User Manual for LG Innotek models including: LTD-BK1100 Telematics Modem, LTD-BK1100, Telematics Modem, Modem
LG Innotek Co., Ltd. BK1100 YZP-BK1100 YZPBK1100 bk1100
File Info : application/pdf, 17 Pages, 610.87KB
DocumentDocumentUser manual of LTD-BK1100 LG Innotek Product Name : Telematics Modem Model Name : LTD-BK1100 FCC ID : YZP-BK1100 / IC : Certification : 7414C-BK1100 This LTD-BK1100 is a wireless module that is installed in a vehicle's telematics system and connects to WCDMA (HSPA+) Band 2/5, LTE Band 2/4/5/7/12/17 wireless networks to have voice and data communication functions. It can be carried on land, rivers, and other similar areas and operated while stationary or moving. As a wireless facility device for personal portable communication, it is designed with ultra-small and up-to-date parts to realize small size and light weight. Data communication is possible at uplink 5.76Mbps, downlink 21Mbps transmission speed when operating in HSPA+ mode, and uplink 50Mbps, downlink 150Mbps transmission speed when operating LTE Cat4 mode, so large amounts of data such as video or video calls can be received. It communicates with the host system through the USB port, and receives control commands from the host system to enable data transmission and voice calls. LG Innotek Pin map LGA Pad Layout(Top veiw) Total : 304 pins LG Innotek Pin Descriptions PAD. NAME Antenna Interface Pads C21 MAIN_ANT AC21 DIV_ANT User Interface Pads H6 ACC_PWR_ON I5 BOOT_OK H4 MSG** G3 96H_END** F20 MAIN_ANT_DTC_EN*,** Z20 DIV_ANT_DTC_EN** I7 SPI_LEVEL_SHIFT_EN* AD4 ETHERNET_DCDC_ENABLE** F6 GPIO1* E5 GPIO2* L6 GPIO3** N6 GPIO4** ADC Interface Pads E19 ADC1 AA19 ADC2 PCM Interface Pads W3 PCM_EN** X2 PCM_CLK*,** W1 PCM_SYNC Y3 PCM_DIN Y1 PCM_DOUT** JTAG Pin Description AC7 MDM_JTAG_TMS AD8 MDM_JTAG_PS_HOLD AD6 MDM_JTAG_TDI AE7 MDM_JTAG_TRST_N AB6 MDM_JTAG_TDO AB8 MDM_JTAG_TCK AE9 MDM_JTAG_SRST_N USB Interface Pads DIRECTION DESCRIPTION Input/Output Input/Output RF Main Antenna RF Diversity Antenna Input Output Output Output Output Output Output Output Output Input/Output ACC_PWR_ON BOOT_OK MSG Main ANT Detect Enable Diversity ANT Detect Enable SPI LEVEL SHIFT Enable Ethernet power enable General purpose I/O General purpose I/O General purpose I/O General purpose I/O Input Input ADC Convertor input for main antenna detect ADC Convertor input for diversity antenna detect Output Input Input Input Output PCM 3.3 Level Shifter Enable PCM Clock PCM Frame Sync PCM Data In PCM Data Out Input input Input Input Output Input Input JTAG mode select input JTAG PS HOLD detect JTAG data input JTAG reset for debug JTAG debugging JTAG clock input JTAG reset LG Innotek N2 USB_HS_DM M1 USB_HS_DP K1 USB_VBUS L2 USB_ID SDIO Interface Pads S1 SDC_CLK Q1 SDC_CMD T2 SDC_DATA0** R2 SDC_DATA1** S3 SDC_DATA2 Q3 SDC_DATA3 SGMMI Interface Pads AA11 EPHY_RST_N or UIM2_RESET AE11 EPHY_INT_N or UIM2_DETECT AB10 SGMII_DATA or UIM2_CLK AD10 GND X10 SGMII_RX_P W11 SGMII_RX_M Z10 SGMII_TX_M Y11 SGMII_TX_P AC11 SGMII_CLK or UIM2_DATA** SPI Interface Pads S5 SPI_MOSI T6 SPI_CLK** R6 SPI_CS_N U5 SPI_MISO Q5 SPI_INTERRUPT UART Interface Pads M5 UART2_TX N4 UART2_RX K5 UART1_TX** L4 UART1_RX O5 UART3_TX** P4 UART3_RX USIM Interface Pads I3 UIM1_PRESENT H2 UIM1_CLK** E1 UIM1_RESET** Input/Output Input/Output Input Input USB high speed data (minus) USB high speed data (plus) USB power USB ID Output Output Input/Output Input/Output Input/Output Input/Output Secure digital controller clock Secure digital controller command Secure digital controller data bit 0 Secure digital controller data bit 1 Secure digital controller data bit 2 Secure digital controller data bit 3 Output Input Input/Output Input Input Output Output Input/Output Ethernet PHY reset or UIM2 reset Ethernet PHY interrupt or UIM2 DETECT SGMII input Output data or UIM2_CLK Ground SGMII receive - plus SGMII receive -minus SGMII transmit - plus SGMII transmit -minus SGMII clock or UIM2_DATA Output Output Output Input Input SPI Serial Output SPI Serial Clock SPI Chip Select SPI Serial input MICOM LGA SPI interrupt