Toro Greensmaster 3300/3400 Series Traction Unit 8-Blade EdgeSeries DPA Cutting Unit Parts Catalog

Form No. 3469-971 Rev C

Ordering Replacement Parts

To order replacement parts, please supply the part number, the quantity, and the description of each part desired.

Understanding Reference Numbers

Each identified part in an illustration has a reference number. The reference number for a part also appears in the parts list, along with other information about the part. This catalog uses two special reference number formats, one to indicate parts in a service assembly and another to indicate the quantity of a given part in an illustration.

Service Assembly Reference Numbers

Parts in service assemblies have reference numbers in the form a:b. The 'a' represents the reference number of the entire service assembly and the 'b' represents a sequential number unique to each part within the service assembly. For example, a wheel assembly might be identified by reference number 6, the tire by 6:1, the valve by 6:2, and the wheel by 6:3. When you order the assembly identified by reference number 6, you receive all parts identified by reference numbers 6:1, 6:2, and 6:3. However, you may also order any part individually. Reference numbers of this type appear in illustration and in parts lists.

Reference Numbers Indicating Quantity

In an illustration, if a reference number indicates more than one part, the reference number has the form nX y. The 'n' represents the quantity of the part, the 'X' is the multiplication symbol, and the 'y' represents the reference number. For example, in an illustration, the reference number 2X 37 means that two of the parts identified by reference number 37 are indicated.

Frame Assembly
Reel Assembly
Rear Roller Assembly
Pitch Arm and Weight Assembly
Rear Roller Brush and Front Roller Assembly

Frame Assembly

A diagram illustrating the Frame Assembly components with corresponding part numbers and descriptions.

Ref.	Part Number	Qty.	Description	Ref.	Part Number	Qty.	Description
1	119-9303	1	Crossmember	24:1	106-5363	2	Shaft-Adjuster
2	119-4005	1	LH Sideplate ASM	24:2	106-5344	2	Bushing-Flange, Keyed
2:2	117-6619	1	Bushing	24:3	119-4164	2	Washer-Wave
3	119-4007	1	RH Sideplate ASM	24:4	32120-93	2	Ring-Retaining
3:2	117-6619	1	Bushing	24:5	137-6130	2	Screw-Adjuster, Bedbar
4	115-7042	4	Bolt-Shoulder, Flange	24:6	119-4155	2	Washer-Hardened
5	119-4041	4	Nut-HF	24:7	119-4156	2	Spring-Compression
7	119-4012	3	Screw-HWHTF	24:8	119-4039	2	Nut-Hex
8	119-4095	1	Grass Shield ASM	24:9	99-2097	2	Detent
8:2	137-9706	1	Decal-Warning	24:10	119-4067	2	Screw-HH
9	106-2619	1	Strip-Seal	25	147-1290-03	1	Bar-Cutoff
24	121-2637	1	DPA Rebuild Kit	26	87-6620	4	Screw-Tph Thd Form

Reel Assembly

A diagram illustrating the Reel Assembly components with corresponding part numbers and descriptions.

Ref.	Part Number	Qty.	Description	Ref.	Part Number	Qty.	Description
2	115-3299	2	Seal-Flocked	12	119-4153	2	Rubber Bushing ASM
3	140-5510	2	Bearing-Sealed, Stainless	13	52-2890	2	Bushing-Nylon
4	115-5258	1	Spring-Wire, Flat	14	119-4151	2	Screw-Bedknife
6	106-2648-01	1	Bedbar	15	137-6092	1	Bedknife-Edgemax
7	119-4150	2	Washer-Flat	15	137-6097	1	Bedknife-Fairway
8	52-2900	4	Washer-Plastic	15	93-4264	1	Bedknife-Low Cut (21In GR)
9	117-9493	2	Bolt-Bedbar	15	94-6392	1	Bedknife-Highcut (21In GR)
10	140-9234	2	Nut-Hex Lock
11	137-8511	1	21 Inch 8 Blade Low Drag Edge Series+ Reel ASM

Optional Equipment

Rear Roller Assembly

A diagram illustrating the Rear Roller Assembly components with corresponding part numbers and descriptions.

Ref.	Part Number	Qty.	Description	Ref.	Part Number	Qty.	Description
1	147-1190	1	GR21 Rear Roller ASM	5	3274-54	4	Screw-HSH
1:2	147-1344	1	Shaft-Roller (21In)	6	119-4040	4	Nut-HF, NI
1:3	147-1500	2	Bearing-Ball	7	140-5691	2	Bracket-GR Front HOC
1:4	147-0702	2	Nut-Bearing Lock	8	110-7352	2	Screw-HOC
2	119-4166	2	Spacer-Height, Roller	9	99-3773	2	Bolt-Plow
3	119-4157	2	Retainer-Shaft	11	133-7570	2	Nut-Flange, NI
4	119-4165	8	Shim-Height, Roller	12	119-4067	2	Screw-HH

* Red seal faces bearing nut 1:4

Pitch Arm and Weight Assembly

A diagram illustrating the Pitch Arm and Weight Assembly components with corresponding part numbers and descriptions.

Ref.	Part Number	Qty.	Description	Ref.	Part Number	Qty.	Description
1	147-0901	2	Arm-Pitch	6:2	360-0398	1	O-Ring
2	117-9456	1	Crosslink	6:3	237-22	2	O-Ring
3	119-4012	4	Screw-HWHTF	7	117-6706	1	Clamp-Motor
4	120-3221	1	LH Reel Nut ASM	8	322-11	2	Screw-HH
4:1	120-3220	1	Nut-Reel, Splined (LH) •	9	117-6849	1	Shield-Spring
4:2		1	Plug-Plastic	10	3274-18	2	Screw-HSH
6	115-5227	1	Motor Adapter ASM	11	119-4038	4	Nut-Hex
6:1	115-3294	1	Adaptor-Motor	12	131-6150	2	Screw-HWHTF

• Not serviced separately

Rear Roller Brush and Front Roller Assembly

A diagram illustrating the Rear Roller Brush and Front Roller Assembly components with corresponding part numbers and descriptions.

