打印

[PDF] INSTRUCTION MANUAL INSTRUCTION MANUAL

INSTRUCTION. MANUAL. Model: C-3718-1B. INSTRUCTION. MANUAL. C-3718-1B. Safety Information. Sit in the center of the chair, with your back to the backrest. Do ...

• Google Docs
• Google Drive
• Download [pdf]



File Info : application/pdf, 2 Pages, 1.52MB

Document Document

To deodorize the leather leave the chair in a shady outside for 1-2 days.

For longer use
Re-tighten bolts every 6 months by using the enclosed allen-key. *Using an electric drill can damage the chair. Please re-tighten bolts manually.

Safety Information

Sit in the center of the chair, with your back to
the backrest

Do not sit at the front edge of the chair

Do not stand on the chair

Do not use the chair with more than one
person

Do not push the chair around when a person
is sitting in it

Do not push down on the backrest when a
person is reclined

Do not place all your weight on only the
backrest

INSTRUCTION MANUAL
Model: C-3718-1B

INSTRUCTION MANUAL
C-3718-1B

Package List

(A)*1 Backrest

(B)*1 Seat

(C)*1L * 1R Armrests

(D)*1 Mechanism

(E)*1 Gas Lift

(F)*1 Base

(G)*5 Legs

(H)*5 Casters

(I)*4 Bolts

(J)*6 Bolts

(K)*10 Bolts

(L)*4 Bolts

(M)*1 Wrench

Assembly Instruction

(H) (K)* 2
(F)

(G)

(G)

1 Turn the Base (F) upside down, insert the Legs (G)*5 into the Base one by one. Use Wrench (M), secure both with Bolts (K)*10.

2 Press Casters (H)*5 into the holes at the end of Legs (G)*5.

(E)

(A)

(I)* 4

(F)
3 Insert the Gas Lift (E) into the Base (F).
(J)* 3

50%
(C)
NOTE: 1.Bolts (I) are only tightened 50%. 2.Armrests (C)x1Lx1R are marked with "L" (Left) and "R" (Right) to show which side they should be installed.

(J)* 3 (B)

FRONT

4 Using Wrench (M), install Armrests (C)x1Lx1R to both sides of the Backrest (A) with Bolts (I)*4.
(L)* 4 (D)

NOTE: The Seat (B) is marked with "FRONT", please make sure the installation direction is correct.
5 Turn the Seat (B) upside down . Using Wrench (M), install Armrests (C)x1Lx1R to the Seat with Bolts (J)*6.

NOTE: Make sure the "FRONT" direction of Mechanism (D) and Seat (B) are the same.
6 Using Wrench (M), attach Mechanism (D) to the Seat (B) with Bolts (L)*4.

100%

Using Wrench (M), 100% tighten the previously installed
7 Bolts (I)*4 on the Armrests (C)x1Lx1R. Align the hole on Mechanism (D) with Gas Lift (E), and press the Chair down until it is fully secured.

8 Finish the installation.

Instructions For Use

CAUTION:
* Before using the chair, check to ensure that all bolts are fully tightened. * Lubricate all parts and tighten all bolts every 6 months or whenever needed.