Output Input Output Input Output Input UART2 Transmit data UART2 Receive data Debug UART5 Transmit Data Debug UART5 Receive Data UART6 Transmit data UART6 Receive data Input Output Output Detection of an external UIM card Clock Output to an external UIM card Reset Output to an external UIM card LG Innotek G1 UIM1_DATA** F2 VREG_L6_UIM1 E3 GND D2 GND A1 GND C1 GND B2 GND HSIC Pin Description AB2 HSIC_DATA AC1 HSIC_STB AD2 NC AE1 NC DSRC Pin Description Y7 COEX_UART_RX* Z6 COEX_UART_TX** X4 RFCLK2_QCA AA3 WLAN_EN_DSRC X6 DSRC_SLP_CLK Y5 WLAN_3V_EN_DSRC Z4 DSRC_PPS** X8 MDM2AP_INT_N** Z8 AP2MDM_INT_N Control Pin Description A3 LGA_PHONE_ON_N B4 MDM_RESOUT_N C3 LGA_RESIN_N Power Supply Pin Description A17 VPH_PWR for PAM B16 VPH_PWR for PAM A15 VPH_PWR for PAM B14 VPH_PWR for PAM A9 VPH_PWR for PMIC B8 VPH_PWR for PMIC A7 VPH_PWR for PMIC C7 VPH_PWR for PMIC Voltage Reference Pin Description C9 VREG_L11_1P8 D8 VREG_L11_1P8 Input/Output Output Data connection with an external UIM card Supply Output for an external UIM card Ground Ground Ground Ground Ground Input/Output Input/Output HSIC data HSIC Strobe signal No Connect No Connect Input Output Output Output Output Output Input/Output Output Input LTE receiver sync for coexistence with UART LTE transmitter sync for coexistence with UART Low noise RF clock Output WLAN DSRC Enable DSRC sleep clock Used for WLAN enable Pulse Per Second MDM to AP interrupt AP to MDM interrupt Input Output Input ON/OFF Control Reset Output External Reset Input Input Input Input Input Input Input Input Input power supply (4.0V) power supply (4.0V) power supply (4.0V) power supply (4.0V) power supply (4.0V) power supply (4.0V) power supply (4.0V) power supply (4.0V) Output Output LDO out for 1.8V pull up LDO out for 1.8V pull up LG Innotek Voltage Reference for SGMII AE3 (VREG_L5_UIM2) Ethernet IO level NC Pads G9 NC B12 NC I9 NC G7 NC C5 NC D4 NC GND Pads A21 GND E21 GND G21 GND I21 GND K21 GND M21 GND O21 GND Q21 GND S21 GND U21 GND W21 GND Y21 GND AA21 GND AE21 GND B20 GND D20 GND H20 GND J20 GND L20 GND N20 GND P20 GND R20 GND T20 GND V20 GND X20 GND AB20 GND AD20 GND A19 GND Output Ethernet I/O voltage No Connect No Connect No Connect No Connect No Connect No Connect Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground LG Innotek C19 G19 I19 K19 M19 O19 Q19 S19 U19 W19 Y19 AC19 AE19 B18 D18 F18 H18 J18 L18 N18 P18 R18 T18 V18 X18 Z18 AB18 AD18 C17 E17 G17 I17 K17 M17 O17 Q17 S17 U17 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground LG Innotek W17 Y17 AA17 AC17 AE17 D16 F16 H16 J16 L16 N16 P16 R16 T16 V16 X16 Z16 AB16 AD16 C15 E15 G15 I15 W15 Y15 AA15 AC15 AE15 D14 F14 H14 X14 Z14 AB14 AD14 A13 C13 E13 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground LG Innotek G13 I13 W13 Y13 AA13 AC13 AE13 D12 F12 H12 X12 Z12 AB12 AD12 A11 C11 E11 G11 I11 B10 D10 F10 H10 E9 W9 Y9 AA9 AC9 F8 H8 E7 W7 AA7 B6 D6 J6 P6 V6 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground LG Innotek A5 W5 AA5 AC5 AE5 F4 J4 R4 T4 V4 AB4 K3 M3 O3 U3 AC3 J2 P2 V2 Z2 I1 O1 U1 AA1 GND1 GND2 GND3 GND4 GND5 GND6 GND7 GND8 GND9 GND10 GND11 GND12 N14 P14 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground LG Innotek R14 M13 O13 Q13 S13 N12 P12 R12 M11 O11 Q11 S11 N10 P10 R10 M9 O9 Q9 S9 N8 P8 R8 G5 GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Ground Table - Pin Descriptions LG Innotek Communication Specification WCDMA Receiver Bandwidth: 5MHz Frequency: B2(1930 MHz 1990 MHz), B5(869 MHz 894 MHz) RF to Baseband Direct conversion (Zero IF) Modulation method: QPSK and 16QAM Transceiver Frequency: B2(1850 MHz 1910 MHz), B5(824 MHz 849 MHz) Maximum RF Output: Power class 3, 20.3dBm ~ 25.7dBm max. Modulation method: QPSK Baseband to RF Direct conversion (Zero IF) LTE Receiver Bandwidth: B2/B4/B7 (5 MHz, 10 MHz, 15 MHz, 20 MHz), B5/B12/B17 (5 MHz, 10 MHz) Frequency: B2 (1930 MHz 1990 MHz), B4 (2110 MHz 2155 MHz), B5 (869 MHz 894 MHz), B7(2620 MHz 2690 MHz) B12 (729 MHz 746 MHz), B17(734 MHz 746 MHz) RF to Baseband Direct conversion (Zero IF) Modulation method: QPSK, 16QAM and 