FCC TEST REPORT

user

Test Report (DTS-WLAN)

HTC Corporation 0PM9120 Smartphone NM80PM9120 NM80PM9120 0pm9120

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=2674517
FCC TEST REPORT (15.247)

REPORT NO.: MODEL NAME:
FCC ID: RECEIVED:
TESTED: ISSUED:

RF150324C16-4 0PM9120 NM80PM9120 Mar. 24, 2015 May 08, 2015 ~ May 18, 2015 May 25, 2015

APPLICANT: HTC Corporation ADDRESS: 1F, 6-3 Baoqiang Road, Xindian District, New Taipei City, Taiwan 231
ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
LAB ADDRESS: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C )
TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 333, Taiwan, R.O.C.
This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.

This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification.

Report No.: RF150324C16-4

1 of 54

Report Format Version 5.2.1

TABLE OF CONTENTS

RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION..................................................................................................................................5 2. SUMMARY OF TEST RESULTS .........................................................................................................6
2.1 MEASUREMENT UNCERTAINTY...............................................................................................6 3. GENERAL INFORMATION ..................................................................................................................7
3.1 GENERAL DESCRIPTION OF EUT ............................................................................................7 3.2 DESCRIPTION OF TEST MODES ..............................................................................................8
3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.................................9 3.3 DESCRIPTION OF SUPPORT UNITS ......................................................................................11
3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ..........................................................11 3.4 DUTY CYCLE TEST SIGNAL................................................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS .......................................................... 13 4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND) ....................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .................................................. 14
4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT................... 14 4.1.2 TEST INSTRUMENTS................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................... 16 4.1.5 TEST SETUP ............................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................ 17 4.1.7 TEST RESULTS........................................................................................................... 18 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................................... 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 30 4.2.2 TEST INSTRUMENTS................................................................................................. 30 4.2.3 TEST PROCEDURES ................................................................................................. 31 4.2.4 DEVIATION FROM TEST STANDARD ....................................................................... 31 4.2.5 TEST SETUP ............................................................................................................... 32 4.2.6 EUT OPERATING CONDITIONS ................................................................................ 32 4.2.7 TEST RESULTS........................................................................................................... 33 4.3 6dB BANDWIDTH MEASUREMENT ....................................................................................... 37 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ........................................................ 37 4.3.2 TEST SETUP ............................................................................................................... 37 4.3.3 TEST INSTRUMENTS................................................................................................. 37 4.3.4 TEST PROCEDURE .................................................................................................... 37 4.3.5 DEVIATION FROM TEST STANDARD ....................................................................... 37 4.3.6 EUT OPERATING CONDITIONS ................................................................................ 37 4.3.7 TEST RESULTS........................................................................................................... 38 4.4 CONDUCTED OUTPUT POWER ............................................................................................ 40 4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT................................ 40 4.4.2 TEST SETUP ............................................................................................................... 40 4.4.3 TEST INSTRUMENTS................................................................................................. 40 4.4.4 TEST PROCEDURES ................................................................................................. 40 4.4.5 DEVIATION FROM TEST STANDARD ....................................................................... 40 4.4.6 EUT OPERATING CONDITIONS ................................................................................ 40 4.4.7 TEST RESULTS........................................................................................................... 41 4.5 POWER SPECTRAL DENSITY MEASUREMENT................................................................... 42 4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT ................................... 42 4.5.2 TEST SETUP ............................................................................................................... 42 4.5.3 TEST INSTRUMENTS................................................................................................. 42 4.5.4 TEST PROCEDURE .................................................................................................... 42 4.5.5 DEVIATION FROM TEST STANDARD ....................................................................... 42 4.5.6 EUT OPERATING CONDITION................................................................................... 42

Report No.: RF150324C16-4

2 of 54

Report Format Version 5.2.1

4.5.7 TEST RESULTS........................................................................................................... 43 4.6 CONDUCTED OUT OF BAND EMISSION MEASUREMENT ................................................. 45
4.6.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT .................. 45 4.6.2 TEST SETUP ............................................................................................................... 45 4.6.3 TEST INSTRUMENTS................................................................................................. 45 4.6.4 TEST PROCEDURE .................................................................................................... 45 4.6.5 DEVIATION FROM TEST STANDARD ....................................................................... 45 4.6.6 EUT OPERATING CONDITION................................................................................... 45 4.6.7 TEST RESULTS........................................................................................................... 46 5. PHOTOGRAPHS OF THE TEST CONFIGURATION....................................................................... 52 6. INFORMATION ON THE TESTING LABORATORIES ..................................................................... 53 7. APPENDIX A ­ MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ........................................................................................................................................... 54

Report No.: RF150324C16-4

3 of 54

Report Format Version 5.2.1

RELEASE CONTROL RECORD

ISSUE NO.

