Lenovo - X7 - Écouteurs Bluetooth - Conduction Bone - BT 5.3 - Wit/ Oranje | bol
74()* 92 m m
thinkplus
thinkplus Bone conducition Headphone
Manual
Please read the instruction manual before use
(1) (2) (3) (4) (5) (6)
1.x1
thinkplus
3.x1
2.x1
Lenovo X7 ABS+PC V5.3 150mAh 5V 150mA 2 10 0.75W (
1. 21 42
2S
4S
2. () "thinkplus-X7"
thinkplus X7
: :
5V
5V
: : : : : /: :
/:
2S 4S 2S 1S
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB) (PBDE)
SJ/T11364 O: GB/T26572 X: GB26572 "X",
SJ/T11364 *:,
,
:
: :(12 "" ; ; 30 ; 13
1. ; 2.; 3.; 4.() 5. 6. 7.; 8.; 9.;
10. 11. ,
:frank@szeysan.cn :400-812-0102
"
""
"
()
2023()
Product usage profile
(1) Do not try to disassemble or replace the products except for the operation methods specified in the instructions Any part. (2) Do not put the product into water or any other liquid, this product is not waterproof design. (3) If any liquid accidentally enters the product, please disconnect and remove the product immediately. (4) In order to avoid electric shock, please ensure that your hands are free from water when installing or unloading the product. (5) Do not place the product near the heat source or expose it directly near the fire source. (6) Do not place this product in an environment with strong electromagnetic force, otherwise it will cause product failure.
List of articles
1.Earphone x1
thinkplus Bone conducition Headphone
Manual Please read the instruction manual before use
3.Manualx1
2.charger cablex1
Product standard
Product model:Lenovo X7 Roduct material: ABS+PC Bluetooth version: V5.3 Battery capacity: 150mAh Rated input: 5V 150mA Charging time: About 2 hours Running time: About 10 hours Rated power: 0.75W (All technical information is subject to actual performance)
Product operation instruction
1. Power on/off Long press the multifunctional button for about 2 seconds, and the blue light will turn on for 1 second. Long press the multifunction button for about 4 seconds, the red light flashes for 2 times and then power off.
Long press 2S to power on
Long press 4S to power off
2. Bluetooth connection After the headset is turned on, turn on the smart device and enable the bluetooth search display (as shown in the picture)" thinkplus-X7", click the connection successful after the red and blue lights off.
Set
BT
Bluetooth
My device
thinkplus X7
Pairing state light prompt: red and blue lights flash alternately
Matching success Light prompt: red and blue lights out
Product diagram
Indicator description
æTalking microphone çIndicator light èMicrophone éMultifunction key êMinus Key
Alternating red and blue: Red and blue lights go out: Red light is steady on: Blue light is on:
Paired state successfu lconnection be charging Full battery
Charge indication
After normal connection, the smart device will display the power level of the earphone. If the alarm is low, it means that it needs to be charged. Please use the marked 5V charger to connect the charging cable to charge.
5V charger
Magnetic charging port
Charging diagram
Functional operation
turn on:
Long press MFB Key2S
turn off:
Long press MFB Key4S
Previous song:
Double click minus key
Next song:
Double click MFB key
vol+:
Click on the MFB key
vol-:
Click on the minus key
Star voice Assistant: Three strikes MFB key
Answer:
Double click MFB key
Hang up:
Long press MFB key2S
Play/pause:
Long press MFB key1S
Matters need attention
If there is sweat attached to the charging post, please wipe it clean in time and then open it for charging.
Name and content of harmful substances in products
Name and content of harmful substances in products
hazardous substance
name of parts
Pb
Hg
Cd
Cr(VI) PBB
PBDE
Printed circuit module
Shell and other small structural parts
This form is prepared in accordance with the requirements of SJ/T11364 O: indicates that the content of the hazardous substance in all homogeneous materials of the component is in GB/T26572 specified limit requirements below. X: indicates an excess of the hazardous substance in at least one homogeneous material of the component GB26572 specified limit requirements. The components marked "X" on the form are harmful because of the global level of technological development Substitution of matter.
This form is prepared in accordance with the requirements of SJ/T11364 Printed circuit board components *: including printed circuit board and its components, electronic components, etc Depending on the model, the product you purchase may not contain all of the above components.
Electronic and electrical products sold within the territory of the People's Republic of China must mark this Logo. The number inside the logo represents the ring of the product in normal s ervice condition Warranty period.
Warranty statement
Disclaimer:
No warranty, position or other implication of any kind is given in this user's manual The products, specifications and information mentioned are for reference only and will be updated on the website at any time Row notification.
Warranty Statement: Make the following warranties with respect to the products attached to this document: If the Products are twelve (12) months from the date you purchase them(" Warranty Period "), which is damaged due to quality defects under normal use and can be repaired Free repair; If the manufacturer confirms that it cannot be repaired, it will be replaced free of charge. Repair or replace the product after The remaining warranty period (no less than 30 days) shall continue to enjoy the warranty. Purchase date to sales invoice date The period shall prevail; If the date of purchase cannot be determined, the warranty period shall be 13 (13) from the date of manufacture.
Every month. To apply for warranty, please call the product service hotline first and follow our instructions to apply for warranty At the time of repair, you need to provide a valid sales invoice that is accurate, complete and clearly filled out.
The above warranties do not apply to: 1. More than the validity period of three packages; 2. Correcting the warranty card, product code and product ontology are inconsistent; 3. Failure or damage caused by misuse, abuse or improper transportation, use, maintenance or storage; 4. Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accidents; 5. Zipper and buckle are damaged due to excessive force;
Warranty statement
6. Off-line or tear caused by heavy load; 7. Any damage caused by sharp objects; 8. Products showing signs of burning or flooding; 9. Damage caused by unauthorized demolition and modification; 10. Aging, decolorization, wear, breakage and other losses occurring during the normal use of the product. 11. This warranty shall be effective if the original identification label of the product is altered or damaged. Products and accompanying materials
Complete and in good appearance are not guaranteed. You should inspect the product on the spot upon receipt of the product and check for any defects To raise an objection.
The above warranties are all warranties made by us with respect to the products, and are only applicable in mainland China. Nothing in this document affects consumer rights that cannot be excluded or limited by law.
After-sales email :frank@szeysan.cn The service number is 400-812-0102
"
" "
" and other Lenovo logos are Lenovo Group
Trademark of the enterprise to which it belongs. Other trademarks,
company names, products or services mentioned in (this Material)
The name may be the trademark of Lenovo Group or other companies.
Copyright 2023 Lenovo Beijing Co., LTD. All rights reserved.
Corel PDF Engine Version 20.0.0.633