File:Bw nb.png - Teltonika Telematics Wiki
Teltonika Telematics Wiki
Owner's Manual for TELTONIKA models including: FMB630 GNSS GSM and Bluetooth Terminal Tracker, FMB630, GNSS GSM and Bluetooth Terminal Tracker, GSM and Bluetooth Terminal Tracker, Bluetooth Terminal Tracker, Terminal Tracker, Tracker
File Info : application/pdf, 6 Pages, 69.32KB
DocumentDocumenthttps://wiki.teltonika-gps.com/view/FMB630_General_description FMB630 General description Main Page > EOL Products > FMB630 > FMB630 Manual > FMB630 General description FMB630 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects. Contents 1 Package contents 2 Basic characteristics 3 Technical features 4 Technical information about internal battery 5 Electrical characteristics 6 Absolute maximum ratings Package contents Usually the FMB630 device sample is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains: FMB630 device; 4 screws for assembling device GPS/GLONASS antenna GSM antenna USB cable Port 1/2 cable Port 3 cable Ni-MH Rechargeable battery, 8.4V, 550 mA. Input and output power supply cable with 2x10 connection pins. Basic characteristics GSM/GPRS/ features: Quad-band 900/1800 MHz; 850/1900 MHz GPRS Multi-Slot Class 12(up to 240 kbps) GPRS Mobile Station Class B SMS (text/data) Bluetooth: Bluetooth specification V3.0 Bluetooth transceiver fully compliant with Bluetooth specification V3.0 for external peripherals: Voice calls over Bluetooth Configuration via Bluetooth GNSS: Tracking: 33/ 99 acquisition channels -165 dBM sensitivity Hot start <1s Warm Start < 25s Cold start < 35s NMEA-183 protocol GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS Accuracy < 3m Hardware features: STM32 processor; 1MB internal Flash memory; External Micro SD card slot; Built-in accelerometer; Built-in Bluetooth 3.0; Internal backup battery included; Interface: Power supply: 10 ÷ 30V; USB port; 4 digital inputs; 3 analog inputs; 4 open collector digital outputs; 1Wire® interface; LEDs indicating device status; K-Line interface for online Tachograph Vehicle Data transfer; 2xRS232 port; RS485 port; J1708 interface; CAN messages 2.0 A, B Active support. Speed up to 1 Mbit/s; Roaming enabling/disabling; Offline working mode; Records importing using USB/microSD card; Remote logs reading via SMS/GPRS; Description Voltage Duration Normal operation +10 ... +30 V Unlimited Protection turns on, device turns off 34 V Unlimited Maximum voltage < 70 V Unlimited Maximum voltage impulse 90 V 5 ms Technical features Part name Navigation indication Modem indication Socket USB GNSS GSM Physical specification LED LED Soldered inner socket Mini USB socket External GNSS antenna External GSM antenna Technical details 2 W max. Current consumption at 12 V GPRS: average 120 mA rms Nominal: average 65 rms GNSS sleep: average 28 mA Deep Sleep: average 7 mA Online Deep Sleep: average 12 mA 2 W max. Current consumption at 24 V Battery charge current Operating temperature (without battery) GPRS: average 35 mA Nominal: average 20 mA GNSS sleep: average 12,5 mA Deep Sleep: average 3,8 mA Online Deep Sleep: average 1,3 mA Average 55 mA -40..+85 Storage temperature (without battery) -40..+85 Storage relative humidity Device + case + battery weight 5..95% (no condensation) 197 g Dimension drawing: Technical information about internal battery Internal back-up battery Ni-MH rechargeable battery Battery voltage (V) 8.410.0 Nominal Capacity (mAh) 550 Charging temperature (°C) 0 45 Batteries are covered by 6 month warranty support. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets. Electrical characteristics Characteristic description Value Min. Typ. Max. Unit Supply Voltage: Supply Voltage (Recommended Operating Conditions) +10 +30 V Digital Output (Open Drain grade): Drain current (Digital Output OFF) 120 µA Drain current (Digital Output ON, Recommended Operating Conditions) 0.5 A Static Drain-Source resistance (Digital Output ON) 400 300 m Digital Input: Input resistance (DIN1) 15 k Input resistance (DIN2) 15 k Input resistance (DIN3) 15 k Input voltage (Recommended Operating Conditions) 0 Supply voltag V e Input Voltage threshold (DIN1) 7.5 V Input Voltage threshold (DIN2, DIN3, DIN4) 2.5 V Analog Input: Input voltage (Recommended Operating Conditions), Range 0 1 +10 V Input resistance, Range 1 120 k Input voltage (Recommended Operating Conditions), Range 0 2 +30 V Input resistance, Range 2 147 k Output Supply Voltage 1-Wire: Supply voltage +4.5 +4.7 V Output inner resistance 7 Output current (Uout > 3.0 V) Short circuit current (Uout = 0) CAN Interface: 30 mA 75 mA Internal terminal resistors CAN bus 120 Differential input resistance 19 30 52 k Recessive output voltage 2 2.5 3 V Differential input resistance 0.5 0.7 0.9 V Common mode input voltage -30 30 V Power supply current (Hardware version with internal battery): Deep Sleep, average, Icc.ds 2.5 4 mA Sleep, average, Icc.ds, Vcc=10V 45 mA Sleep, average, Icc.ds, Vcc=30V 25 mA Ucc=12.6V, all modules fully working, internal battery is charging, Icc1 350 mA Ucc=12.6V, all modules fully working, internal battery is charging, Icc2 300 mA Ucc=25.2V, all modules fully working, internal battery is charging, Icc3 195 mA Ucc=25.2V, all modules fully working, internal battery is charging, Icc4 140 mA RS232/RS485 Input Voltage: RS485 input voltage range on A or B pin (common-mode voltage) -7 +12 V RS232 input voltage range (common-mode voltage) -15 +15 V Analog Input error margin can increase if temperature varies. Absolute maximum ratings Characteristic description Supply Voltage (Absolute Maximum Ratings) Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA) Digital Input Voltage (Absolute Maximum Ratings) Analog Input Voltage (Absolute Maximum Ratings) Value Min. Typ. Max. Unit -32 +32 V +36 V -32 +32 V -32 +32 V RS232 Input Voltage (Absolute Maximum Ratings) -25 +25 V