REASON FOR CHANGE

RF150324C16-4 Original release

DATE ISSUED May 25, 2015

Report No.: RF150324C16-4

4 of 54

Report Format Version 5.2.1

1. CERTIFICATION
PRODUCT: Smartphone MODEL: 0PM9120 BRAND: HTC
APPLICANT: HTC Corporation TESTED: May 08, 2015 ~ May 18, 2015
TEST SAMPLE: Production Unit STANDARDS: FCC Part 15, Subpart C (Section 15.247) ANSI C63.10-2009
The above equipment (model: 0PM9120) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample's EMC characteristics under the conditions specified in this report.

PREPARED BY :

Ivonne Wu / Supervisor

, DATE : May 25, 2015

APPROVED BY

:

, DATE :

Sam Chen / Senior Project Engineer

May 25, 2015

Report No.: RF150324C16-4

5 of 54

Report Format Version 5.2.1

2. SUMMARY OF TEST RESULTS

The EUT has been tested according to the following specifications:

APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247)

STANDARD SECTION

TEST TYPE

15.207 AC Power Conducted Emission

15.205 & Radiated Emissions 15.209 15.247(d) Band Edge Measurement 15.247(d) Antenna Port Emission 15.247(a)(2) 6dB bandwidth 15.247(b) Conducted power 15.247(e) Power Spectral Density 15.203 Antenna Requirement

RESULT

REMARK

PASS
PASS PASS PASS PASS

Meet the requirement of limit. Minimum passing margin is -15.72dB at 0.41197MHz. Meet the requirement of limit. Minimum passing margin is -3.51dB at 32.16MHz.
Meet the requirement of limit.
Meet the requirement of limit.
Meet the requirement of limit.

PASS PASS PASS

Meet the requirement of limit. Meet the requirement of limit. No antenna connector is used.

2.1 MEASUREMENT UNCERTAINTY

Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2:

MEASUREMENT

FREQUENCY

UNCERTAINTY

Conducted emissions

9kHz~30MHz

2.44 dB

30MHz ~ 200MHz

2.93 dB

Radiated emissions

200MHz ~1000MHz 1GHz ~ 18GHz

2.95 dB 2.26 dB

18GHz ~ 40GHz

1.94 dB

This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2.

Report No.: RF150324C16-4

6 of 54

Report Format Version 5.2.1

3. GENERAL INFORMATION

3.1 GENERAL DESCRIPTION OF EUT

EUT MODEL NAME POWER SUPPLY
MODULATION TYPE

Smartphone
0PM9120 5.0Vdc (adapter or host equipment) 3.85Vdc or 3.8Vdc (Li-ion battery) CCK, DQPSK, DBPSK for DSSS 64QAM, 16QAM, QPSK, BPSK for OFDM

MODULATION TECHNOLOGY TRANSFER RATE

DSSS, OFDM 802.11b: 11.0 / 5.5 / 2.0 / 1.0 Mbps 802.11g: 54.0 / 48.0 / 36.0 / 24.0 / 18.0 / 12.0 / 9.0 / 6.0 Mbps 802.11n: up to MCS7

OPERATING FREQUENCY

2412 ~ 2462MHz

NUMBER OF CHANNEL

11

OUTPUT POWER

239.33mW

ANTENNA TYPE

PIFA antenna with -0.5dBi gain

ANTENNA CONNECTOR

NA

DATA CABLE

Refer to Note as below

I/O PORTS ACCESSORY DEVICES

Refer to user's manual Refer to Note as below

NOTE:

1. There're 2 configurations for the EUT listed as below.

Main sample (A): Phone + Battery 1 + LCD Panel 1 2nd sample (B): Phone + Battery 2 + LCD Panel 2  Only the worst test data was presented in the report.

2. The EUT's accessories list refers to Ext. Pho.

3. The above EUT information is declared by the manufacturer and for more detailed features

description, please refer to the manufacturer's specifications or User's Manual.

Report No.: RF150324C16-4

7 of 54

Report Format Version 5.2.1

3.2 DESCRIPTION OF TEST MODES

FOR 2.4GHz:

11 channels are provided for 802.11b, 802.11g and 802.11n (20MHz):

CHANNEL

FREQUENCY

CHANNEL

1

2412MHz

7

2

2417MHz

8

3

2422MHz

9

4

2427MHz

10

5

2432MHz

11

6

2437MHz

FREQUENCY 2442MHz 2447MHz 2452MHz 2457MHz 2462MHz

Report No.: RF150324C16-4

8 of 54

Report Format Version 5.2.1

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL

WLAN 2.4GHz:

EUT CONFIGURE
MODE

RE1G

APPLICABLE TO

RE<1G

PLC

APCM

DESCRIPTION

A









Main sample

B







-

2nd sample

Where

RE1G: Radiated Emission above 1GHz

RE<1G: Radiated Emission below 1GHz

PLC: Power Line Conducted Emission

APCM: Antenna Port Conducted Measurement

NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane.

RADIATED EMISSION TEST (ABOVE 1GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possible combinations

between available modulations, data rates and antenna ports (if EUT with antenna diversity

architecture).

Following channel(s) was (were) selected for the final test as listed below.