Ref.	Part Number	Qty.	Description	Ref.	Part Number	Qty.	Description
1	131-1842	1	Shaft-Drive	19:2	105-6792	1	Brush-Roller
2	147-0990	1	Adapter-RH (Greens)	19:3	104-1830	2	Bolt-J
3	115-3340	1	Weight ASM, GR	19:4	3296-2	2	Nut-Lock, NI
3:2	360-0398	1	O-Ring	19:5	132-0717	2	O Ring
3:3	121-4609	1	Plug-Expansion	20	131-1838	1	Bracket-Bearing, RH
5	131-1852	1	Adapter-Housing	21	120-2830	1	Housing-Drive, Brush
6	119-1156	1	O-Ring	22	112-6957	2	Washer-Hardened
7	114-7728	1	Screw-HHF, Patch	23	132-0701	1	Pulley-Driven
8	131-1880	1	Ring-Retaining, EXT	24	121-4600	1	Nut-Hex
9	3296-42	2	Nut-Lock, NI	25	131-1846	1	Idler-Drive
10	131-1844	1	Cover-Bearing	26	131-1848	1	Spring-Torsion
11	131-1840	1	Bracket-Bearing, LH	27	131-1847	1	Bushing-Idler
12	3274-8	4	Screw-HSH	28	127-8633	1	Screw-HSH, Patch
13	132-0716	2	Ring-Retaining, External	29	161-7356	1	Pulley - Idler, ASM
14	132-0700	3	Seal-Flocked	29:2	251-259	1	Bearing-Ball
15	131-1864	2	O-Ring	29:3	104-4727	1	Ring-Retaining
16	132-0703	2	Bearing-Ball, Spherical	30	131-1884	1	Screw-HSBH, Patch
17	115-7143	1	Spring-Wave	31	3290-511	4	Screw-HSBH
18	132-0718	1	Collar-Shaft, Stepped	32	104-8300	4	Nut-HF, NI
19	132-0724	1	Rollerbrush ASM	33	131-1855	1	Pulley-Drive
19:1	132-0702	1	Shaft-Brush	34	131-1884	1	Screw-HSBH, Patch
35	105-5720	1	Belt-V, Poly	38:4	147-0702	2	Nut-Bearing Lock
36	131-1843-03	1	Cover-Drive, Belt	39	115-7364	2	Block-Clamp, Scraper
37	131-1883	3	Screw-HSBH	40	147-1330-03	1	Scraper-Wiehle, GR (21In) [black]
38	147-1205	1	Roller ASM, Hhoc Wide Wiehle(21In)	41	115-7372	2	Screw-HH
38:1	147-1204	1	Tube-Roller, Hhoc Wide Wiehle (21In, LD)	42	115-7373	2	Nut-Lock
38:2	147-1344	1	Shaft-Roller (21In)	43	119-4067	2	Screw-HH
38:3	147-1500	2	Bearing-Ball	44	98-3499	4	Washer-Flat
				45	33093-00	2	Washer-Flat

* Red seal faces bearing nut 38:4

Notes:

	Руководство оператора Toro Greensmaster 3300 TriFlex Подробное руководство оператора для коммерческого использования газонокосилки Toro Greensmaster 3300 TriFlex. Содержит инструкции по безопасной эксплуатации, сборке, техническому обслуживанию и уходу за машиной.
	Руководство оператора Greensmaster® 3300 TriFlex™ Подробное руководство оператора для тягового блока Toro Greensmaster® 3300 TriFlex™, включающее инструкции по безопасной эксплуатации, техническому обслуживанию и спецификации.
	Toro Greensmaster Flex 2120 Traction Unit Parts Catalog Comprehensive parts catalog for the Toro Greensmaster Flex 2120 Traction Unit (Model 04044), detailing all components with reference numbers and descriptions for ordering replacement parts. Includes assembly diagrams and part lists.
	Toro Reelmaster 5010 Series DPA Cutting Unit Operator's Manual Operator's manual for the Toro Reelmaster 5010 Series DPA Cutting Unit, featuring 8 and 11 radial blades or 11 blades with a 5-reel EdgeSeries cutting unit. This manual provides essential information for safe operation, maintenance, and assembly.
	Toro Reelmaster 7000-D Cutting Unit Operator's Manual This manual provides operating instructions and maintenance procedures for the Toro Reelmaster 7000-D cutting units, including the 8, 11-blade 27" and 8-blade 32" EdgeSeries™ DPA cutting units. It covers safety precautions, assembly, specifications, operation, and maintenance.
	Toro Greensmaster Flex 2100 Traction Unit Parts Catalog This parts catalog provides detailed information and diagrams for the Toro Greensmaster Flex 2100 Traction Unit, Model No. 04040, Serial No. 315000001 and Up. It includes part numbers, descriptions, and quantities for various assemblies and components.
	Toro Greensmaster and Sand Pro/Infield Pro Weight Kit Installation Instructions This document provides installation instructions for the Toro Weight Kit (Model No. 100-6442) for Greensmaster 3100, 3120, 3150, and Sand/Infield Pro 3040, 5040 traction units. It includes steps for preparing the machine and attaching the weights.
	Toro Reelmaster 7000-D Operator's Manual This manual provides operating instructions and safety information for the Toro Reelmaster 7000-D with 8- and 11-blade 68.5 cm cutting units and 8-blade 81.2 cm EdgeSeries™ cutting unit with DPA option.