ClonerAlliance CA-989UP UHD Pro Standalone User Manual

User Manual for ClonerAlliance models including: CA-989UP UHD Pro Standalone, CA-989UP, UHD Pro Standalone, Pro Standalone, Standalone

User Manual (PDF)

Amazon.com: ClonerAlliance UHD Pro, 4K Video Recorder, HDMI Capture DVR with H.265/H.264 Codec, Cinematic 4K@24fps Recording(Up to 4K@30fps), No PC Required. : Patio, Lawn & Garden

ClonerAlliance UHD Pro, 4K Video Recorder, HDMI Capture DVR with H.265/H.264 Codec, Cinematic 4K@24fps Recording(Up to 4K@30fps), No PC Required. : Patio, Lawn & Garden

File Info : application/pdf, 101 Pages, 2.99MB

B1E 4xvWglL

ClonerAlliance UHD Pro User Manual

ClonerAlliance UHD Pro User Manual
This documentation describes how to use ClonerAlliance UHD Pro (Model: CA-989UP) device.
Copyright Notice
Copyright © ClonerAlliance Inc. All rights reserved.
Documentation Version 1.0.3
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of ClonerAlliance Inc.
Trademarks
ClonerAlliance is a registered trademark of ClonerAlliance Inc.

Safety Notices
Before using ClonerAlliance UHD Pro, please ensure that you read and understand the safety precautions below:
1. Do not attempt to open the case of ClonerAlliance UHD Pro or modify it in any way, as this will void the warranty.
2. Keep ClonerAlliance UHD Pro away from water and other liquids, as this may cause the unit to malfunction.
3. ClonerAlliance UHD Pro may become warm during use. This does not indicate malfunction.
4. Do not place heavy objects on ClonerAlliance UHD Pro, as this may cause the unit to overheat and malfunction.
5. If the exterior of ClonerAlliance UHD Pro requires cleaning, wipe it with a soft dry cloth.
6. Do not dispose of the unit via conventional domestic waste.

CONTENTS

1 Getting Started

1.1 Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

1.2 Product Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

1.3 Indicator Color Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

1.4 Remote Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

2 OSD Summary

2.1 DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

2.2 Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

3 Record videos to the USB storage device

3.1 Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3.2 Record videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

3.3 Take Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

3.4 Record live commentary or voice-over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

4 Playback the Recorded Media files

4.1 Playback the Recorded media files on ClonerAlliance UHD Pro directly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

4.2 Playback the Recorded media files on TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

4.3 Playback/Edit the Recorded media files on PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

5 Schedule Recording

5.1 Set the system time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

5.2 Set the schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

6 Software Installation

6.1 Install and register ClonerAlliance Helper (Windows Users) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

6.2 Install and register MP4-Cloner (Windows Users). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

6.3 Install VLC player (Windows, Mac, and Linux Users) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 6.4 Install OBS Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

7 Record and Trim/Combine/Convert videos on PC

7.1 Install Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

7.2 Record/Capture videos on PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

7.3 Trim video files on PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 7.4 Combine video files on PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 7.5 Convert video files on PC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

8 Preview videos for live streaming

8.1 Connection Guide of ClonerAlliance UHD Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

8.2 Install ClonerAlliance Helper or OBS Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 8.3 Setting for live stream in ClonerAlliance Helper (Windows) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 8.4 Setting for preview video in OBS studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

9 Frequently Asked Questions

10 Product Specifications

11 After Sales Warranty

12 Contact Us

13 Disclaimer

1.1 Box Contents

GETTING STARTED

C D

· a. Power Adapter · b. Remote Control · c. ClonerAlliance UHD Pro

· d. User Manual · e. Micro B to USB cable · f. HDMI cable
1

1.2 Product Diagram

ClonerAlliance UHD Pro User Manual

1.2. Product Diagram

ClonerAlliance UHD Pro User Manual
1. Line In: Stereo audio inputs. 2. Line Out: Insert the headphone plug into this jack to output the video sound. 3. Mic: Insert the microphone plug into this jack to input voice. 4. IR Window: Receives the IR signal from the remote control. 5. Switch button of H.264/H.265. 6. Snapshot button. 7. Rec/Stop button.

1.2. Product Diagram

ClonerAlliance UHD Pro User Manual

8. Power ON/OFF button. 9. Power socket of 5V/2A. 10. OUT: Connect an HDMI cable between ClonerAlliance UHD Pro and TV. 11. IN: Connect an HDMI cable between the video player and ClonerAlliance UHD Pro.

1.2. Product Diagram

ClonerAlliance UHD Pro User Manual

12. To PC: Connect the Micro-USB to USB cable between PC and ClonerAlliance UHD Pro for recording videos to PC. Tip: This function above must be realized with software. For Windows system, please use ClonerAlliance Helper/OBS etc, For Mac/Linux system, please use OBS. 13. Storage: Insert a USB flash drive or mobile hard disk and record videos to this storage medium.