EUT CONFIGURE
MODE

MODE

AVAILABLE CHANNEL

TESTED CHANNEL

MODULATION

DATA RATE

MODULATION TYPE

TECHNOLOGY

(Mbps)

802.11b

1 to 11

1, 6, 11

DSSS

DBPSK

1.0

A

802.11g

1 to 11

1, 6, 11

OFDM

BPSK

6.0

802.11n (20MHz)

1 to 11

1, 6, 11

OFDM

BPSK

MCS0

B

802.11n (20MHz)

1 to 11

1

OFDM

BPSK

MCS0

RADIATED EMISSION TEST (BELOW 1GHz):

Pre-Scan has been conducted to determine the worst-case mode from all possible combinations

between available modulations, data rates and antenna ports (if EUT with antenna diversity

architecture).

Following channel(s) was (were) selected for the final test as listed below.

EUT CONFIGURE
MODE

MODE

AVAILABLE CHANNEL

TESTED CHANNEL

MODULATION

DATA RATE

MODULATION TYPE

TECHNOLOGY

(Mbps)

A, B

802.11n (20MHz)

1 to 11

1

OFDM

BPSK

MCS0

POWER LINE CONDUCTED EMISSION TEST: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity

architecture).

Following channel(s) was (were) selected for the final test as listed below.

EUT CONFIGURE
MODE

MODE

AVAILABLE CHANNEL

TESTED CHANNEL

MODULATION

DATA RATE

MODULATION TYPE

TECHNOLOGY

(Mbps)

A, B

802.11n (20MHz)

1 to 11

1

OFDM

BPSK

MCS0

Report No.: RF150324C16-4

9 of 54

Report Format Version 5.2.1

BANDEDGE MEASUREMENT:

Pre-Scan has been conducted to determine the worst-case mode from all possible combinations

between available modulations, data rates and antenna ports (if EUT with antenna diversity

architecture).

Following channel(s) was (were) selected for the final test as listed below.

EUT CONFIGURE
MODE

MODE

AVAILABLE CHANNEL

TESTED CHANNEL

MODULATION

DATA RATE

MODULATION TYPE

TECHNOLOGY

(Mbps)

802.11b

1 to 11

1, 6, 11

DSSS

DBPSK

1.0

A

802.11g

1 to 11

1, 6, 11

OFDM

BPSK

6.0

802.11n (20MHz)

1 to 11

1, 6, 11

OFDM

BPSK

MCS0

ANTENNA PORT CONDUCTED MEASUREMENT:

This item includes all test value of each mode, but only includes spectrum plot of worst value of

each mode.

Pre-Scan has been conducted to determine the worst-case mode from all possible combinations

between available modulations, data rates and antenna ports (if EUT with antenna diversity

architecture).

Following channel(s) was (were) selected for the final test as listed below.

EUT CONFIGURE
MODE

MODE

AVAILABLE CHANNEL

TESTED CHANNEL

MODULATION

DATA RATE

MODULATION TYPE

TECHNOLOGY

(Mbps)

802.11b

1 to 11

1, 6, 11

DSSS

DBPSK

1.0

A

802.11g

1 to 11

1, 6, 11

OFDM

BPSK

6.0

802.11n (20MHz)

1 to 11

1, 6, 11

OFDM

BPSK

MCS0

TEST CONDITION:

APPLICABLE TO

ENVIRONMENTAL CONDITIONS

RE1G

25deg. C, 65%RH

RE<1G

25deg. C, 65%RH

PLC

25deg. C, 65%RH

APCM

25deg. C, 65%RH

INPUT POWER 120Vac, 60Hz 120Vac, 60Hz 120Vac, 60Hz
3.8Vdc

TESTED BY Harry Hsueh Harry Hsueh
Toby Tian Luke Chen

Report No.: RF150324C16-4

10 of 54

Report Format Version 5.2.1

3.3 DESCRIPTION OF SUPPORT UNITS
The EUT has been tested as an independent unit together with other necessary accessories or support units.
3.3.1 CONFIGURATION OF SYSTEM UNDER TEST

*Test Table

EUT
(Power from AC Adapter)

Earphone (EUT)

Report No.: RF150324C16-4

11 of 54

Report Format Version 5.2.1

3.4 DUTY CYCLE TEST SIGNAL

WLAN 2.4GHz

802.11b: Duty cycle of test signal is 100 %

802.11g: Duty cycle of test signal is > 98 %

802.11n (20MHz): Duty cycle = 1.267/1.300 = 0.975, Duty factor = 10 * log(1/0.975) = 0.10

802.11b

802.11g (20MHz)

802.11n (20MHz)

Report No.: RF150324C16-4

12 of 54

Report Format Version 5.2.1

3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS
The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards:
FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r02 ANSI C63.10-2009
All test items have been performed and recorded as per the above standards.
NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately.

Report No.: RF150324C16-4

13 of 54

Report Format Version 5.2.1

4. TEST TYPES AND RESULTS (FOR 2.4GHz BAND)

4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT

4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power:

FREQUENCIES (MHz)

FIELD STRENGTH (microvolts/meter)

MEASUREMENT DISTANCE (meters)

0.009 ~ 0.490

2400/F(kHz)

300

0.490 ~ 1.705

24000/F(kHz)

30

1.705 ~ 30.0

30

30

30 ~ 88

100

3

88 ~ 216

150

3

216 ~ 960

200

3

Above 960

500

3

NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however,
the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation.