64QAM Transceiver Frequency: B2 (1850 MHz 1910 MHz), B4 (1710 MHz 1755 MHz), B5 (824 MHz 849 MHz), B7 (2500 MHz 2570 MHz), B12(699 MHz 716 MHz), B17(704MHz 716 MHz) Maximum RF Output: Power class 3, 20.3dBm ~ 25.7dBm max. Modulation method: QPSK and 16QAM Baseband to RF Direct conversion (Zero IF) LG Innotek Mechanical and Environmental Specification Mechanical Dimensions Dimensions 34.0 x 40.0 x 3.5 mm (L x W x T) (Tolerance width, length: ±0.15 / height: ±0.2) Weight Max. 10.6 grams Flatness Max. 100 um The Modem provides the RF shielding. Mechanical Dimension LG Innotek Footprint (Top View) Modem PAD land size LG Innotek Environmental Specification 1) Storage temperature : -40 ~ +85 2) Operation temperature : Class A* -20 ~ +70 Class B** -30 ~ -20, +70 ~ +85 * Function(Voice call, data call, SMS) and 3GPP specification. (in normal operation.) ** Some performance of 3GPP specification may be degraded. 3) Operating humidity : 80% (60) 4) RoHS compliant RFx Information The strength of the RF field produced by the wireless module or modules embedded in the TCU is well within all international RF exposure limits known at this time. Because the wireless modules embedded in the TCU emit less than the maximum amount of energy permitted in radio frequency safety standards and recommendations, the manufacturer believes these modules are safe for use. Regardless of the power levels, care should be taken to minimize human contact during normal operation. This module should be remain more than 20 cm (8 inches) from the body when wireless devices are on and transmitting. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. Operation is subject to the following two conditions: (1) this module does not cause interference , (2) this module accepts any interference that may cause undesired operation. Information for the integrator The integrator must not provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual that is provided by the integrator for end users must include the following information in a prominent location. To comply with FCC RF exposure requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operated in conjunction with any other antenna or transmitter. The label for the end product must include FCC ID: YZP-BK1100 or A RF transmitter inside, IC ID: 7414C-BK1100 LG Innotek Integration Guide This module complies with FCC/IC rules. FCC : Part 22, Part 24, Part 27 ISED : RSS-130, RSS-132, RSS-133, RSS-139, RSS-199 Furthermore, this device complies with FCC/IC radiation exposure limits set forth for uncontrolled environments. This module must be installed and operated with minimum distance of 20 cm between the radiating element and the user. This module must not be co-located with any other transmitters or antennas. Cet module est conforme à l'exposition de FCC et IC rayonnements limites é-tablies pour un environnement non contrôlé. Cet module doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Ce module ne doit pas être même endroit avec d'autres émetteur ou antennes. To comply with FCC/IC regulations limiting both the maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed the values listed in the following table. LTD-BK1100 Ant. Gain WCDMA Band 2 WCDMA Band 5 LTE Band 2 LTE Band 4 LTE Band 5 LTE Band 12 LTE Band 17 Original Antenna 1 2.0 dBi 4.5 dBi 2.0 dBi 2.0 dBi 4.5 dBi 4.5 dBi 4.5 dBi Additional Antenna 2 5.97 dBi 2.18 dBi 5.97 dBi 4.13 dBi 2.18 dBi 3.97 dBi -1.74 dBi Maximum 5.97 dBi 4.5 dBi 5.97 dBi 4.13 dBi 4.5 dBi 4.5 dBi 4.5 dBi To satisfy the labeling requirements, the following text must appear on the exterior of the end product. Contains transmitter module FCC ID: YZP-BK1100 Contains transmitter module IC ID: 7414C-BK1100 Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Users may lose the authority to operate this equipment if an unauthorized change or codification is made. Note: If this module is intended for use in a portable device, additional testing will be required to satisfy the RF exposure and SAR requirements of FCC Part 2.1093 and RSS-102. LG InnotekMicrosoft Word Office 365용