1.2. Product Diagram

1.3 Indicator Color Diagram

ClonerAlliance UHD Pro User Manual

14. Top indicator. 15. Side indicator.

1.3. Indicator Color Diagram

1. Top indicator

ClonerAlliance UHD Pro User Manual

· Color: Stable BLUE · Status: Output and Recording Resolution is 4K@30Hz

1.3. Indicator Color Diagram

ClonerAlliance UHD Pro User Manual

· Color: Stable GREEN · Status: Output and Recording Resolution is 1080p@60Hz or Below

1.3. Indicator Color Diagram

ClonerAlliance UHD Pro User Manual

· Color: Blink BLUE&GREEN Alternately · Status: No Input/Unsupported Input

1.3. Indicator Color Diagram

2. Side Indicator

ClonerAlliance UHD Pro User Manual

· Color: Stable BLUE · Status: Encoding Format is H.264

1.3. Indicator Color Diagram

ClonerAlliance UHD Pro User Manual

· Color: Stable GREEN · Status: Encoding Format is H.265

1.3. Indicator Color Diagram

ClonerAlliance UHD Pro User Manual

· Color: OFF · Status: No Storage Device Connected

1.3. Indicator Color Diagram

1.4 Remote Diagram

ClonerAlliance UHD Pro User Manual

CLONER ALLIANCE
UHD PRO
www.cloner-alliance.com

REC/STOP. DISPLAY. Snapshot.
OK button. Up arrow. Down arrow. Left arrow. Right arrow.
Menu. Back button. Start or stop playing. Video playback. Image playback. Delete recorded files. Volume down for Mic. Volume up for Mic. Mute or unmute for Mic. Volume down. Volume up. Mute or unmute for audio output.

Tips: The remote control is powered by 2 AAA batteries which are not included and need to be purchased independently.

1.4. Remote Diagram

2.1 DISPLAY

Please press

button on remote to display media information OSD.

· Display OSD

OSD SUMMARY

2.2 Settings Menu

ClonerAlliance UHD Pro User Manual

Please press

button on remote to display settings menu.

· Show up the Settings Menu

2.2. Settings Menu

1. Record settings

ClonerAlliance UHD Pro User Manual

·Format H.264 (AVC) H.265 (HEVC)
·Bitrate Bitrate set to Low
* H.264: UHD 16Mbps, FHD 12Mbps, HD 8Mbps, SD 4Mbps * H.265: UHD 12Mbps, FHD 8Mbps, HD 6Mbps, SD 4Mbps
Bitrate set to High
* H.264: UHD 20Mbps, FHD 16Mbps, HD 12Mbps, SD 8Mbps

2.2. Settings Menu

ClonerAlliance UHD Pro User Manual
* H.265: UHD 16Mbps, FHD 12Mbps, HD 8Mbps, SD 4Mbps
The bitrate can be set, the compression bitrate is related to the video compression format and resolution.
·Always display REC ON: It will always display "REC"during recording. OFF: "REC"only shows up at the beginning of recording, and will disappear in a few seconds
·File size 16GB/3H: Single file max size up to 16GB or 3 hours 2GB/3H: Single file max size up to 2GB or 3 hours 4GB/3H: Single file max size up to 4GB or 3 hours
TIP: Using FAT32 USB storage devices, the single recorded file will be 4GB at most due to the limitation of FAT32 format.
·Time Watermark ON: It will display time watermark during recording. OFF: No time watermark displayed on screen.
·Loop recording ON: Enable loop recording. Under this setting, when the USB storage device is full, it will keep recording and previous files will be overwritten. OFF: Disable loop recording. Under this setting, when the USB storage device is full, it will stop recording automatically.

2.2. Settings Menu

2. Schedule settings

ClonerAlliance UHD Pro User Manual

·Schedule ON: Enable schedule recording. OFF:Disable schedule recording.

2.2. Settings Menu

·Schedule mode : Once Every Day
·Time ranges Max task number is up to 3
3. System settings

ClonerAlliance UHD Pro User Manual

·Language English Simplified Chinese.
·System time yyyy-mm-dd hh-mm

2.2. Settings Menu

ClonerAlliance UHD Pro User Manual
·Playback loop Single file: Play a single file in a loop. Full list: Play the whole file list in a loop. OFF: Disable playback loop function.
·Reset Restore Factory Default Settings.
·Version Firmware version is only for developers'references.
4. Video playback
After recording, make sure USB flash drive is connected to ClonerAlliance UHD Pro. Press MENU button on remote and select "Video playback"or press VIDEO button on remote to enter "Video playback"interface directly.

2.2. Settings Menu

ClonerAlliance UHD Pro User Manual

Choose the file you want to play back by using the four arrow buttons on the remote control, and press PLAYBACK button on remote to start/pause playback. You also can enter fullscreen by pressing OK button on the remote control.

2.2. Settings Menu

ClonerAlliance UHD Pro User Manual

2.2. Settings Menu

ClonerAlliance UHD Pro User Manual
5. Photo playback
ClonerAlliance UHD Pro supports photo playback, please press MENU button on remote and select "Photo playback"or press IMAGE button on remote to enter "Photo playback"interface directly.