Report No.: RF150324C16-4

14 of 54

Report Format Version 5.2.1

4.1.2 TEST INSTRUMENTS

DESCRIPTION & MANUFACTURER

MODEL NO.

SERIAL NO.

DATE OF DUE DATE OF CALIBRATION CALIBRATION

Test Receiver Agilent Spectrum Analyzer Agilent Spectrum Analyzer ROHDE & SCHWARZ
BILOG Antenna SCHWARZBECK HORN Antenna SCHWARZBECK
HORN Antenna SCHWARZBECK
Loop Antenna Preamplifier EMCI Preamplifier EMCI Preamplifier EMCI
Power Meter Anritsu
Power Sensor Anritsu RF signal cable HUBER+SUHNNER RF signal cable HUBER+SUHNNER RF Coaxial Cable Worken Software BV ADT
Antenna Tower MF
Turn Table MF Antenna Tower &Turn Table Controller MF

N9038A N9010A FSU43 VULB9168 BBHA 9120 D BBHA 9170 EM-6879 EMC 012645 EMC 184045 EMC 330H ML2495A MA2411B SUCOFLEX 104 SUCOFLEX 104 8D-FB
E3 6.120103 MFA-440H MFT-201SS

MY51210203 MY52220314
101261 9168-472 9120D-969 9170-480
269 980115 980116 980112 1232002 1207325 309219/4 2950114 250130/4 Cable-Ch10-01
NA NA NA

Jan. 21, 2015 Jan. 21, 2016

Sep. 03, 2014 Sep. 02, 2015

Dec. 10, 2014 Dec. 09, 2015

Feb. 04, 2015 Feb. 04, 2016

Feb. 09, 2015 Feb. 09, 2016

Feb. 04, 2015 Aug. 13, 2014 Dec. 12, 2014

Feb. 04, 2016 Aug. 12, 2015 Dec. 11, 2015

Jan. 09, 2015 Jan. 08, 2016

Dec. 27, 2014 Dec. 26, 2015

Sep. 17, 2014 Sep. 16, 2015

Sep. 17, 2014 Sep. 16, 2015

Oct. 18, 2014 Oct. 17, 2015

Oct. 18, 2014 Oct. 17, 2015

Nov. 07, 2014 Nov. 06, 2015

NA

NA

NA

NA

NA

NA

MF-7802

NA

NA

NA

NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are

traceable to NML/ROC and NIST/USA.

2. The test was performed in HwaYa Chamber 10.

3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of

emission frequency above 1GHz if tested.

4. The FCC Site Registration No. is 690701.

5. The IC Site Registration No. is IC 7450F-10.

Report No.: RF150324C16-4

15 of 54

Report Format Version 5.2.1

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1GHz) / 1.5 meters (for
above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Height of receiving antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 1kHz (Duty cycle < 98%) or 10Hz (Duty cycle > 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported.
4.1.4 DEVIATION FROM TEST STANDARD No deviation.

Report No.: RF150324C16-4

16 of 54

Report Format Version 5.2.1

4.1.5 TEST SETUP <Frequency Range 30MHz ~ 1GHz>

EUT& Support Units
80cm

130mm
Turn Table

Ant. Tower

Ground Plane Test Receiver

1-4m Variable

<Frequency Range above 1GHz>

EUT& Support Units
150cm

Ant. Tower 3m Turn Table
Absorber
Ground Plane Test Receiver

1-4m Variable

For the actual test configuration, please refer to the attached file (Test Setup Photo).
4.1.6 EUT OPERATING CONDITIONS a. Placed the EUT on a testing table. b. Use the software to control the EUT under transmission condition continuously at specific channel
frequency.

Report No.: RF150324C16-4

17 of 54

Report Format Version 5.2.1

4.1.7 TEST RESULTS ABOVE 1GHz WORST-CASE DATA 802.11b EUT TEST CONDITION

CHANNEL

Channel 1

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2352 2352 2412 2412 2494 2494

40.42

38.83

54

-13.58

31.76

5.33

35.5

125

164 Average

54.75

53.16

74

-19.25

31.76

5.33

35.5

125

164

Peak

104.81 103.04

31.81

5.43

35.47

125

164 Average

107.53 105.76

31.81

5.43

35.47

125

164

Peak

40.55

38.53

54

-13.45

31.9

5.53

35.41

125

164 Average

54.31

52.29

74

-19.69

31.9

5.53

35.41

125

164

Peak

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2390

40.4

38.67

54

-13.6

31.8

5.4

35.47

188

2390

55.72

53.99

74

-18.28

31.8

5.4

35.47

188

2412

99.77

98

31.81

5.43

35.47

188

2412

102.26 100.49

31.81

5.43

35.47

188

2490

40.66

38.65

54

-13.34

31.9

5.53

35.42

188

2490

55.68

53.67

74

-18.32

31.9

5.53

35.42

188

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2412MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

