STOP
Fan operation status
ON, OFF
Status of power supply to camera
Accumulated power-on time Unit model name Serial number Displays the serial number of the HKCU-4001 (When HKCU-4001 is installed) Displays the serial number of the HKCU-IP43F (When HKCU-IP43F is installed) Unit software version Unit software version Unit software version ROM version of MIF PLD (VIF board) ROM version of VIF PLD (VIF board) ROM version of TX PLD (TX board) ROM version of SY PLD (SY board) ROM version of 4K-POST PLD (DVP board) ROM version of SPD PLD (DVP board) ROM version of DEC PLD (DVP board) for HDC4300 connection ROM version of DPR PLD (DPR board) ROM version of DPR PLD (DPR board) for HD CUTOUT ROM version of DPR Sub PLD (DPR board) ROM version of NET PLD
NMI software version
X.XX
ROM version of the PLD installed in the HKCU-4001 ROM version of the PLD installed in the HKCU-4001 Model name of connected camera ROM version of camera
61
DIAGNOSIS
Page name Page No.
Item
<BOARD STATUS(NMI)> D06 (When HKCU-IP43F is installed)
POWER(NET) POWER(CN) NMI1 SFP+
MODULE
TX
RX
NMI2 SFP+ MODULE
TX
RX
<BOARD STATUS(HKCU-4001)>
D06
(When HKCU-4001 is installed)
BOARD S/N IF
FAN1 FAN2 NET NET1
NET2
BOARD S/N
Display
OK, ABSENT OK, FAULT
OK, LOS
OK, ABSENT OK, FAULT
OK, LOS
OK, STOP OK, STOP OK, PLD ERROR, TEMP WARNING OK, PLD ERROR, TEMP WARNING
Description
Displays the SFP+ module status of NMI1. OK: SFP+ module is inserted successfully. ABSENT: SFP+ module is not inserted. OK: Normal FAULT: An error occurred during signal transmission. OK: Normal LOS: Signal could not be received. Displays the SFP+ module status of NM2. OK: SFP+ module is inserted successfully. ABSENT: SFP+ module is not inserted. OK: Normal FAULT: An error occurred during signal transmission. OK: Normal LOS: Signal could not be received. Serial number of the NET board.
Displays the FAN1 status of the IF board. Displays the FAN2 status of the IF board. Displays the SFP+ module status of NMI1. Displays the status of the PLD installed on the NET board. Displays the status of the PLD installed on the NET board. Serial number of the HKCU-4001 board.
a) DPR(Sub) may not be displayed, depending on the lot number of the board loaded in the unit. If this occurs, there is no effect on functionality.
62
Appendix
Precautions
If the unit is suddenly taken from a cold to a warm location, or if ambient temperature suddenly rises, moisture may form on the outer surface of the unit and/or inside of the unit. This is known as condensation. If condensation occurs, turn off the unit and wait until the condensation clears before operating the unit. Operating the unit while condensation is present may damage the unit.
The fan and battery are consumable parts that will need periodic replacement. When operating at room temperature, a normal replacement cycle will be about 5 years. However, this replacement cycle represents only a general guideline and does not imply that the life expectancy of these parts is guaranteed. For details on parts replacement, contact your Sony representative.
The life expectancy of the electrolytic capacitor is about 5 years under normal operating temperatures and normal usage (8 hours per day; 25 days per month). If usage exceeds the above normal usage frequency, the life expectancy may be reduced correspondingly.
Do not push the mesh portion of the front panel with your fingers or sharp objects.
Operating environment
· Avoid high-temperature rooms and near sources of heat. · Do not place in locations with strong electric or magnetic
field. · Dry location with good ventilation. · Avoid locations exposed to sunlight or strong lighting.
Avoid violent impacts
Dropping the unit, or otherwise imparting a violent shock to it, is likely to cause it to malfunction.
Do not cover with cloth
While the unit is in operation, do not cover it with a cloth or other material. This can cause the temperature to rise, leading to a malfunction.
After use
Set the POWER switch to the OFF position.
Care
If the body or panels of the unit become dirty, wipe them with a dry cloth. For severe dirt, use a soft cloth steeped in a small amount of neutral detergent, then wipe dry. Do not use volatile solvents such as alcohol or thinners, as these may damage the finish.
To prevent electromagnetic interference from portable communications devices
The use of portable telephones and other communications devices near this unit can result in malfunctions and interference with audio and video signals. It is recommended that the portable communications devices near this unit be powered off.
Error Messages
When an error is detected in this unit or the camera, the ALARM indicator turns on and an error message is displayed on this unit.