Select the photo you desired by using the four arrow buttons on the remote control. It will display fullscreen by pressing OK button.

2.2. Settings Menu

ClonerAlliance UHD Pro User Manual

2.2. Settings Menu

RECORD VIDEOS TO THE USB STORAGE DEVICE 3.1 Connect
1. Connect the video player to IN port on ClonerAlliance UHD Pro via an HDMI cable. 2. Connect ClonerAlliance UHD Pro from OUT port to TV via an HDMI cable. 3. Plug the USB storage device into ClonerAlliance UHD Pro. 4. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of ClonerAlliance UHD Pro. 5. Power on ClonerAlliance UHD Pro after all devices and cables are well connected.
25

ClonerAlliance UHD Pro User Manual
Tips:
Please use a premium USB flash drive or mobile hard disk with high speed to avoid unexpected problems such as file loss.
3.2 Record videos
You can select to use the function buttons on ClonerAlliance UHD Pro to record or use the remote of ClonerAlliance UHD Pro to record. Please check out details below.
· Record videos with the buttons on the front panel of ClonerAlliance UHD Pro
1. Power on all devices, the video image from the video player will be displayed on TV and the LED will illuminate solid blue or solid green. Solid blue indicates the output resolution is 4K30 and solid green indicates the output resolution is 1080p60 or below. If the top LED is blinking blue and green alternately, that indicates there is no input signal detected.
2. Before recording, you can easily switch to H.264 or H.265 by pressing H.264/H.265 button on the front panel of ClonerAlliance UHD Pro. This option should be done with USB storage device connected to ClonerAlliance UHD Pro.
3. Press the Rec/Stop button on ClonerAlliance UHD Pro, then the LED will blink blue or green, which indicates ClonerAlliance UHD Pro is in the process of recording.

3.2. Record videos

ClonerAlliance UHD Pro User Manual

4. Press the Rec/Stop button again on ClonerAlliance UHD Pro, then the LED will blink blue/green alternately, which indicates the recorded video is being saved.
5. When the LED turns solid blue or solid green from blinking blue/green alternately, it indicates the video has been saved successfully.
6. You can playback the recorded files on ClonerAlliance UHD Pro directly or on PC or on a smart TV.
· Record videos with the remote included with ClonerAlliance UHD Pro

3.2. Record videos

ClonerAlliance UHD Pro User Manual
1. Power on all devices, the video image from the video player will be displayed on TV and the LED will illuminate solid blue or solid green. Solid blue indicates the output resolution is 4K30 and solid green indicates the output resolution is 1080p60 or below. If the top LED is blinking blue and green alternately, that indicates there is no input signal detected.
2. Before recording, you can easily switch to H.264 or H.265 by pressing H.264/H.265 button on the front panel of ClonerAlliance UHD Pro. This option should be done with USB storage device connected to ClonerAlliance UHD Pro.

3. Press the Rec/Stop button on the Remote of ClonerAlliance UHD Pro, then the LED will blink blue or green, which

3.2. Record videos

indicates the capture box is in the process of recording.

ClonerAlliance UHD Pro User Manual

4. During recording process, you can adjust the volume of HDMI IN at any time. If you got Mic connected, you also can adjust the volume of Mic during recording by pressing the volume up/down button on the Remote.

3.2. Record videos

ClonerAlliance UHD Pro User Manual
5. Press the Rec/Stop button again on the Remote, then the LED will blink blue/green alternately, which indicates the recorded video is being saved.
6. When the LED turns solid blue or solid green from blinking blue/green alternately, it indicates the video has been saved successfully.
7. You can playback the recorded files on ClonerAlliance UHD Pro directly or on PC or on a smart TV.
Note: DO NOT remove the USB storage drive from ClonerAlliance UHD Pro in the process of recording (Flashing Blue/Green LED indicates it's still in the process of recording.)

3.3 Take Snapshots

1. Using the Remote included with ClonerAlliance UHD Pro to take a snapshot. Press on the remote control to take a snapshot.
2. Using the buttons on the front panel of ClonerAlliance UHD Pro. Press "Snapshot"button on the front panel of ClonerAlliance UHD Pro to take a snapshot. You can playback the snapshots on ClonerAlliance UHD Pro directly or on PC or on smart TV.

3.3. Take Snapshots

ClonerAlliance UHD Pro User Manual
3.4 Record live commentary or voice-over
ClonerAlliance UHD Pro can capture and mix dual audio channels coming from game console and your microphone. Capture your live commentary with the microphone jack, which is built into ClonerAlliance UHD Pro. Plug a microphone and then capture your gameplay with your live voice!

· Connect MIC

3.4. Record live commentary or voice-over

ClonerAlliance UHD Pro User Manual It is compatible with most 3.5mm audio standard MICs, you can mix your voice into source video.

It will be shown in display OSD as "MIC ON"

3.4. Record live commentary or voice-over

ClonerAlliance UHD Pro User Manual
· Connect Line in Line in socket is compatible with 3.5mm audio connector, such as audio mix device, mp3 players and cell phones.
You can easily mix audio via "Line in"by using 3.5mm audio cable connected to audio devices.