18 of 54

Report Format Version 5.2.1

EUT TEST CONDITION

CHANNEL

Channel 6

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
2386 2386 2437 2437 2492 2492

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

40.45

38.74

54

-13.55

31.8

5.4

35.49

125

164 Average

55.29

53.58

74

-18.71

31.8

5.4

35.49

125

164

Peak

104.88 107.27

103.03 105.42

31.85

5.46

35.46

125

164 Average

31.85

5.46

35.46

125

164

Peak

40.64

38.62

54

-13.36

31.9

5.53

35.41

125

164 Average

55.96

53.94

74

-18.04

31.9

5.53

35.41

125

164

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2334

39.31

37.77

54

-14.69

31.73

5.33

35.52

188

2334

54.81

53.27

74

-19.19

31.73

5.33

35.52

188

2437

100.17

98.32

31.85

5.46

35.46

188

2437

102.35

100.5

31.85

5.46

35.46

188

2488

40.67

38.66

54

-13.33

31.9

5.53

35.42

188

2488

54.84

52.83

74

-19.16

31.9

5.53

35.42

188

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2437MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

19 of 54

Report Format Version 5.2.1

EUT TEST CONDITION

CHANNEL

Channel 11

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
2386 2386 2462 2462 2486 2486

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

40.42

38.71

54

-13.58

31.8

5.4

35.49

125

164 Average

54.74

53.03

74

-19.26

31.8

5.4

35.49

125

164

Peak

105.6 107.94

103.67 106.01

31.87

5.5

35.44

125

164 Average

31.87

5.5

35.44

125

164

Peak

39.98

37.99

54

-14.02

31.88

5.53

35.42

125

164 Average

54.76

52.77

74

-19.24

31.88

5.53

35.42

125

164

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2356

39.69

38.06

54

-14.31

31.76

5.37

35.5

181

2356

54.52

52.89

74

-19.48

31.76

5.37

35.5

181

2462

100.6

98.67

31.87

5.5

35.44

181

2462

102.84 100.91

31.87

5.5

35.44

181

2498

40.67

38.65

54

-13.33

31.9

5.53

35.41

181

2498

55.54

53.52

74

-18.46

31.9

5.53

35.41

181

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2462MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

20 of 54

Report Format Version 5.2.1

802.11g EUT TEST CONDITION

CHANNEL

Channel 1

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2390 2390 2412 2412 2498 2498

45.65

43.92

54

-8.35

31.8

5.4

35.47

125

164 Average

57.74

56.01

74

-16.26

31.8

5.4

35.47

125

164

Peak

96.87

95.1

31.81

5.43

35.47

125

164 Average

105.07

103.3

31.81

5.43

35.47

125

164

Peak

40.67

38.65

54

-13.33

31.9

5.53

35.41

125

164 Average

55.12

53.1

74

-18.88

31.9

5.53

35.41

125

164

Peak

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2390

42.76

41.03

54

-11.24

31.8

5.4

35.47

188

2390

55.88

54.15

74

-18.12

31.8

5.4

35.47

188

2412

93.12

91.35

31.81

5.43

35.47

188

2412

100.97

99.2

31.81

5.43

35.47

188

2500

40.96

38.94

54

-13.04

31.9

5.53

35.41

188

2500

56.67

54.65

74

-17.33

31.9

5.53

35.41

188

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2412MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

21 of 54

Report Format Version 5.2.1

EUT TEST CONDITION

CHANNEL

Channel 6

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
2352 2352 2437 2437 2498 2498

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

40.33

38.74

54

-13.67

31.76

5.33

35.5

54.9

53.31

74

-19.1

31.76

5.33

35.5

125

164 Average

125

164

Peak

97.17 105.49

95.32 103.64

31.85

5.46

35.46

125

164 Average

31.85

5.46

35.46

125

164

Peak

40.68

38.66

54

-13.32

31.9

5.53

35.41

125

164 Average

54.44

52.42

74

-19.56

31.9

5.53

35.41

125

164

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2366

40.24

38.6

54

-13.76

31.76

5.37

35.49

188

2366

55.71

54.07

74

-18.29

31.76

5.37

35.49

188

2437

92.17

90.32

31.85

5.46

35.46

188

2437

100.12

98.27

31.85

5.46

35.46

188

2494

40.65

38.63

54

-13.35

31.9

5.53

35.41

188

2494

56.03

54.01

74

-17.97

31.9

5.53

35.41

188

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2437MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

22 of 54

Report Format Version 5.2.1

EUT TEST CONDITION

CHANNEL

Channel 11

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
2338 2338 2462 2462 2483.5 2483.5

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

40.29

38.74

54

-13.71

31.74

5.33

35.52

125

164 Average

54.54

52.99

74

-19.46

31.74

5.33

35.52

125

164

Peak

96.93 105.34

95 103.41

31.87

5.5

35.44

125

164 Average

31.87

5.5

35.44

125

164

Peak

45.24

43.28

54

-8.76

31.88

5.5

35.42

125

164 Average

63.44

61.48

74

-10.56

31.88

5.5

35.42

125

164

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2330

40.42

38.88

54

-13.58

31.73

5.33

35.52

181

2330

55.08

53.54

74

-18.92

31.73

5.33

35.52

181

2462

91.93

90

31.87

5.5

35.44

181

2462

100.13

98.2

31.87

5.5

35.44

181

2483.5

43.62

41.66

54

-10.38

31.88

5.5

35.42

181

2483.5

59.25

57.29

74

-14.75

31.88

5.5

35.42

181

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2462MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

