MobiWire Hinto 4G User Manual

Mobile Appearance

The MobiWire Hinto 4G features a classic mobile phone design with a display screen and a physical keypad.

Manufacturer: Mobiwire

Manufacturer trademark: MobiWire

Model: MobiWire Hinto 4G

Know Your Phone

The phone has the following external components:

Foreword

Thank you for choosing the MobiWire mobile phone. This phone complies with PRC and European standards and is approved for GSM networks. It can be used internationally depending on your service provider's roaming arrangements. A GSM service subscription is required.

Safety Precautions

Distance of Operation

This phone meets radiofrequency exposure guidelines. Specific usage guidelines are:

Environmentally Friendly Disposal

Old electrical appliances should not be disposed of with regular waste. Dispose of them separately at communal collecting points. This helps recycle raw materials and treat toxic substances.

Quick Start

Keypad Explain

KeyFunction Description
Left softkeyEnter the Main menu
Right softkeyIn home screen, enter Contacts; other screens, return to the previous menu.
Green keyAnswer incoming call; in home screen, enter call history.
Red keyReject incoming call; in home screen, long press to power off; other screens, return to home screen.
Navigation keyMove highlight Up/Down/Left/Right.
Center keyConfirm selection to enter function.
Number keyInput corresponding character.
* keyDial pad input star character.
# keyPress to input # character.

Install SIM Card

The phone supports GSM SIM cards. Locate the SIM card groove on the back of the phone and slide the card in completely. Ensure the chip faces downwards and pay attention to the slot direction.

Notes:

Install T-flash card

  1. Switch off the phone and remove the battery.
  2. Push the metal card holder towards the bottom of the phone and lift the released end.
  3. Place the memory card into the holder with metal contacts facing down, and push the holder until it locks.

Notes:

Installing Battery

Align the battery chip with the metallic salient point in the battery compartment. Insert the battery until it is seated. Slide the battery cover onto the back of the phone until it locks.

Battery Charging

Insert one end of the charger into the phone's charging port and the other end into an electrical outlet. The screen will display a charging sign. Remove the plug when charging is finished.

Notes:

Menu Functions

The phone offers various functions:

The phone displays recycling [recycle symbol] and RoHS compliance symbols.

Accessories

Use only manufacturer-approved batteries, chargers, and accessories. Using unauthorized types may invalidate the warranty and be dangerous.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Regulations

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received.

FCC ID: QPN-HINTO

Unauthorized changes may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference. It may generate radio frequency energy and cause interference if not used as instructed.

If interference occurs, try the following:

Body-worn Operation

This device was tested for body-worn operations. To comply with RF exposure requirements, maintain a minimum separation distance of 10mm between the user's body and the handset, including the antenna. Third-party accessories like belt-clips and holsters should not contain metallic components. Accessories not meeting these requirements should be avoided.

SAR (Specific Absorption Rate)

This wireless phone meets government requirements for radio wave exposure. Guidelines are based on scientific studies with a safety margin.

The FCC SAR limit for the USA is 1.6 W/kg averaged over one gram of tissue. The MobiWire Hinto 4G's highest reported SAR values are 1.2W/kg for ear use and 1.413W/kg for body-worn use.

For body-worn operations, tested with the back of the handset 1cm from the body, maintain a 1cm separation distance using compliant accessories. Accessories with metallic components should be avoided.

Technical Specifications

Battery Specifications

Battery TypeBattery CapacityTalk timeStandby time
Li-battery1000mAh4.8hours280hours

Battery Manufacturer: Shenzhen Aerospace Electronic Co., Ltd.

Battery model: 1781836112

Notice: Actual phone usage conditions depend on local environment, SIM card, and usage methods.

Warning: The manufacturer is not responsible for consequences arising from violating recommendations or inaccurate use of the mobile phone.

Explanation: The Company reserves the right to final interpretation regarding upgrades without prior notice.

Models: HINTO, QPN-HINTO, QPNHINTO, MobiWire Hinto 4G Mobile Phone, MobiWire Hinto 4G, Mobile Phone

File Info : application/pdf, 18 Pages, 552.54KB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=5066489

References

Microsoft Word 2013 Microsoft Word 2013

Related Documents

PreviewUN38.3 Test Report for Mobiwire Rechargeable Li-ion Battery (Model 178205511)
This document is a UN38.3 test report for a rechargeable Li-ion battery, model 178205511, manufactured by Ningbo Veken Battery Co., Ltd. and consigned by Mobiwire Mobiles (NingBo) Co.,Ltd. The tests were conducted by Dongguan ZRLK Testing Technology Co., Ltd. and cover various safety and performance aspects including altitude simulation, thermal test, vibration, shock, external short circuit, crush, overcharge, and forced discharge, adhering to UN recommendations.