3.4. Record live commentary or voice-over

ClonerAlliance UHD Pro User Manual

After connected audio device to "Line in", it will directly mix audio to HDMI embedded audio. It also can be monitored from "Line out"and output devices.
· Adjust Mic volume using the Remote You can press volume up/down button on the Remote control of ClonerAlliance UHD Pro to adjust the volume of Mic.
The up/down buttons on the Remote control:

3.4. Record live commentary or voice-over

PLAYBACK THE RECORDED MEDIA FILES 4.1 Playback the Recorded media files on ClonerAlliance UHD
Pro directly
· Connect 1. Connect the video player to "In"port on ClonerAlliance UHD Pro via an HDMI cable. 2. Connect ClonerAlliance UHD Pro from "Out"port to TV via an HDMI cable. 3. Plug the USB storage device into the "Storage"port of ClonerAlliance UHD Pro. 4. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of ClonerAlliance UHD Pro.
35

ClonerAlliance UHD Pro User Manual
After all devices are connected properly, plug the USB storage device into ClonerAlliance UHD Pro and press the"VIDEO" or "IMAGE"button on the remote control to enter the playback menu interface. You will see the file list.
· Video playback

· Image playback

4.1. Playback the Recorded media files on ClonerAlliance UHD Pro directly

ClonerAlliance UHD Pro User Manual

· Fullscreen playback
Select your desired file by using the four arrow buttons on the remote control. You can preview the files and press "OK"button to fullscreen playback.

4.1. Playback the Recorded media files on ClonerAlliance UHD Pro directly

ClonerAlliance UHD Pro User Manual

· ATTENTION If you got similar situations as below, please click here to reformat your USB external hard drive, the issue can be fixed immediately.
1. When using ClonerAlliance UHD Pro, you cannot use the remote to playback the recorded video after recording. To be more specific, you can use ClonerAlliance UHD Pro to record videos successfully, but you can't playback it with the remote.
2. During the process of recording, ClonerAlliance UHD Pro stops recording abnormally.

4.1. Playback the Recorded media files on ClonerAlliance UHD Pro directly

ClonerAlliance UHD Pro User Manual
· Quick solutions If you got problems in the process of playback, please try the steps below:
1. Please make sure that your USB stick/external hard drive works well. You can change another one to confirm it or format it to resolve it.
2. Please adjust resolution to test again. 3. If the methods don't work, refer to the link above to format your USB stick/external hard drive to fix it.
4.2 Playback the Recorded media files on TV
· Connect
1. Plug the USB flash drive to the USB socket of a smart TV which has built-in media file playback function. 2. Power on the smart TV
· Steps
1. After files are successfully saved to USB flash drive, plug the USB flash drive to the USB socket of a smart TV which has built-in media file playback function.

4.2. Playback the Recorded media files on TV

ClonerAlliance UHD Pro User Manual

2. Launch USB device on smart TV, then playback the files ClonerAlliance UHD Pro recorded.

4.2. Playback the Recorded media files on TV

ClonerAlliance UHD Pro User Manual
4.3 Playback/Edit the Recorded media files on PC
· Connect 1. Plug the USB flash drive to the USB socket of PC. 2. Launch USB flash drive on PC. · Steps: 1. Playback the recorded video files with VLC media player. Please download VLC media player software and install it on your PC first. See details about Install VLC player (Windows, Mac, and Linux Users) 2. Edit the recorded video files with MP4-Cloner Please download MP4-Cloner software and install it on your PC first. See details about Install and register MP4-Cloner (Windows Users)

4.3. Playback/Edit the Recorded media files on PC

5.1 Set the system time

SCHEDULE RECORDING

Press the "MENU"button on the remote control. Select "System Settings"on the OSD menu. Set the "System time" by using the four arrow buttons on the remote control. Then press the "OK"button on remote to save it. Then press the "BACK"button on the remote to exit the "System Settings".

5.2 Set the schedule

ClonerAlliance UHD Pro User Manual

Go into the "Schedule Settings", set the schedule mode, start time, and end time by using the four arrow buttons on the remote control. Then press"OK"to save the scheduled task and then press"BACK"button on the remote to exit"Schedule Settings".

Then ClonerAlliance UHD Pro will start to record videos automatically at the scheduled time. Note: If you want to record certain TV channel's video, do select the TV channel first.

5.2. Set the schedule

SOFTWARE INSTALLATION 6.1 Install and register ClonerAlliance Helper (Windows Users)
1. Install ClonerAlliance Helper NotePrior to installing ClonerAlliance Helper, please make sure you are using Windows 7 or later versions and your PC is equipped with USB 2.0 or 3.0 port.
· Download ClonerAlliance Helper software from https://static.cloner-alliance.com/download/cloneralliance-helper.exe · Double click the installation file and the setup wizard window will pop up. Follow the installation wizard to complete
the installation process. You do not have to restart your computer after the installation is complete.
· Connect ClonerAlliance UHD Pro with other devices. 44

ClonerAlliance UHD Pro User Manual
1. Connect the video player to the In port on ClonerAlliance UHD Pro via an HDMI cable. 2. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of ClonerAlliance UHD Pro. 3. Connect the Micro-USB to USB cable between the "To PC"port of ClonerAlliance UHD Pro and the USB port of
PC.