23 of 54

Report Format Version 5.2.1

802.11n (20MHz) EUT TEST CONDITION

CHANNEL

Channel 1

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2390 2390 2412 2412 2496 2496

47.45

45.72

54

-6.55

31.8

5.4

35.47

125

164 Average

62.62

60.89

74

-11.38

31.8

5.4

35.47

125

164

Peak

97.48

95.71

31.81

5.43

35.47

125

164 Average

105.04 103.27

31.81

5.43

35.47

125

164

Peak

40.64

38.62

54

-13.36

31.9

5.53

35.41

125

164 Average

55.08

53.06

74

-18.92

31.9

5.53

35.41

125

164

Peak

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2390

44.72

42.99

54

-9.28

31.8

5.4

35.47

188

2390

56.39

54.66

74

-17.61

31.8

5.4

35.47

188

2412

91.81

90.04

31.81

5.43

35.47

188

2412

100.19

98.42

31.81

5.43

35.47

188

2494

40.64

38.62

54

-13.36

31.9

5.53

35.41

188

2494

55.69

53.67

74

-18.31

31.9

5.53

35.41

188

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2412MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

24 of 54

Report Format Version 5.2.1

EUT TEST CONDITION

CHANNEL

Channel 6

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
2332 2332 2437 2437 2486 2486

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

40.28

38.74

54

-13.72

31.73

5.33

35.52

125

164 Average

54.69

53.15

74

-19.31

31.73

5.33

35.52

125

164

Peak

96.84 105.19

94.99 103.34

31.85

5.46

35.46

125

164 Average

31.85

5.46

35.46

125

164

Peak

40.75

38.76

54

-13.25

31.88

5.53

35.42

125

164 Average

55.2

53.21

74

-18.8

31.88

5.53

35.42

125

164

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2352

40.32

38.73

54

-13.68

31.76

5.33

35.5

188

2352

54.89

53.3

74

-19.11

31.76

5.33

35.5

188

2437

93.17

91.32

31.85

5.46

35.46

188

2437

100.93

99.08

31.85

5.46

35.46

188

2500

40.55

38.53

54

-13.45

31.9

5.53

35.41

188

2500

55.3

53.28

74

-18.7

31.9

5.53

35.41

188

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2437MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

25 of 54

Report Format Version 5.2.1

EUT TEST CONDITION

CHANNEL

Channel 11

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
2370 2370 2462 2462 2483.5 2483.5

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

40.37

38.71

54

-13.63

31.78

5.37

35.49

125

164 Average

54.86

53.2

74

-19.14

31.78

5.37

35.49

125

164

Peak

97.22 105.11

95.29 103.18

31.87

5.5

35.44

125

164 Average

31.87

5.5

35.44

125

164

Peak

47.28

45.32

54

-6.72

31.88

5.5

35.42

125

164 Average

63.59

61.63

74

-10.41

31.88

5.5

35.42

125

164

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2360

40.75

39.12

54

-13.25

31.76

5.37

35.5

181

2360

55.92

54.29

74

-18.08

31.76

5.37

35.5

181

2462

92.7

90.77

31.87

5.5

35.44

181

2462

100.46

98.53

31.87

5.5

35.44

181

2483.5

45.34

43.38

54

-8.66

31.88

5.5

35.42

181

2483.5

58.49

56.53

74

-15.51

31.88

5.5

35.42

181

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2462MHz: Fundamental frequency.

268 Average

268

Peak

268 Average

268

Peak

268 Average

268

Peak

Report No.: RF150324C16-4

26 of 54

Report Format Version 5.2.1

MODE B 802.11n (20MHz) EUT TEST CONDITION

CHANNEL

Channel 1

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 1GHz ~ 25GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2390 2390 2412 2412 2484 2484

47.4

45.67

54

-6.6

31.8

5.4

35.47

111

150 Average

66.42

64.69

74

-7.58

31.8

5.4

35.47

111

150

Peak

96.59

94.82

31.81

5.43

35.47

111

150 Average

105.1

103.33

31.81

5.43

35.47

111

150

Peak

41.58

39.62

54

-12.42

31.88

5.5

35.42

111

150 Average

61.72

59.76

74

-12.28

31.88

5.5

35.42

111

150

Peak

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

2358

45.38

43.75

54

-8.62

31.76

5.37

35.5

119

2358

64.89

63.26

74

-9.11

31.76

5.37

35.5

119

2412

91.61

89.84

31.81

5.43

35.47

119

2412

99.97

98.2

31.81

5.43

35.47

119

2498

41.58

39.56

54

-12.42

31.9

5.53

35.41

119

2498

61.05

59.03

74

-12.95

31.9

5.53

35.41

119

REMARKS:

1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

2. 2412MHz: Fundamental frequency.