Error message
Description
CCU:GENLOCK ERROR
External reference sync error
CCU:10FIELD-ID ERROR
10Field ID is not detected even though the 10F BB setting is On
CCU:FORCE LEGACY
FORCE LEGACY is set for CNS MODE
CCU:PS FAN STOP
Power supply block FAN error
CCU:PS CABLE SHORT
CAMERA connector optical fiber cable short circuit error
CCU:PS CABLE OPEN
CAMERA connector optical fiber cable open circuit error
CCU:PS RCP POWER SUPPLY Remote control panel
ERROR
(connected to REMOTE
connector) power supply error
CCU:PS TEMP WARNING
Power supply unit temperature error
CCU:DVP FAN STOP
DVP board fan stopped
CCU:OPTICAL CONDITION ERROR
Light sensor level on CCU side dropped
CCU:OPTICAL CONDITION WARNING
CCU:OPTICAL CONDITION CARE
CCU:COMMAND ERROR
Command communication error of camera and remote control panel
CCU:XXX POWER ERROR
Board power supply section error (XXX is the board name)
CCU:XXX PLD ERROR
PLD error (XXX is the PLD name)
CCU:XXX TEMP WARNING
Board temperature error (XXX is the board name)
CCU:OPT NO OPTION
Option key required for when CHU MODE is set to HDC(HD CUTOUT) is not installed.
CCU:PLEASE UPDATE CAMERA SOFTWARE
There is a software version mismatch between the camera and this unit.
CCU:PLD CONFIG ERROR
DPR PLD is not configured for HD CUTOUT when CHU MODE is set to HDC(HD CUTOUT).
63
Specifications
HDCU4300
General
Power requirements 100 V to 240 V AC, 50/60 Hz
Current consumption 4.0 A (max.)
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature 20 °C to +60 °C (4 °F to +140 °F)
Mass
Approx. 10.1 kg (22 lb 4.3 oz)
Dimensions (Unit: mm (inches))
410 (16 1/4)
76.2 (3) 88 (3 1/2)
424 (16 3/4) 465 (18 3/8)
482 (19)
Input/output connectors
CAMERA
Optical fiber connector (1)
INTERCOM/TALLY/ PGM
D-sub 25-pin connector (1)
· INTERCOM (PROD/ENG), 4W: 0 dBu, RTS: 0 dBu, CC: 14 dBu
· PGM, 2 systems, 0 dBu/20 dBu
· TALLY (R, G, Y)
· FLAG
RCP/CNU
8-pin multi-connector (1)
TRUNK
12-pin (1)
LAN
8-pin (1)
NETWORK TRUNK 8-pin (1)
SDI I/O
Input connectors AC IN SDI RET IN
VBS RET IN REFERENCE
PROMPTER Output connectors AUDIO OUT CH1, CH2 VBS MONITOR CHARACTER/SYNC
3G/HD/SD SDI I/O (SLOT3) BNC-type (2) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/ 2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 ohms, 270 Mbps 3G-SDI/HD-SDI/SD-SDI, character signal selectable
100 V to 240 V AC (1)
BNC-type (2) 3G-SDI: SMPTE ST424/425, 2.970 Gbps/ 2.967 Gbps HD-SDI: SMPTE ST292, 1.485 Gbps/ 1.4835 Gbps SD-SDI: SMPTE ST259, 270 Mbps
BNC-type (2), analog signal, 1.0 Vp-p, 75 ohms
BNC-type (2), loop-through output HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 ohms SD: Black burst (NTSC: 0.286 Vp-p, 75 ohms/PAL: 0.3 Vp-p, 75 ohms) or NTSC 10F-BB
BNC-type (2), loop-through output during 1CH mode, terminate internally at 75 ohms during 2CH mode, analog signal, 1.0 Vp-p, 75 ohms
XLR 3-pin, male (2), 0 dBu/20 dBu/ +4 dBu
BNC-type (1), VBS, 1 Vp-p, 75 ohms
BNC-type (1), VBS, 1 Vp-p, 75 ohms HD SYNC: BTA-S001, tri-level sync, 0.6 Vp-p, 75 ohms SD SYNC: composite sync, 0.3 Vp-p, 75 ohms VBS/HD SYNC/SD SYNC selectable
64
SDI OUTPUT
· 3G/HD SDI OUTPUT (SLOT1)
BNC-type (8)
3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/ 2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps
3G-SDI/HD-SDI switchable
