Baby Einstein Geared for Success 2-in-1 Potty Training System
Model: Geared for Success 2-in-1 Potty Training System
Age/Weight Recommendation: 18 Months - 50 lbs (23 kg)
Important Safety Warnings
WARNING!
- NEVER leave child unattended.
- Use only on a flat surface.
- DO NOT use on an elevated surface.
- NEVER lift or carry product with child on it.
- This product is not a toy. DO NOT allow children to play with it.
- Discontinue use of product if damaged, broken, or disassembled.
Battery Warnings
BATTERY WARNING!
- Do not mix old and new batteries.
- Do not mix alkaline, standard, or rechargeable batteries.
- Remove batteries when product is stored for long periods of time or when batteries are exhausted.
- Dispose of exhausted batteries according to instructions.
- Do not recharge non-rechargeable batteries.
- Batteries are to be inserted with correct polarity.
- Keep all batteries away from children.
- Do not short circuit the supply terminals.
- Rechargeable batteries are only to be charged under adult supervision.
- Remove rechargeable batteries before charging.
- CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Radio and Television Interference
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes and Modifications not expressly approved by Summer Infant, Inc. can void your authority to operate this equipment under Federal Communications Commissions rules.
CAN ICES-003 (B)/NMB-003(B)
Product Components
The system consists of the following parts:
- A. Tank: The water tank component.
- B. Potty Top: The main potty seat part.
- C. Upper Base: The upper section of the base structure.
- D. Lower Base: The lower section of the base structure.
- E. Bowl: The removable inner bowl.
- F. Potty Topper: A smaller seat insert for children.
- G. Tank Lid: The lid for the tank component.
Assembly Instructions
Step 1: Assemble the Potty Unit
Refer to the diagrams for visual guidance. The assembly involves connecting the main components:
- Attach the Tank (A) to the back of the Potty Top (B).
- Connect the Upper Base (C) and Lower Base (D) to form the main base structure.
- Insert the Bowl (E) into the base structure.
- Place the Potty Topper (F) onto the seat area.
- Attach the Tank Lid (G) to the Tank (A).
Step 2: Place on Toilet
Once assembled, place the entire potty training system onto a standard adult toilet seat. Ensure it is stable and secure.
Usage Instructions
Using the Potty System:
- The system is designed to help children learn to use the toilet.
- When the child uses the potty, a character may appear (refer to usage diagram).
- Place the Potty Topper (F) onto the seat for a child-sized fit.
- The child sits on the Potty Topper on the main potty unit, which is placed on the toilet.
Battery Replacement
The product requires 2 "AAA" batteries (included).
To replace batteries:
- Locate the battery compartment cover.
- Open the compartment by releasing the latch or sliding the cover.
- Remove the old batteries.
- Insert new batteries (2 "AAA") with the correct polarity (+ and - ends aligned as indicated).
- Close the battery compartment cover securely.
Reset Function
If the product requires a reset, locate the reset button (refer to diagram) and press it using a pointed object like a pen tip.
Cleaning and Maintenance
- Never use this product if there are any loose, damaged, or missing parts.
- Check product before assembly and periodically during use.
- Wipe surfaces with a damp cloth or sponge, using mild soap and clean warm water.
- Towel dry after cleaning.