Westinghouse Electric Kettle

Safety Information

WARNING! When using electrical appliances, basic safety precautions should always be followed, including the following:

Important Safeguards

Read this instruction manual carefully before using the appliance and keep it for future reference. If you give this product to another person, please also make sure that you give them this instruction manual.

1. Use the appliance only for its intended purpose. Improper use may result in an electric shock, fire or serious injury and may void the warranty.
2. Neither Westinghouse nor the dealer can accept any liability for damage to the appliance or personal injury resulting from failure to observe the correct electrical connection procedures, improper use or incorrect operation.
3. This appliance is for household use only. It is not suitable for commercial, industrial, or outdoor use.
4. Only use the appliance to heat water.
5. This appliance is intended to be used in households and similar applications such as:
   • Staff kitchen areas in shops, offices and other working environments.
   • Farmhouses.
   • Hotels, motels, and other residential type environments.
   • Bed and breakfast type environments.
6. DANGER OF ELECTROCUTION! Do not immerse the kettle, power base, power cord or plug in water or any other liquids. Never place electrical parts of the appliance under running water (see CLEANING AND CARE).
7. This appliance can be used by children aged from eight years and above and by persons with reduced physical, sensory or mental abilities, or lack of experience or knowledge, if they are properly supervised or instructed how to use the appliance in a safe way and understand the hazards involved. Cleaning, operating, maintenance or connecting the appliance to the power supply should not be made by children under the age of eight.
8. KEEP OUT OF REACH OF BABIES AND CHILDREN Water can remain hot for a considerable time after boiling and can be a scald hazard. Keep the kettle, power base and power cord out of the reach of children (under the age of 8).
9. This appliance is not a toy. Children must be supervised to ensure that they do not play with the appliance.
10. Close supervision is necessary when this appliance is used by or near children.
11. Ensure that the water is not filled above the maximum mark (MAX 1.7L / 58 oz) on the kettle.
12. CAUTION! Do not switch the kettle on unless it is filled with the minimum amount of water (MIN 0.5L / 17 oz).
13. Remove the kettle from its power base before filling.
14. CAUTION! Ensure that the lid is fully closed before switching the kettle on. If the lid is not closed correctly, the kettle will not switch off automatically.
15. Before switching the kettle on, check that the kettle is properly placed on the power base and the ON/OFF switch is free from obstructions.
16. Only use the kettle with the power base supplied.
17. The use of accessories or fittings other than the original parts supplied with this appliance may result in an injury, fire or damage and will void the warranty.
18. Never leave the appliance unattended while it is in use.
19. DANGER OF BURNS:
    • Do not touch hot surfaces. Use handles, buttons or knobs.
    • Keep your hands and face at a safe distance from escaping steam and use caution when pouring hot water from the kettle. Pour slowly and do not over tilt the kettle to prevent splashes.
    • Do not open the lid while the kettle is boiling. Do not refill water immediately after boiling. Exercise caution, as escaping steam or hot water that drips from opening the lid may cause scalding.
    • Extreme caution must be used when moving the kettle if it contains hot water.
    • The scalding hazard remains long after the water or liquid has boiled.
20. Follow the cleaning and maintenance instructions detailed in the CLEANING AND CARE section of this instruction manual.
21. Do not use the appliance if it is damaged, dropped or malfunctions. Return the appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.
22. WARNING! Do not attempt to repair the kettle or power base yourself. For servicing and repairs, contact the retail outlet, the manufacturer, or an authorized center.
23. RISK OF SUFFOCATION! KEEP OUT OF REACH OF CHILDREN – Keep all packaging materials out of the reach of babies and children.

Installation Location

1. Place the appliance in a dry location on a firm, level and heat-resistant surface as close as possible to the wall socket.
2. Do not operate the appliance on an inclined surface.
3. Keep the appliance and power cord away from naked flames and hot surfaces such as hotplates, hobs and burners.
4. DANGER OF ELECTROCUTION! Do not place the kettle and power base on an enclosed surface, such as a serving tray, as this could cause water to accumulate under the appliance and create a hazard.
5. DANGER OF ELECTROCUTION! Do not place or use the appliance near water or in humid environments, such as a bathroom, or where water might drip or splash on it.
6. DANGER OF ELECTROCUTION! Never store the appliance where it can fall into a tub or sink. If the appliance falls into water or becomes wet in any way, do not touch it. Disconnect it immediately from the power supply. Then take it to the retail outlet, the manufacturer, or an authorized center.
7. DANGER! KEEP OUT OF THE REACH OF BABIES AND CHILDREN Install the appliance where it cannot be reached by children or pets.

