Instructions
Step 1
Slide the weight to the opposite side of the BOSFab leader wrap. This isn't essential, but it helps the BOSFab leader wrap slide further onto the diver.
Visual Aid: The image shows a fishing reel with a dial indicating settings. Text on the image suggests that placing the weight on a specific side of the reel mechanism will work better than the other side.
Step 2
Position the leader wrap on the diver with the clip facing down and out. Facing the front or the back of the diver does not matter.
Visual Aid: The image displays the BOSFab leader wrap connected to a fishing diver. Text on the image indicates that the clip should be oriented "Clip Down & Out".
Step 3
If using velcro to attach to your rod, snap the diver release closed and tuck the diver under the bottom of the reel and velcro the BOSFab leader wrap to the rod. This helps keep the line more centered and prevents the diver from pulling to one side. Every rod and reel is going to be a bit different and you may have to try and see what works best for your setup.
Visual Aid: The image illustrates the diver release mechanism in a closed state and the diver tucked beneath the fishing reel. A velcro strap is also shown. Text labels confirm "Diver Release Closed and Diver Tucked under the reel" and indicate the presence of "Velcro".