6.1. Install and register ClonerAlliance Helper (Windows Users)

ClonerAlliance UHD Pro User Manual
After all devices have been connected properly, please power on all connected devices. The Windows operating system will prompt "Found a new hardware"and install the driver automatically. Please make sure ClonerAlliance UHD PRO is connected successfully and"CA-989UP UAC/UVC"appears in the Device Manager (Right click My Computer Manage System Tools Device Manager). If"CA-989UP UAC/UVC"doesn't appear in the list, please re-connect ClonerAlliance UHD Pro and try again.

2. Register ClonerAlliance Helper

Please register ClonerAlliance Helper first before using, otherwise it can only be used for 7 days. Launch ClonerAlliance

6.1. Install and register ClonerAlliance Helper (Windows Users)

ClonerAlliance UHD Pro User Manual
Helper. Click "Input registration code" button in the auto pop-up Register window. Fill in your proper Email address, real name and code. Then click "OK" to finish the registration.

Scan the QR code below or visit https://www.cloner-alliance.com/register/ to get your registration code of ClonerAlliance Helper. The S/N of ClonerAlliance UHD Pro is in the form of CXXXXXXXXX.

XXXXXXXXX
(a) Click.Here
For more details about registering ClonerAlliance Helper, visit here to read step by step instructions.

6.1. Install and register ClonerAlliance Helper (Windows Users)

ClonerAlliance UHD Pro User Manual
6.2 Install and register MP4-Cloner (Windows Users)
1. Install MP4-Cloner MP4-Cloner is a versatile program to edit MP4 video files recorded with our video capture tool. It enables you to trim, combine, convert and burn your MP4 videos.

6.2. Install and register MP4-Cloner (Windows Users)

ClonerAlliance UHD Pro User Manual
· Download MP4-Cloner software from https://static.cloner-alliance.com/download/mp4-cloner.exe · Double click the installation file and the setup wizard window will pop up. Follow the installation wizard to complete
the installation process.

Note: Prior to installing MP4-Cloner, please make sure you are using Windows 7 or later versions and your PC is equipped with USB 2.0 or 3.0 port.

2. Register MP4-Cloner

Once ClonerAlliance Helper is registered successfully, then MP4-Cloner will be registered automatically at the same time

6.2. Install and register MP4-Cloner (Windows Users)

ClonerAlliance UHD Pro User Manual (Click on the "i"button of MP4-Cloner, and you can check the registration information).

For more details about registering bundled software of ClonerAlliance products, visit here to read step by step instructions.

6.2. Install and register MP4-Cloner (Windows Users)

ClonerAlliance UHD Pro User Manual
6.3 Install VLC player (Windows, Mac, and Linux Users)
VLC is a free and open source cross-platform multimedia player and framework that plays most multimedia files as well as DVDs, Audio CDs, VCDs, and various streaming protocols. Download and start streaming quickly and easily on Windows, Mac or Linux. Please install VLC and run it on your computer. Tip: You can click here to download VLC.

6.3. Install VLC player (Windows, Mac, and Linux Users)

6.4 Install OBS Studio

ClonerAlliance UHD Pro User Manual

Please install Open Broadcaster Software (OBS Studio) and run it on your computer. If you are Mac/Linux users, please download OBS Mac/Linux version accordingly.
Tip: You can click here to download Open Broadcaster Software (OBS Studio).

6.4. Install OBS Studio

ClonerAlliance UHD Pro User Manual

6.4. Install OBS Studio

RECORD AND TRIM/COMBINE/CONVERT VIDEOS ON PC 7.1 Install Software
·ClonerAlliance Helper Please download ClonerAlliance Helper software and install it on your PC first. See details about Install and register ClonerAlliance Helper (Windows Users)
·MP4-Cloner Please download MP4-Cloner software and install it on your PC first. See details about Install and register MP4-Cloner (Windows Users)
54

7.2 Record/Capture videos on PC

ClonerAlliance UHD Pro User Manual

HDMI IN HDMI OUT

1. After all devices are connected properly, power on the video source device and launch ClonerAlliance Helper on PC. · When you use ClonerAlliance UHD Pro for the first time, you may see the following color bars screen:

7.2. Record/Capture videos on PC

ClonerAlliance UHD Pro User Manual

It's quite easy to fix it. Please click here to find the answer. 2. If everything is ok and you will see the image of the video source as below:

7.2. Record/Capture videos on PC

ClonerAlliance UHD Pro User Manual

3. Click

to start recording.

7.2. Record/Capture videos on PC

ClonerAlliance UHD Pro User Manual

4. Click

Software interfaces may vary depending on the version. to stop recording.

7.2. Record/Capture videos on PC

ClonerAlliance UHD Pro User Manual
Tip: During recording, you can also click to pause at anytime. When you want to resume, please click to continue recording. Besides, you can Click to take screenshots, click to capture GIF animation.

