Single Patio Chair Assembly Instructions

WARNING

Proper use of the chair is for single person seating only. The chair is not to be used for standing purposes and will not function as a step-ladder. Use on even surfaces only. Ottoman tested for use at weight of 250 lbs. Improper use of this product or failure to use as directed may result in injury.

IMPORTANT

Please read all the instructions and warnings before assembling. In order to make the whole product adjust to the best, please install all the screws on the product before fully tighten and note to put the washer to the screw before putting the screw into the screw hole.

SAFETY INFORMATION

Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.
Check all bolts for tightness before use, IMPORTANT-check and tighten bolts often to keep them secure!
The chair is not to be used for standing purposes and will not function as a tool or step-ladder. Use on even surfaces only.

CARE & MAINTENANCE

STAIN RESISTANT CUSHIONS CARE: KEEP THE CUSHIONS IN STORAGE IN RAINY DAYS

SPILLS: Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone. Allow cushion to air dry.
FABRIC CARE: Hand wash only, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.
RESIN WICKER PRODUCT CARE: Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time nuts and bolts can loosen. Occasionally, check nuts and bolts on furniture, re-tighten if necessary.

Part List

A Right Chair Arm x 1
B Left Chair Arm x 1
C Back Panel x 1
D Seat Panel x 1
E Seat Cushion x 1
F Back Cushion x 1

Hardware

1 Bolt M6 x 15 x 2
2 Bolt M6 x 30 x 4
3 Bolt M6 x 40 x 4
4 Washer M6 x 10

Tools Required

5 Ratchet Allen Key x 1 (Provided)

Assembly Information

1 Person Assembly

250 lbs Capacity

ASSEMBLY TIP:

Please screw the parts together at 50% loose, it will help you assemble them easily. When all the parts are assembled together, tighten the screws up 100% in the end to make the product stable.

STEP 1

Attach Seat Panel (D) and Back Panel (C) to Right Chair Arm (A) using Bolts (1)&(2)&(3) and Washers (4) as shown. Tighten the screws up 50% for now.

Diagram Description: The diagram shows the Right Chair Arm (A) being connected to the Seat Panel (D) and Back Panel (C). Bolts (1, 2, 3) and Washers (4) are used for this connection. The diagram also shows a close-up of the connection points with numbers indicating the hardware and parts involved.

	Rocker Swivel Chair Safety and Care Instructions Essential safety information, assembly guidelines, and care instructions for the Unbranded Single Rocker Swivel Chair. Learn how to properly use, maintain, and clean your chair for optimal longevity and safety.
	Yellow 3-Piece Metal Round Outdoor Bistro Set - Dimensions and Features Detailed dimensions and features of the Yellow 3-Piece Metal Round Outdoor Bistro Set, designed for portability, simplicity, and stability. Includes table and chair specifications.
	Assembly Instructions and Care Guide for Outdoor Furniture Set Comprehensive guide for assembling and maintaining your outdoor furniture set, including step-by-step instructions, safety precautions, and care tips.
	Outdoor Loveseat with Cushions - Dimensions and Specifications Detailed dimensions and specifications for an outdoor loveseat, including cushion sizes and overall furniture measurements. Features a durable aluminum frame and comfortable cushions.
	Bar Stool Dimensions and Specifications Detailed specifications and dimensions for a stylish bar stool, featuring a blue and white patterned seat and a durable woven-look frame. Includes measurements for overall height, seat dimensions, armrest height, and base.
	Round Cast Aluminum Patio Dining Table - Ornate Design An elegant round dining table designed for outdoor spaces, featuring a durable cast aluminum construction with an intricate, ornate tabletop pattern and decorative leg supports. Ideal for patios, gardens, or balconies, this table offers both style and functionality for outdoor dining and gatherings.
	CH215-WJ Assembly Instructions Assembly instructions for the CH215-WJ chair, including parts list, installation steps, functions display, FAQs, and safety information.
	Assembly Instructions for Unbranded 748F Black Metal Canopy Bed Detailed assembly instructions for the Unbranded 748F Black Metal Canopy Bed, featuring a vintage style headboard and footboard. Includes a comprehensive parts list and step-by-step visual guidance for easy setup.