Dear Valued Pioneer Customer: We would like to inform you of the availability of a firmware update (version 8.11) for certain Pioneer audio receivers.
Firmware Update (version 8.11) for Certain Pioneer Audio Receivers August 7th, 2020 Dear Valued Pioneer Customer: We would like to inform you of the availability of a firmware update (version 8.11) for certain Pioneer audio receivers. This firmware update is only for the following Pioneer receivers sold in Australia and New Zealand: DEH-S5250BT, DEH-S4250BT, MVH-S325BT, MVH-S425BT, FH-S820DAB, FH-S725BT and DEH-S720DAB. Warning: Installation on any other product could cause irreversible damage. This firmware update (version 8.11): - Fix an issue that BT pairing information missing. - Fix an issue that song is stopped during USB source playback. - Minor bug fix. In order to perform this update, the following items are needed: · Pioneer receiver: DEH-S5250BT, DEH-S4250BT, MVH-S325BT, MVH-S425BT, FH-S820DAB, FHS725BT and DEH-S720DAB. · Blank USB storage device (no files), 2 GB or larger in capacity, formatted to FAT32 Instructions on installing the firmware are provided on the same page as the firmware update. Installation of the update should take no more than ten minutes to complete. How to Obtain the Free Firmware Update: 1. Download the firmware update files to a computer from the Pioneer website: https://www.pioneer.com.au/firmwaresoftware/ 2. Transfer the files to the USB storage device for insertion into the Pioneer receiver. Questions If you have any questions, please contact Pioneer Customer Service toll free at tech.call.centre@pioneer.com.au, Monday through Friday, 9:00 AM - 5:00 PM, excluding holidays. Sincerely, Pioneer Electronics Australia Pty Ltd.Microsoft Word 2016