Philips Superslim CL550 LED Ceiling Light
Brand: Philips
Safety and Symbols
Please review the following safety information and understand the symbols used in this guide:
- ⚠️ [Warning]: Indicates potential electrical hazards. Handle with care.
- ℹ️ [Information]: Provides important details or instructions.
- B: Refers to a specific connection point or terminal.
- ? [Home]: Suitable for indoor use only.
- ? [Shower]: Not suitable for use in bathrooms or areas with high humidity.
- 3m: Minimum recommended distance from the illuminated surface.
- [Circuit Breaker]: Symbol representing the main power switch.
- [Double Insulation]: Indicates the product has double insulation for safety.
- 3/8" / 8mm: Specifies required dimensions for mounting holes or clearance.
- ❌ [Forbidden Plug]: Do not connect directly to a wall socket using a plug.
- ❌ [Forbidden Hand]: Do not touch exposed electrical parts.
- ? [LED] ↔️ ? [LED] with [Person]: Indicates dimming functionality.
Installation Instructions
Follow these steps carefully to install your Philips Superslim CL550 luminaire.
Step 1: Power Off
Image depicts a finger pressing down a circuit breaker switch clearly labeled "OFF".
Action: Turn off the main power supply at the circuit breaker before proceeding.
Step 2: Prepare Mounting Bracket
Image shows the luminaire being detached from a circular mounting bracket. Arrows indicate the direction of removal.
Action: Carefully detach the luminaire from its mounting bracket.
Step 3: Initial Wire Connections
Image illustrates wires being fed through a connector. The diagram shows specific terminal blocks.
Action: Feed the supply wires through the designated opening and prepare for connection.
Step 4: Position Luminaire
Image shows the luminaire being aligned with the mounting bracket on the ceiling. Arrows indicate alignment and attachment points.
Action: Align the luminaire with the mounting bracket on the ceiling.
Step 5: Secure Luminaire
Image shows screws being inserted to fix the luminaire to the mounting bracket.
Action: Fasten the luminaire securely to the mounting bracket using the provided screws.
Step 6: Prepare Ceiling Mount
Image displays tools such as a drill, screws, and wall anchors, suggesting preparation for ceiling installation.
Action: Prepare the ceiling for mounting by installing appropriate screws or anchors as needed.
Step 7: Connect Wires
A close-up view of wire terminals labeled 'N' for Neutral and 'L' for Live is shown.
Action: Identify and connect the Neutral (N) and Live (L) wires from the supply to the corresponding terminals inside the luminaire.
Step 8: Final Wiring
Image depicts the final electrical connections being made within the luminaire's housing.
Action: Complete all electrical connections within the luminaire, ensuring they are secure and correctly placed.
Step 9: Attach Main Body
Image shows the main body of the luminaire being attached to the mounted base. Arrows indicate how it clicks or locks into place.
Action: Attach the main body of the luminaire to the ceiling-mounted base.
Step 0: Installed View
A diagram illustrating the luminaire successfully installed on a ceiling.
Status: The luminaire is now installed on the ceiling.
Step II: Power On
Image shows a finger pressing up a circuit breaker switch clearly labeled "ON".
Action: Turn on the main power supply at the circuit breaker.
Dimming and Memory Functionality
This luminaire offers adjustable brightness and a memory feature.
Dimming Control
The brightness can be adjusted by cycling the power switch.
100% Brightness: Turn light ON (within 3 seconds).
50% Brightness: Turn OFF then ON (within 3 seconds).
10% Brightness: Turn OFF then ON (within 3 seconds).
Note: To cycle through the dimming levels (100% ➡️ 50% ➡️ 10%), switch the light OFF and then ON again within 3 seconds for each change.
Memory Feature
⏻ [Power Button] Memory feature remembers previous light setting.
Operation:
- ON ➡️ OFF ➡️ ON: The luminaire will revert to the last used brightness setting.
- This memory function is active if the light is switched OFF and then ON again after a period of 5 minutes (≥ 5 mins) or more.
Product Information
Model Numbers:
- 9290025464
- 9290025466
- 9150057767
- 9150057768
- 9150057769
- 9150057779
- 9290026668
- 9290026669
- 9290026672
- 9290026673
Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
Manufacturer/Distributor:
Signify Commercial UK Limited
Unit 3, Guildford Business Park,
Guildford, Surrey, GU2 8XG, UK
I.B.R.S./C.C.R.I. Numéro 10461
5600 VB Eindhoven, the Netherlands
Website: www.philips.com/lighting
© 2021 Signify Holding
[Signify logo]
[Philips logo]
Product Identifier: 3241 653 91733
Last Update: 28/04/21