Power Supply

1. Before first use, make sure the power voltage matches the information on the appliance rating label.
2. Only connect the appliance to an earthed wall socket.
3. To avoid overheating, fully unwind the power cord.
4. Do not let the power cord hang over the edge of tables or countertops.
5. A short power cord should be used and arranged to reduce the risk resulting from becoming entangled in or tripping over the power cord. Do not change the power cord to a long power cord or use an extension cord with this product. Have a qualified electrician install a wall socket near the appliance.
6. Arrange the power cord so that no one can catch, trip or step on it accidentally.
7. Do not cover the power cord or place it under a heavy object.
8. Make sure the power cord is not crushed or bent especially where the power cord attaches to the appliance and the plug.
9. If the power cord or plug is damaged, do not use the appliance and return it to the manufacturer, an authorized service agent or a similarly qualified person.
10. Always unplug the appliance from the wall socket when it is not in use, before repositioning, in the event of a thunderstorm or malfunction and prior to cleaning and storing. Allow the kettle to cool down completely before cleaning and storing.
11. Removing the power plug is the only way to separate the appliance completely from the power supply. Make sure the power plug is easily accessible.
12. Disconnect from the power supply by pulling the power plug. Do not pull on the power cord.
13. Do not plug in the power cord or operate the appliance with wet hands or when standing on a wet floor.
14. It is normal for the plug to get warm while the appliance is being used. However, a loose fit between the plug and the outlet may cause overheating. If this occurs, try inserting the plug into a different outlet (socket). An adapter can be used for connecting three-blade, grounding-type plugs to 2-slot outlets (sockets). The grounding plug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available. If the connection is loose or the plug or outlet are damaged in any way, contact a qualified electrician. DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED PLUG.
15. For additional electrical safety, you are advised to use a residual current device (RCD / Safety Switch) with a tripping current not exceeding 30 mA in the household wall outlet supplying power to your appliance. Consult a qualified electrician if you are not sure how to proceed.

How to Use

Description of Parts

The Westinghouse Electric Kettle (Model WKWK3058WH) consists of the following parts:

• 1. Spout: The opening from which water is poured.
• 2. Kettle Body: The main container for water.
• 3. Power Base: The unit that connects to the wall outlet and heats the kettle.
• 4. Lid: Covers the kettle opening.
• 5. Lid Open Button: Used to open the lid.
• 6. Water Level Window: A transparent window showing the water level inside the kettle, marked with minimum (MIN) and maximum (MAX) levels.
• 7. Handle: For safely lifting and carrying the kettle.
• 8. ON/OFF Switch: Controls the power to the kettle. It typically illuminates when the kettle is on.
• 9. Power Cord and Plug: Connects the power base to the electrical outlet.
• 10. Detachable Filter: Located inside the spout area, it helps prevent limescale from entering the cup. (Note: This filter is not shown in the diagram but is mentioned in the text).

NOTE: All images shown are for illustrative purposes only and may not be an exact representation of the product model.

Before First Use

• Remove all packaging materials from the appliance.
• Unpack all parts and check for any damage that may have occurred during transport. If any parts are damaged or missing, do not use the appliance and return it to your retail outlet immediately.
• Rinse the interior of the kettle thoroughly before first use. Fill the kettle up to the MAX mark, boil, and then discard the water. Repeat this process 2-3 times. Finally, rinse the inside with cold water and wipe the outside of the kettle with a soft, damp cloth.

Operating Instructions

1. Remove the kettle from its power base.
2. Press the lid open button to pop up the lid.
3. Fill the kettle with the desired amount of water. Ensure the water level is above the minimum marking (MIN 0.5L / 17 oz) and below the maximum marking (MAX 1.7L / 58 oz) on the water level window.
4. Close the lid by pushing it firmly in place.
5. Place the kettle on the power base, ensuring it is in the correct position.
6. Plug the power cord into the wall socket.
7. Press the ON/OFF switch down towards the 'I' marking to turn on the kettle. The switch illuminates when the kettle is on and turns off when the kettle is off. The kettle will switch off automatically when the water has boiled.
8. To manually switch off the kettle at any time, lift the ON/OFF switch up towards the 'O' marking.
9. Unplug the kettle from the wall socket when it is not in use.

