Neewer N96 LED Light

Package Contents

• Light x1
• Clip x1
• Cold shoe x1
• USB cable x1

Product Illustration

The product is a compact LED light. Key components and features are illustrated:

Front View:

• 1. LED Indicators: Multiple small lights indicating status (e.g., charging, battery level).
• 2. Setting Adjustment Button: A button used for mode selection and parameter adjustments.
• 3. Power Button: Typically located on the side or top for turning the device on/off and switching modes.
• 4. USB-C Port: Located on the side for charging the internal battery.
• 5. Cold Shoe Mount: A standard mount for attaching the light to a camera's hot shoe.
• 6. 1/4" Thread Mount: A standard threaded socket on the bottom for mounting to tripods or other accessories.

Setting Adjustment Button Functions

In CCT (Correlated Color Temperature) mode:

1. Short press the button. When the first indicator from the left starts flashing, rotate the dial to adjust color temperatures.
2. Short press the button again. When the first indicator from the right starts flashing, rotate the dial to adjust brightness.

FX Mode

Short press the power button to cycle through various lighting effect modes: quick yellow flashing, white SOS, yellow/white flashing, yellow breathing, white breathing, and back to quick yellow flashing. Rotate the dial to adjust the brightness of these effects.

Power Button Functions

Long press the power button to turn the device on or off. A short press switches between CCT and FX modes.

Instructions

Mounting Options

The light can be mounted in several ways:

1. Attached to a camera's cold shoe mount.
2. Mounted using the included clip, secured with the 1/4" screw and knob.
3. Attached to any magnetic metal surface using the integrated magnets.

Charging

During charging, the indicator lights turn blue. They remain lit when fully charged. The indicators flash when the battery is low, signaling the need for immediate charging.

Charging requires a power source providing DC 5V 1A, connected via the USB-C port.

Battery Warnings

• Do not attempt to disassemble, modify, or repair the built-in battery yourself. Any unauthorized operation may cause the battery to leak, overheat, catch fire, or explode.
• If unusual charging rates occur or the indicator flashes abnormally, stop charging immediately and contact customer service.

Safety Precautions

• Do not use the light near inflammable or volatile liquids (such as gasoline, chemical solutions, etc.) to prevent explosion.
• Do not use the light to photograph vehicles in motion, as this could contribute to traffic accidents.
• Do not shine the light directly into the eyes of humans or animals at close range to avoid potential retina damage or blindness.

Specifications