310 Average

310

Peak

310 Average

310

Peak

310 Average

310

Peak

Report No.: RF150324C16-4

27 of 54

Report Format Version 5.2.1

BELOW 1GHz WORST-CASE DATA: MODE A 802.11n (20MHz) EUT TEST CONDITION

CHANNEL

Channel 1

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 30MHz ~ 1GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)
103.44 135.84 281.64 355.3 703.9 932.8

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

29.45

48.04

43.5

-14.05

12.39

1.28

32.26

134

274

Peak

27.56

49.78

43.5

-15.94

8.65

1.38

32.25

164

236

Peak

27.95

45.29

46

-18.05

12.75

2.03

32.12

115

25

Peak

20.6

36.14

46

-25.4

14.28

2.26

32.08

132

131

Peak

21.58

31.27

46

-24.42

19.29

3.11

32.09

106

322

23.81

29.8

46

-22.19

21.63

3.62

31.24

197

114

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

32.16

36.49

56.35

40

-3.51

11.66

0.74

32.26

142

161

60.51

33.12

51.08

40

-6.88

13.37

0.9

32.23

183

48

150.42

22.61

44.95

43.5

-20.89

8.41

1.52

32.27

165

266

384

18.36

33.53

46

-27.64

14.67

2.34

32.18

182

325

562.5

19.41

31.46

46

-26.59

17.33

2.82

32.2

116

98

891.5

22.94

29.59

46

-23.06

21.4

3.49

31.54

191

163

REMARKS: Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

Peak Peak Peak Peak Peak Peak

Report No.: RF150324C16-4

28 of 54

Report Format Version 5.2.1

MODE B 802.11n (20MHz) EUT TEST CONDITION

CHANNEL

Channel 1

INPUT POWER

120Vac, 60 Hz

ENVIRONMENTAL CONDITIONS

25deg. C, 65%RH

MEASUREMENT DETAIL

FREQUENCY RANGE 30MHz ~ 1GHz

DETECTOR FUNCTION

Peak (PK) Average (AV)

TESTED BY

Harry Hsueh

ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

94.8 141.51 216.03
384 652.8 927.9

31.55

50.81

43.5

-11.95

11.62

1.11

31.99

187

337

35.3

57.78

43.5

-8.2

8.41

1.38

32.27

127

281

28.04

47.35

46

-17.96

11.27

1.65

32.23

151

147

23.19

38.36

46

-22.81

14.67

2.34

32.18

153

196

23.05

33.72

46

-22.95

18.49

2.99

32.15

191

282

29.07

35.12

46

-16.93

21.6

3.62

31.27

151

355

ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M

Peak Peak Peak Peak Peak Peak

FREQ. (MHz)

EMISSION LEVEL
(dBuV/m)

READ LEVEL (dBuV)

LIMIT MARGIN (dBuV/m) (dB)

ANTENNA CABLE

FACTOR LOSS

(dB/m)

(dB)

PREAMP ANTENNA TABLE

FACTOR HEIGHT ANGLE REMARK

(dB)

(cm) (Degree)

31.89

36.53

56.39

40

-3.47

11.66

0.74

32.26

174

194

Peak

59.7

35.61

53.57

40

-4.39

13.37

0.9

32.23

125

324

Peak

216.3

22.86

42.17

46

-23.14

11.27

1.65

32.23

108

204

Peak

494.6

21.45

34.64

46

-24.55

16.28

2.63

32.1

146

111

Peak

757.1

26.31

35.33

46

-19.69

19.89

3.22

32.13

159

349

Peak

996.5

30.31

34.74

54

-23.69

22.2

3.72

30.35

113

227

Peak

REMARKS: Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor

Margin value = Emission level ­ Limit value

Report No.: RF150324C16-4

29 of 54

Report Format Version 5.2.1

4.2 CONDUCTED EMISSION MEASUREMENT

4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT

FREQUENCY OF EMISSION (MHz)

CONDUCTED LIMIT (dBµV)

Quasi-peak

Average

0.15 ~ 0.5 0.5 ~ 5 5 ~ 30

66 to 56 56 60

56 to 46 46 50

NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above.

4.2.2 TEST INSTRUMENTS

DESCRIPTION & MANUFACTURER

MODEL NO.

SERIAL NO.

DATE OF

DUE DATE OF

CALIBRATION CALIBRATION

Test Receiver ROHDE & SCHWARZ
RF signal cable Woken
LISN ROHDE & SCHWARZ (EUT)
LISN ROHDE & SCHWARZ (Peripheral)
Software ADT

ESCI 5D-FB ESH3-Z5

100613

Nov. 11, 2014

Cable-HYC01-01 Dec. 26, 2014

Nov. 10, 2015 Dec. 25, 2015

835239/001

Mar. 02, 2015 Mar. 01, 2016

ESH3-Z5
BV ADT_Cond_ V7.3.7.3

100311 NA

Jul. 21, 2014 NA

Jul. 20, 2015 NA

NOTE: 1. The calibration interval of the above test instruments is 12 months and the calibrations are

traceable to NML/ROC and NIST/USA.