CAUTION:

• Do not overfill the kettle, as boiling water may splash out from the spout or lid, resulting in scalding.
• Ensure that the ON/OFF switch is clear of obstructions and that the lid is properly closed. The kettle will not switch off automatically if the ON/OFF switch is obstructed or the lid is open.
• Never open the lid while the water is boiling.
• Always switch off the kettle before removing it from the power base.

NOTE: Do not worry if moisture appears on the power base. It is condensation from the steam that is released to trigger the automatic off switch on the kettle.

Boil Dry Cut-Off Protection

If the kettle is accidentally switched on when empty or with insufficient water, the boil dry feature will automatically cut off the power supply. Lift the kettle from the power base and let it cool down before refilling it with water. Fill the kettle with water up to the MAX marking to reset the boil dry protection.

Avoid boiling the kettle dry to prevent damage to the appliance and shorten its lifespan.

CAUTION: Always unplug the appliance from the wall socket and let it cool down before cleaning. Do not immerse the kettle, power base, or power cord in water or other liquids. Never rinse them under the tap or expose them to moisture. Never use solvents, chemical or abrasive cleaning agents.

Cleaning and Care

General Cleaning

1. Remove the kettle from the power base. Empty the kettle and rinse the inside thoroughly with water.
2. Wipe the outside of the kettle and the plastic parts of the power base with a soft cloth moistened with water or mild detergent. Dry completely with a soft, dry cloth.

NOTE: Ensure that all connectors and sockets are kept dry.

Cleaning the Scale Filter

Depending on the hardness of the water in your area, scale present in tap water may give your drinking water a cloudy or white appearance. The scale filter in your kettle helps prevent scale particles from being poured into your drink. Clean the scale filter regularly, especially when there are visible mineral deposits and pouring is affected.

To clean the scale filter:

1. Press the lid open button to open the lid.
2. Insert your fingers into the kettle and remove the scale filter.
3. Clean the scale filter with a soft brush under the tap and rinse thoroughly.
4. Reattach the scale filter to the kettle after cleaning.

Descaling

Descale your kettle regularly to maintain efficient performance. Limescale and hard mineral deposits may build up inside the kettle over time, which slow down the boiling process.

To descale with a commercially available descaling solution:

• Choose a descaler suitable for plastic kettles and follow the package instructions.
• Make sure you rinse the kettle fully after descaling to flush out any chemical residues.

To descale with white vinegar:

1. Press the lid open button to open the lid.
2. Insert your fingers into the kettle and remove the scale filter.
3. Fill the kettle with 1L / 34 oz of water and boil.
4. Add 0.7L / 24 oz of white vinegar so the liquid reaches the MAX marking. Do not boil.
5. Immerse the scale filter in the vinegar solution.
6. Leave the vinegar solution in the kettle overnight.
7. Discard the vinegar solution the next morning and rinse the inside of the kettle thoroughly.
8. Clean the scale filter with a soft brush under the tap and rinse thoroughly.
9. Reattach the scale filter to the kettle after cleaning.
10. Fill the kettle with fresh water up to the MAX marking. Bring to a boil and then discard the water. Repeat a few times.

Descale your kettle once every 3 months if you live in an area with soft water, or once every month if you live in an area with hard water. Regular descaling ensures proper function, product longevity and saves energy.

Tips to reduce scale buildup

• Empty the kettle of water after each use.
• Do not allow water to stand overnight in the kettle.
• Use filtered water instead of tap water or mineral water.

NOTE:

• Always clean the appliance before storing it for a long time.
• Store the appliance in its original packaging in a cool, dust-free, dry environment away from direct sunlight.

Disposal

Proper disposal of this product.

This symbol ♻️ indicates that this appliance should not be treated as household waste. Instead, it should be taken to an appropriate collection point for the recycling of electrical and electronic equipment.

Please use the return or collection systems available in your municipality or contact the retailer from whom you purchased this product.

Information and Service

If you have questions or concerns about your product, please visit our website:

https://info.westinghousehomeware.com/

In line with our policy of continuous product development, Westinghouse reserves the right to change product, packaging, and documentation specifications without notice.