· 3G/HD/SD SDI OUTPUT (SLOT2) BNC-type (4) 3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p, 75 ohms, 2.970 Gbps/ 2.967 Gbps HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 ohms, 1.485 Gbps/1.4835 Gbps SD-SDI: SMPTE ST259, 0.8 Vp-p, 75 ohms, 270 Mbps 3G-SDI/HD-SDI/SD-SDI, character signal selectable Supplied accessories Number plates (1 set) Operation guide (1) Operation manual (CD-ROM) (1) Optional accessories United States and Canada: Power cord set (1-551-812-XX) Other areas: Power cord set (1-782-929-XX) United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-640-01) CCA-5-3 Connection Cable (3 meters), CCA-5-10 Connection Cable (10 meters) Maintenance Manual Related devices HDC4300 Color Camera HDC-P43 Multi Purpose Camera RCP-3000/1000 series or later Remote Control Panel MSU-1000 series Master Setup Unit HZC-CSM10 Camera System Management Software SZC-4002/4002M/4002W HFR Software SZC-2001/2001M/2001W HD CUTOUT Software HKCU-IP43F Networked Media Interface Board HKCU-4002 12G-SDI Extension Kit HKCU-4001 ST 2110 Interface Kit
HKCU-IP43F
General
Power consumption 18.2 W
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature 20 °C to +60 °C (4 °F to +140 °F)
Dimensions (w/h/d, excluding protrusions)
Mass
NET board: Approx. 94 × 10 × 227 mm (3 3/4 × 13/32 × 9 inches)
CN board: Approx. 55 × 22 × 136 mm (2 1/4 × 7/8 × 5 3/8 inches)
NET board: Approx. 0.18 kg (6.3 oz)
CN board: Approx. 0.14 kg (4.9 oz)
Output connectors CN board: NMI-LAN SFP+ (2)
10G BASE-** (using SFP+ transceiver module) Supplied accessories 30-pin cable (1) Harnesses (4) Screws (M3 × 8) (5) Installation Guide (1) Related devices OTM-10GSR1 SFP+ transceiver module
HKCU-4001
General
Power consumption 42 W
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature 20 °C to +60 °C (4 °F to +140 °F)
Dimensions (w/h/d, 206 × 58 × 387 mm excluding protrusions) (8 1/8 × 2 3/8 × 15 1/4 inches)
Mass
Approx. 0.7 kg (1 lb 8.7 oz)
I/O connectors
Connectors
SFP+, SFP28
Number of lines
2
Signal type
10GBASE-**, 25GBase-** (depending on SFP+/SFP28 transceiver module)
For information about the supported SFP+ and SFP28 transceiver modules (e.g. OTM-10GSR1), contact your Sony sales or service representative.
Supplied accessories
Flat cable 30-pin (1)
Coaxial cable 30-pin (1)
Coaxial cable 40-pin (1)
Power supply harness (1)
Screws M3×8 (6)
Screws M2.6×5 (2)
Wire saddle (4)
Protective tape (1)
Label (1)
Operating Instructions (1)
Related devices
OTM-10GSR1 SFP+ Transceiver Module
OTM-25GSR1 SFP28 Transceiver Module
65
HKCU-4002
General
Power consumption 3 W
Operating temperature
5 °C to 40 °C (41 °F to 104 °F)
Storage temperature 20 °C to +60 °C (4 °F to +140 °F)
Dimensions (w/h/d, DIF board: 80 × 150 × 24 mm excluding protrusions) (3 1/4 × 6 × 31/32 inches)
Mass
DIF board: Approx. 0.16 kg (5.6 oz)
Output connectors
DIF board: BNC type (2)
12G-SDI: SMPTE ST2082, 0.8 Vp-p, 75 ohms, 11.880 Gbps/11.868 Gbps
6G-SDI: SMPTE ST2081, 0.8 Vp-p, 75 ohms, 5.940 Gbps/5.934 Gbps
12G-SDI/6G-SDI switchable
Supplied accessories
40-pin cable (1)
Harness (2)
Operating Instructions (1)
Design and specifications are subject to change without notice.
Notes
· Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
· SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
· SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.
SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND RESULTING FROM A FAILURE TO IMPLEMENT PROPER SECURITY MEASURES ON TRANSMISSION DEVICES, UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND.
Depending on the operating environment, unauthorized third parties on the network may be able to access the unit. When connecting the unit to the network, be sure to confirm that the network is protected securely.
Open Source Software Licenses
On the basis of license contracts between Sony and the software copyright holders, this product uses open software. To meet the requirements of the software copyright holders, Sony is obligated to inform you of the content of these licenses. For the content of these licenses, see the PDF files in the "License" folder of the supplied CD-ROM.
66
HDCU4300 (SY) 4-589-990-15 (2)
Sony Corporation
© 2016
Acrobat Distiller 7.0.5 (Windows)