ELECOM DE-NEST-GLP01 LED Lantern

Components

This LED lantern is designed for use with the NESTOUT outdoor battery, which is sold separately.

Main Unit:

• 1. Light: The primary illumination source.
• 2. Rotary switch: Controls power and brightness.
• 3. Lock: Secures or releases components.
• 4. Strap loop: For attaching a strap or for mounting.

Connector: Connects the lantern to the battery.

Mini tripod: A collapsible stand for positioning the lantern, adjustable to two heights.

How to Use

Connecting the Lantern

1. Open the battery's cap and attach the connector. Screw it on until there is no gap; this may require some force, which is normal.
2. Ensure the rotary switch on the main unit is OFF. Connecting while the switch is ON might prevent the LED from lighting up due to the battery's protection function.
3. Verify the correct alignment between the lantern and the battery's USB-A port before connecting.
4. Turn the rotary switch to the ON position to activate the light.
5. To detach, first turn the switch OFF. Press the lock to release, then pull the lantern away from the battery. Finally, remove the connector. Ensure the connector is pushed in until it locks with no gap.

Brightness Adjustment

Turn the rotary switch ON and continue rotating it to increase the brightness to your desired level.

Attaching the Mini Tripod

Unfold the mini tripod. Secure the battery by screwing it onto the strap loop in the center of the tripod.

Folding the Rotary Switch

The tab on the rotary switch can be folded inwards. Fold it when the power is OFF, as shown in the illustration.

Usage Time and Gear Mode

Possible Usage Time (Reference): For a 5000 mAh battery capacity, usage time ranges from approximately 4.5 to 26 hours or more. Actual usage time may vary based on the portable power charger's characteristics and ambient temperature.

Gear Mode: In normal mode, the light may automatically turn off after approximately 2 hours at low intensity. Gear mode allows for continuous use of approximately 12 hours. To activate or deactivate Gear mode, double-click the power button on the battery side. The Power LED will blink when Gear mode is ON. Gear mode deactivates upon performing the same action again or turning the power OFF.

Notes: The switch is analog and unstepped, meaning there can be slight variations in brightness levels. The battery charge indicator may not display accurately during continuous minimum brightness use, but this does not affect usable time.

Specifications

Safety Precautions

WARNING

• ⚠️ Stop using immediately and consult your retailer if you notice smoke, abnormal odors, or noises. Continued use may cause fire or electric shock.
• Do not use if the product is wet, contains foreign materials or liquid, or if the case is damaged.
• Do not use or store in unstable locations.
• Ensure the connector is firmly inserted into the NESTOUT outdoor battery port. A loose connection can lead to fires and electric shocks.
• ⚠️ Do not look directly into the LED light, especially for extended periods, as it may damage your eyes.
• ❌ Do not attempt to disassemble or modify the product; this could cause fire, electric shock, or injuries.
• ❌ Do not dispose of the product in fire, as it may cause an explosion or breakage.

CAUTION

• Before use, check that connectors are free from dust or liquid. Charging with wet or contaminated connectors can cause fires, electric shocks, or malfunctions.
• Avoid using or storing in places exposed to direct sunlight, high temperatures, high humidity, near water sources, with excessive dust, or with significant vibration.
• Do not use or store near dusty areas like bedding, as this could cause fire or device failure.
• Stop using immediately if you notice any damage such as cracks, deformation, or deterioration.
• Do not use alcohol or other chemicals on the product.
• Remove the product from the battery if not in use for an extended period to prevent potential electric malfunctions.
• Do not drop, subject to strong shocks, or place objects on the product.
• Keep out of reach of children.
• A slight rise in product temperature during use is normal.
• Wipe the product body with a soft, dry cloth. For stubborn dirt, use a cloth dampened with water or diluted neutral detergent, then wrung dry.

Waterproofing and Dust-proofing

• Do not remove the product from the battery when wet or dirty. Water or foreign matter entering the port can cause malfunctions. Ensure all moisture or dirt is wiped off before removal.
• If the O-ring is damaged or deformed, the waterproof and dustproof function may not operate correctly.

Other Safety Precautions

• Remove the dedicated gear from the portable power charger after use to prevent battery depletion.

Limitation of Liability

ELECOM Co., Ltd. is not liable for lost profits, special, consequential, indirect, or punitive damages, nor for any loss of data or other problems with connected devices arising from the use of this product.

Compliance and Support

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. Design and specifications are subject to change without prior notice for product improvement.

Responsible Party: ELECOM USA, Inc., 2211 Michelson Dr, Suite 900, Irvine, CA 92612 USA. Website: elecomusa.com

European Authorized Representative: VISHTEC ltd, 3rd floor office 5, Plovdiv 2 Liuben Karavelov bul, 4002 Bulgaria. Email: compliance@vish-tec.com

WEEE Disposal: The WEEE symbol means waste electrical and electronic equipment should not be disposed of as general household waste. Treat WEEE separately to prevent harm. Consult your retailer or local municipal office for collection, return, recycle, or reuse options.

Manufacturer: ELECOM CO., LTD., Fushimimachi 4-1-1, Chuo-ku, Osaka City. Website: www.elecom.co.jp/global/

ELECOM CO., Ltd. owns the copyright of this manual. Unauthorized copying or reproduction is prohibited. Contact your dealer for suggestions or doubts.

Specifications and appearance are subject to change without prior notice. ELECOM is not responsible for device failure or malfunctions of other devices resulting from the use of this product. Export of this product may require permission according to foreign currency laws.

Global Support

For support outside Japan, contact the local retailer. ELECOM Co., Ltd. (Japan) does not offer customer support for purchases or usage outside Japan, nor support in languages other than Japanese. Replacements are made under ELECOM warranty stipulations.

Visit: www.elecom.co.jp/r/s536