5. After recording, click to view the captured files, then double click the files to play back directly.

7.2. Record/Capture videos on PC

ClonerAlliance UHD Pro User Manual

6. ClonerAlliance Helper also supports recording videos at the scheduled time. Click window. Then click the "+" button.
7.2. Record/Capture videos on PC

to enter the "Setup" 60

ClonerAlliance UHD Pro User Manual
Please enable schedule recording first, and set the recording duration, starting time and repeat mode for schedule recording. Then click "OK". Then videos will be recorded automatically at the scheduled time.

7.2. Record/Capture videos on PC

7.3 Trim video files on PC

ClonerAlliance UHD Pro User Manual

·Step 1: Launch MP4-Cloner and click on the "Trim"button.

·Step 2:

7.3. Trim video files on PC

ClonerAlliance UHD Pro User Manual Click on the "Add"button to add a MP4 video. Set the start and end time and then click on the "Start"button.

·Step 3: Affirm the configuration. Click on the "Browse"button to set the video name and saving path. You can choose
the audio codec from Keep AAC, AC3 and MP3.

7.3. Trim video files on PC

ClonerAlliance UHD Pro User Manual

·Step 4: It will start trimming.

7.3. Trim video files on PC

·Step 5: Completed!

ClonerAlliance UHD Pro User Manual

7.3. Trim video files on PC

7.4 Combine video files on PC

ClonerAlliance UHD Pro User Manual

·Step 1: Launch MP4-Cloner and click on the "Combine"button.

·Step 2:

7.4. Combine video files on PC

ClonerAlliance UHD Pro User Manual
Click on the "Add"button to add at least two MP4 videos to the list and click on the "Browse"button to set the video name and saving path. Then select the audio codec from AAC, AC3 and MP3 and then click on the "Start"button.

·Step 3: It will start combining.

7.4. Combine video files on PC

·Step 4: Completed!

ClonerAlliance UHD Pro User Manual

7.4. Combine video files on PC

7.5 Convert video files on PC

ClonerAlliance UHD Pro User Manual

·Step 1: Launch MP4-Cloner and click on the "Convert"button.

·Step 2:

7.5. Convert video files on PC

ClonerAlliance UHD Pro User Manual
Click on the "Add File(s)"button to add one or more MP4 videos to the list and then click on the "Next" button.

Note: If you add two or more MP4 videos, the option "Combine into one file"at the bottom will be available. This feature enables you to combine the converted videos into one video. You can select to use it or just ignore it.
·Step 3: Set the target format. You can set the parameters here and then click on the "Next"button.

7.5. Convert video files on PC

ClonerAlliance UHD Pro User Manual

·Step 4: Set the output folder. Click on the"Browse"button to choose the video saving path and then click on the"Start"
button.

7.5. Convert video files on PC

ClonerAlliance UHD Pro User Manual

Note: On this window, there is an option "Output video to the source directory". If you check this option, the video will be saved to the source directory. To avoid the same file name, the option "Add a suffix to the target file name"will be also checked automatically to differentiate the target video and source video.
·Step 5: It will start converting.

7.5. Convert video files on PC

ClonerAlliance UHD Pro User Manual

Note: If you'd like to shut down your computer after the conversion is completed, please close all the other programs and select "Shut down the computer when the conversion is finished".
·Step 6: Completed!

7.5. Convert video files on PC

PREVIEW VIDEOS FOR LIVE STREAMING
You can use ClonerAlliance UHD Pro in ClonerAlliance Helper to preview/record/livestream videos, or you can also use OBS Studio, which is a popular open source software for video recording and live streaming.
8.1 Connection Guide of ClonerAlliance UHD Pro
1. Connect the video player to IN port on ClonerAlliance UHD Pro via an HDMI cable. 2. Connect the Micro-USB to USB cable between the "To PC"port and the USB port of PC. 3. Plug the power adapter into the power socket and plug the other end into the 5V/2A port of ClonerAlliance UHD Pro.
8.2 Install ClonerAlliance Helper or OBS Studio
For Windows users, ClonerAlliance Helper or third party software like OBS, VLC, etc can be used with ClonerAlliance UHD Pro. For Mac or Linux users, please download third party software like OBS Mac/Linux version accordingly to work with ClonerAlliance UHD Pro. You may make a selection according to your own demand.
74

ClonerAlliance UHD Pro User Manual See details about Install and register ClonerAlliance Helper (Windows Users) See details about Install OBS Studio
8.3 Setting for live stream in ClonerAlliance Helper (Windows)
1. Run ClonerAlliance Helper software.

8.3. Setting for live stream in ClonerAlliance Helper (Windows)

2. Please click to setup live stream server:

ClonerAlliance UHD Pro User Manual

Then click "Add" to confirm settings and add a live stream server.

3. Please click

to start live streaming.

4. At the same time, you also can click

to capture the streaming videos.

8.3. Setting for live stream in ClonerAlliance Helper (Windows)

ClonerAlliance UHD Pro User Manual
8.4 Setting for preview video in OBS studio
1. Run Open Broadcaster Software (OBS Studio).

