Coleman Airbed Instructions

Important Safety Information

Not suitable for children under 3 years of age.

WARNING: Read airbed instruction manual and follow all safety instructions to avoid serious injury or death.

This furnishing has not been evaluated for flammability or cigarette ignition resistance. See instructions for additional warnings.

Risk of Suffocation

• Infants have suffocated on inflatable mattresses. Never allow a child under 3 years of age or persons with limited mobility to sleep on an inflatable mattress.
• Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a shoulder width space between the inflatable mattress and walls, dressers or other vertical objects to avoid entrapment.
• Always keep the inflatable mattress fully inflated when in use.

This airbed can melt or burn. Keep away from open flames, heaters, and other hot objects. Do not smoke on or near the airbed.

This airbed is not for use in water. It is not a life saving device, personal flotation device, or water toy.

This airbed is not a toy. Do not stand, walk, jump or play on the airbed. This can result in serious injury or damage to the airbed.

General Usage Guidelines

Keep inflatable products away from sharp or pointed objects.

Fill with cold air only. Never use a hair dryer to inflate, this could cause melting.

Do Not Over Inflate. Bursting items can cause serious injury. Inflate the airbed until most of the wrinkles in the material are gone and the bed feels firm to the touch.

CAUTION: Air temperature and weather do affect the air pressure in inflatable products. In cold weather your airbed will lose some pressure due to the fact that the air will contract. If this occurs, you may want to add a little air to improve your airbed's performance. However, in hot weather, the air will expand. You must let some air out to prevent the airbed from failing due to overpressure. You should avoid exposing your airbed to extreme temperatures (hot or cold).

Valve Operation

To Open Valve:

1. Open the external cap.
2. Pull the lanyard to extend the internal seal.
3. Firmly pull the cap to unseat the valve from the inner post, fully opening the valve.

To Close Valve:

1. Reverse Steps 1 & 2. Make sure the valve seats on the inner post.
2. Close the external cap.

Inflation and Deflation

To Inflate using Coleman® QuickPump™ Unit:

1. Open the external cap and pull firmly on the lanyard to extend out. This will open the internal seal.
2. Attach the adapter nozzle to the inflation end of the pump. Insert the pump and turn it on.
3. When fully inflated, seal the valve by pushing in with the pump nozzle. This will seal the internal stopper and keep air from escaping while closing the cap.
4. Fully remove the pump and close the external cap. The valve should appear depressed into itself.

To Deflate using Coleman® QuickPump™ Unit:

Remove the adapter nozzle from the inflation end and attach it to the opposite deflation side of the pump. Repeat the same steps as inflation. This will draw the air out quickly.

To Deflate without use of a Pump:

To deflate, open the external stopper and pull to extend out, allowing air to escape. When fully deflated, close the stopper.

Wrap 'N' Roll™ Storage System (Select models only)

Storage Steps:

1. Deflate the airbed. (Leaving the Double Lock™ Valve open while rolling will help remove any remaining air for more compact storage.)
2. Fold the bed as shown.
3. Roll up the airbed toward the storage flap.
4. Wrap the storage flap around the rolled bed and tie the ends to secure.

Maintaining Firmness

The firmness of your airbed may decrease after you first inflate it, which is often misinterpreted as a leak. Don't worry, your airbed is not really leaking. This is normal on all PVC (vinyl) airbeds and is most noticeable the first several times you inflate your bed. The loss of firmness is due to material stretching that occurs naturally from internal air pressure, your body weight, and temperature changes.

If you notice a decrease in your bed's firmness, simply add more air. To reduce overnight bed sagging and ensure the most comfortable night's sleep, we recommend inflating your airbed at least 2 hours before you plan to go to sleep. This will allow the material time to stretch. Then top off the air right before you go to bed to maintain your firmness throughout the night. If you plan on using the bed for a few nights or more, you'll need to occasionally add air (right before bedtime would be best).

Contact Information and Warranty

Contact for Service:

For products purchased in the United States: The Coleman Company, Inc., 3600 North Hydraulic, Wichita, KS 67219 U.S.A. Phone: 1-800-835-3278 (TDD: 1-316-832-8707).

For products purchased in Canada: Newell Brands Canada ULC, 20B Hereford Street, Brampton, ON L6Y 0M1. Phone: 1-800-387-6161.

Please contact Coleman Consumer Service before returning this product to the place of purchase.

Limited One Year Warranty:

The Coleman Company, Inc. (“Coleman”) warrants that for a period of one (1) year from the date of original retail purchase, this product will be free from defects in material and workmanship. Coleman, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. No warranty is provided for batteries and light bulbs. This is your exclusive warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. Coleman dealers, service centers, or retail stores selling Coleman® products do not have the right to alter, modify or in any way change the terms and conditions of this warranty.

What This Warranty Does Not Cover:

• This warranty does not cover normal wear of parts, parts that are not genuine Coleman® parts, or damage resulting from any of the following: negligent use or misuse of the product; use on improper voltage or current; commercial use of the product; use contrary to the operating instructions; disassembly, repair or alteration by anyone other than Coleman or an authorized service center.
• Further, the warranty does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.
• Warranty void if damage to the product results from the use of a part other than a genuine Coleman® part.

Limitations and Exclusions:

COLEMAN SHALL NOT BE LIABLE FOR DEFECTS THAT ARE CAUSED BY THE USE OF UNAUTHORIZED PARTS OR SERVICE. COLEMAN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OR CONDITIONS. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THE ABOVE WARRANTY OR CONDITIONS. SOME STATES, PROVINCES, OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.

How to Obtain Warranty Service:

Your product must be under warranty in order to obtain warranty service. If your product is defective and is within your warranty period, contact Coleman at 1-800-835-3278 (TDD 1-316-832-8707) in order to receive a return authorization. Do not return product to Coleman without authorization. You will be directed to attach a tag to the product that includes your name, address, daytime telephone number and description of the problem. Include a copy of the original sales receipt. Carefully package the product and send insured by UPS, FedEx Ground or Parcel Post with shipping and insurance prepaid to the address provided by Coleman. The cost of transporting the product to Coleman for warranty service is the responsibility of the purchaser.

Important: DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. DO NOT SHIP WITH THE BATTERIES INSTALLED.

If you have any questions regarding this warranty please call 1-800-835-3278 or TDD 1-316-832-8707 in the United States or 1-800-387-6161 in Canada.