Cooler Master Hyper TX3 EVO Installation Guide
Package Contents
Ensure the following components are included in the package. If any part is damaged or missing, please contact the store of purchase.
- Cooler
- Screws (a)
- Screws (b)
- AMD Retention Bracket (A)
- AMD Retention Bracket (B)
- Intel Retention Bracket (A)
- Intel Retention Bracket (B)
- Fan bracket
- Thermal paste
- Rubber pads
- Rubber seals
Installation Procedure
Before installation, please select the appropriate installation procedure for your CPU specifications.
Step 1: Prepare the Cooler
- Tighten the retention bracket onto the cooler.
- Remove the protective plastic from the base of the cooler.
- Apply thermal paste to the base surface of the cooler.
Step 2: Install Retention Brackets
Install the retention brackets according to the illustration.
- For Intel: Align and secure the Intel retention brackets.
- For AMD: Align and secure the AMD retention brackets.
Step 3: Mount the Cooler
- Simultaneously push each pair of locking pins.
- Push down until the plate locks into place.
Step 4: Install the Fan
- Attach the fan bracket to the fan.
- Mount the fan onto the cooler.
- If needed, you can install a second fan onto the cooler.
- Connect the power cable.
Important Notes
- Illustrations are for reference only.
- Information in this document is subject to change without prior notice.
Contact Information
Asia Pacific
Cooler Master Technology Inc.
8F., No. 788-1, Zhongzheng Rd., Zhonghe Dist., New Taipei City 23586, Taiwan (R.O.C.).
Tel: +886-2-2225-3517
China
Cooler Master China
Room 2062, Floor 6, No. 421, Weiqing Rd., Jinshan District, Shanghai City, China
Tel: +86-21-51872177
Europe
Cooler Master Europe B.V.
Lodewijkstraat 1b, 5652AC Eindhoven, The Netherlands
Tel: +31-(0)40-702-0900
North America
Cooler Master NA
2929 E Imperial Highway, Ste 110 Brea CA, 92821, USA
Tel: +1-888-624-5099
