User Manual for workwell TECHNOLOGIES models including: JL2500, 2A8EK-JL2500, 2A8EKJL2500, Cloud Time Clock, JL2500 Cloud Time Clock, Time Clock, Clock

User Manual

Workwell Technologies, Inc. JL2500 2A8EK-JL2500 2A8EKJL2500 jl2500

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
  

  File Info : application/pdf, 5 Pages, 1.36MB

  Document Document

uAttend Cloud Time CIock
Descriotion:
uAttend time clocks work in conjunction with the online cloud account and allows customers to automate their time and attendance management.Employees use the time clocks to record their punch times which are then sent to the online account,while the uAttend online account gives cusomers the ability to streamline their processes using the system's automated time card calculation engine.
Time Clock Features:
· Allows employees to authenticate for time and attendance punching by scanning a fingerprint,RFID of entering a unique personal identification number(PIN)
Allows employees to perform In/Out,Break/Lunch,Department transfer and job
punches on the time clock. Connects to the internet using WiFior Erhernet. ·Captures and sends real-time punches to the uAttend online account. Time clock works in conjunction with uAttend online account to track time by pay
period,automate rules,and run advanced calculations for exporting time data to payroll systems.

To maintain compliance with FCC' s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2A8EK-JL2500

Linux Device Function Test Ilustration
Note: The function test mainly tests whether led, fingerprintmodule, speaker, wifi, and Ethernet work properly. The pre-installed application TestForMost willcomplete the test, observe the working status of the device and application to determinewhether the
corresponding module works properly. Click test app to start the test on the desktop:
Application button description (blue font is button description)
1.Wifi Test-Test Wifi Functions
Click the button "WiFi test" to enter the WiFi test interface, click the wifi on/off button, and open WiFi to search the nearby WiFi, that is, WiFi works normally, and if cannot be opened,or the
nearby WiFi can not be searched, which is abnormal.
2.Ethernet Test-Test Ethernet Module
Click the button "Ethernet Test" to enter the Ethernet test interface, insert the network cable from the network cable interface at the rear of the device, click the switch to turn on the Ethernet, and the IP address can be obtained normally, and the network can be used without WiFi connection which is normal
3. Fingerprint Head Test-Test Fingerprint Module
Click the"fingerprint device test"button to enter the fingerprint head test interface. Press the fingerprint module position with your finger to check whether the device can read the user's fingerprint normally.

4.RFID Test-Test RFID
Click the button "RFID" to enter the RFID test interface, move the card with ID information nearthe coil position,and check whether the device can read the card ID information normally.