8.4. Setting for preview video in OBS studio

ClonerAlliance UHD Pro User Manual 2. Please click "+"below "Sources"and select "Video Capture Device"from the pop-up menu, then click "OK".

8.4. Setting for preview video in OBS studio

ClonerAlliance UHD Pro User Manual
3. In the "Properties for Video Capture Device"window, select "CA-989UP UVC"in the dropdown list of "Device" , and then scroll down to the "Audio Output Mode"option. Please select "Output desktop audio (DirectSound)"in the drop-down list. Click "OK"to save the settings.

8.4. Setting for preview video in OBS studio

ClonerAlliance UHD Pro User Manual

8.4. Setting for preview video in OBS studio

4. Now you can preview the video.

ClonerAlliance UHD Pro User Manual

Note: Please do NOT run ClonerAlliance Helper and any Third-Party Live Streaming Software like OBS Studio at the same time. You need to run each of them separately.

8.4. Setting for preview video in OBS studio

FREQUENTLY ASKED QUESTIONS
You can visit https://www.cloner-alliance.com/help/knowledgebase at any time to view latest technical questions and answers. Why does the "HDMI IN"field of OSD show "Please scan QR"after connecting HDMI cable with ClonerAlliance UHD Pro? After all devices are connected properly, in the process of recording certain video sources, you may see the red "Please scan QR"in the HDMI IN field of OSD.
82

ClonerAlliance UHD Pro User Manual
Please click here to find the answer. 83

ClonerAlliance UHD Pro User Manual Why can't I switch H.264 to H.265? Please note that the button is only available when USB storage device is connected. What do different colors of the LED light on ClonerAlliance UHD Pro indicate? Top Indicator

Color Stable BLUE Stable GREEN Flashes BLUE&GREEN Alternately

Status Output Resolution is 4K30 Output Resolution is 1080p60 or Below No Input/Unsupported Input

Side Indicator

Color Off Stable BLUE Stable GREEN

Status No Storage Device Connected Video Format is H.264 (AVC) Video Format is H.265 (HEVC)

USB device is not detected and side indicator isn't on, what should I do? 84

ClonerAlliance UHD Pro User Manual

Please proceed as follows:

1. Plug the USB device before powering on UHD Pro. 2. If the USB device isn't detected, keep it inserted and reboot ClonerAlliance UHD Pro.

What resolutions does ClonerAlliance UHD Pro support?

FYI. Please make sure your source device`s output resolution is correspondent with the supported input resolutions in this chart, ClonerAlliance UHD Pro will record accordingly.

Input Resolution 3840x2160(60Hz) 3840x2160(50Hz) 3840x2160(30Hz) 3840x2160(24Hz) 1920 x1080(60Hz) 1920 x1080(50Hz) 1080i60 1080i50 720p60 720p50 576p50 480p60

Output Resolution 1920 x1080(60Hz) 1920 x1080(50Hz) 3840x2160(30Hz) 3840x2160(25Hz) 1920 x1080(60Hz) 1920 x1080(50Hz) 1080i60 1080i50 720p60 720p50 576p50 480p60

Recorded Resolution 1920 x1080(60Hz) 1920 x1080(50Hz) 3840x2160(30Hz) 3840x2160(24Hz) 1920 x1080(60Hz) 1920 x1080(50Hz) 1080p30 1080p25 720p60 720p50 576p50 480p60

ClonerAlliance UHD Pro User Manual
Why are there frame glitches raised when having ClonerAlliance UHD Pro connected? How do I get a cinema-like 4k video?
ClonerAlliance UHD Pro records 4K content with their native FPS (between 23-30Hz), allowing you to get a cinema-like viewing experience on your TV. The native FPS of the contents is called Cinematic-FPS.
Films and Television broadcasts are commonly produced at 24fps, in Europe, it is usually 25fps. These various display rates are specific to each type of content and are known as the native FPS.
In most cases, the frame glitches occur because the display FPS of the your source device does not match the native FPS of the 4K content.
To get a cinema-like 4k video, please set your 4K source video to be played in the native format/fps. First, please go to your video player's settings and set the display mode as "Auto Detect"(Or you may select the "4K@24Hz"display mode directly.), some video players may also need you to enable the auto-adjust display refresh rate setting. After having the source video played at 4K@24fps from your source device, ClonerAlliance UHD Pro will be able to output the 4K content at 4K@25fps and record at 4K@24fps.
Please make sure the output of your source device is selected to match one of the supported input resolutions in the resolution chart(Please refer to the resolution chart above.), ClonerAlliance UHD Pro will pass through and record the videos accordingly.
If you want a 60fps recording, please have your video player output set to 4K@60Hz, then ClonerAlliance UHD Pro will output and record the 4K content at 1080p@60fps. Although the recorded video is 1080p@60fps rather than 4K@60fps, this
86

ClonerAlliance UHD Pro User Manual
is the most efficient way to get a smooth 60fps video. If you get into trouble in the process, please let us know your video player device's brand and model number, and we can help you work it out.
Best practice for Cinematic-FPS:
1. For recording Cinematic-FPS: Set the TV to cinema or filmmaker mode. Set the display mode of the 4K video player to "auto adjustment"or "4K@24hz/23.97hz". The display option can be found in all 4K video players.
2. For watching Cinematic-FPS on the smart TVs:
Set the TV to cinema or filmmaker mode. It is recommended to use the built-in media file function of the smart TV to play recorded 4K@24fps MP4 files for the best picture quality.
Does ClonerAlliance UHD Pro work with an over-2TB external hard drive?
Yes, ClonerAlliance UHD Pro works with an over-2TB external hard drive.
For ClonerAlliance UHD Pro, it works with all formats of USB sticks(NTFS, FAT32, exFat) and external hard drives(MBR and GPT). FYI. Due to the maximum capacity limitation of FAT32 and NTFS format, if you use an over-2TB external hard
87

ClonerAlliance UHD Pro User Manual
drive and don't want to partition it, please format it to exFAT, it will work. If you want to use NTFS/FAT32, please partition it first, it will work.
File system limitations:
FAT: The single file can be 2GB at most. The maximum capacity of the partition is 2GB.
FAT32: The single file can be 4GB at most. The maximum capacity of the partition is 128GB.
NTFS: The single file can be 2TB at most. The maximum capacity of the partition is 2TB. exFAT: Theoretically, there's no limitation on the single file's size and maximum capacity of the partition.
Why does the recorded file split into multiple segments?
Using exFAT/NTFS USB storage devices, the single recorded file will be 16.7GB at most. Using FAT32 USB storage devices, the single recorded file will be 4GB at most due to the limitation of FAT32 format.
Once the recorded file size exceeds these limitations accordingly, ClonerAlliance UHD Pro will generate a new video file automatically to continue the record.(If needed, you may use bundled Windows software MP4-Cloner to combine them into one file easily.)
Note: The single file length is also limited to 3 hours. If the size of the video file has not reached 4GB/16GB but the length
88

ClonerAlliance UHD Pro User Manual
exceeds three hours, it will also generate a new video file.
How to record videos to the USB storage device with ClonerAlliance UHD Pro?
See details about Record videos to the USB storage device
How to playback the recorded video files on the USB storage device?
See details about Playback the Recorded Media files
Can I rename the recorded video file and still play it back with ClonerAlliance UHD Pro?
Yes, but you need to take the USB storage device out from your ClonerAlliance UHD Pro and rename the recorded files on a computer. Please be sure the file's name begins with "REC", namely, you can customize the latter part, please rename it to the format of REC_XXXXXXXXXX.mp4, then the renamed video files also can be played with UHD Pro.
FYI. If you want to rename the screenshot and still want to be able to view it on your TV through the UHD Pro, please be sure the file's name begins with "IMG", please rename it to the format of IMG_XXXXXXXXXX.jpg.
Does ClonerAlliance UHD Pro record 5.1 audio from the HDMI (AC3, DTS etc) or just 2 channels? ClonerAlliance UHD Pro records PCM or Stereo audio format. I am sorry that it doesn't record Dolby Digital 5.1. Please adjust the audio output of your source device to PCM or Stereo before recording.
89

ClonerAlliance UHD Pro User Manual How to deal with the color bars displayed on screen when using PC to capture or edit videos with ClonerAlliance UHD Pro? See details about Record/Capture videos on PC
90

PRODUCT SPECIFICATIONS

Input
Output
Recording Output format Video standard (input) Input signal Output signals Max transmission bitrate Bitrate Weight Dimensions

1920x1080 640x480, 720x480, 720x576, 800x600, 1024x768, 1280x720, 1280x1024, 600x1200, 1920x1080, 3840x2160(60HZ, 30HZ, 24HZ) 640x480, 720x480, 720x576, 800x600, 1024x768, 1280x720, 1280x1024, 600x1200, 1920x1080, 3840x2160(30HZ, 25HZ) Up to 3840x2160(30fps) H.264, H.265
HDMI 2.0 standard HDMI, Line in, Mic HDMI (pass-through), USB, Line out
480 megabytes
Max: 20Mbps 8.5 oz 4.6 x 4.6 x 1.1 inches

AFTER SALES WARRANTY ClonerAlliance Inc. provides 60-Day No Hassle Return(No Additional Fee) and 2-Year Replacement Warranty Service for all hardware. Please rest assured to use ClonerAlliance products.
92

CONTACT US If you encounter any problem when using our products, please contact us by support@cloner-alliance.com or call 1-844-9-CLONER (toll free) and we will serve you with utmost satisfaction. We'll offer a satisfying discount on batch purchase and affiliate program. If you are interested, please contact us by market@cloner-alliance.com.
93

DISCLAIMER HDMI is a registered trademark of HDMI Licensing, LLC. USB is a registered trademark of USB Implementers Forum. HDMI and USB are registered trademarks of their respective companies. ClonerAlliance Inc. is not affiliated with those companies.
94

References

LaTeX with hyperref xdvipdfmx (20211117)