2. The test was performed in HwaYa Shielded Room 1.

3. The VCCI Site Registration No. is C-2040.

Report No.: RF150324C16-4

30 of 54

Report Format Version 5.2.1

4.2.3 TEST PROCEDURES a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being
connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded.
NOTE: All modes of operation were investigated and the worst-case emissions are reported.
4.2.4 DEVIATION FROM TEST STANDARD No deviation.

Report No.: RF150324C16-4

31 of 54

Report Format Version 5.2.1

4.2.5 TEST SETUP

40cm

Vertical Ground Reference Plane
EUT

Test Receiver

LISN

80cm

Horizontal Ground Reference Plane

Note: 1.Support units were connected to second LISN.

2.Both of LISNs (AMN) are 80 cm from EUT and at least 80

cm

from other units and other metal planes

support. units.

For the actual test configuration, please refer to the attached file (Test Setup Photo).

4.2.6 EUT OPERATING CONDITIONS Same as section 4.1.6.

Report No.: RF150324C16-4

32 of 54

Report Format Version 5.2.1

4.2.7 TEST RESULTS CONDUCTED WORST-CASE DATA MODE A
Frequency Range 150kHz ~ 30MHz

Input Power Tested by

120Vac, 60Hz Toby Tian

Detector Function & Resolution Bandwidth Environmental Conditions
Test Date

Quasi-Peak (QP) / Average (AV), 9kHz
25, 65%RH 2015/5/14

Phase Of Power : Line (L)

Frequency Correction Reading Value Emission Level

No

Factor

(dBuV)

(dBuV)

(MHz)

(dB)

Q.P. AV. Q.P.

AV.

Limit (dBuV) Q.P. AV.

1 0.15969

0.05 44.62 26.89 44.67 26.94 65.48 55.48

2 0.17374

0.05 42.37 25.42 42.42 25.47 64.78 54.78

3 0.20350

0.06 38.72 25.27 38.78 25.33 63.47 53.47

4 0.41197

0.06 39.33 31.83 39.39 31.89 57.61 47.61

5 0.57924

0.07 37.58 27.24 37.65 27.31 56.00 46.00

6 1.33864

0.09 37.38 28.85 37.47 28.94 56.00 46.00

Remarks:

1. Q.P. and AV. are abbreviations of quasi-peak and average individually.

2. The emission levels of other frequencies were very low against the limit.

3. Margin value = Emission level ­ Limit value

4. Correction factor = Insertion loss + Cable loss

5. Emission Level = Correction Factor + Reading Value

Margin (dB)
Q.P. AV. -20.81 -28.54 -22.35 -29.30 -24.69 -28.14 -18.22 -15.72 -18.35 -18.69 -18.53 -17.06

Report No.: RF150324C16-4

33 of 54

Report Format Version 5.2.1

Frequency Range 150kHz ~ 30MHz

Input Power Tested by

120Vac, 60Hz Toby Tian

Detector Function & Resolution Bandwidth Environmental Conditions
Test Date

Quasi-Peak (QP) / Average (AV), 9kHz
25, 65%RH 2015/5/14

Phase Of Power : Neutral (N)

Frequency Correction Reading Value Emission Level

No

Factor

(dBuV)

(dBuV)

(MHz)

(dB)

Q.P. AV. Q.P.

AV.

Limit (dBuV) Q.P. AV.

1 0.16569

0.05 39.32 21.97 39.37 22.02 65.17 55.17

2 0.18519

0.05 36.82 20.57 36.87 20.62 64.25 54.25

3 0.23602

0.05 30.80 19.71 30.85 19.76 62.24 52.24

4 0.40415

0.06 34.79 27.28 34.85 27.34 57.77 47.77

5 0.54518

0.06 32.01 22.95 32.07 23.01 56.00 46.00

6 0.82887

0.07 32.45 22.35 32.52 22.42 56.00 46.00

Remarks:

1. Q.P. and AV. are abbreviations of quasi-peak and average individually.

2. The emission levels of other frequencies were very low against the limit.

3. Margin value = Emission level ­ Limit value

4. Correction factor = Insertion loss + Cable loss

5. Emission Level = Correction Factor + Reading Value

Margin (dB)
Q.P. AV. -25.80 -33.15 -27.38 -33.63 -31.38 -32.47 -22.92 -20.43 -23.93 -22.99 -23.48 -23.58

Report No.: RF150324C16-4

34 of 54

Report Format Version 5.2.1

MODE B Frequency Range

150kHz ~ 30MHz

Input Power Tested by

120Vac, 60Hz Toby Tian

Detector Function & Resolution Bandwidth Environmental Conditions
Test Date

Quasi-Peak (QP) / Average (AV), 9kHz
25, 65%RH 2015/5/14

Phase Of Power : Line (L)

Frequency Correction Reading Value Emission Level

No

Factor

(dBuV)

(dBuV)

(MHz)

(dB)

Q.P. AV. Q.P.

AV.

Limit (dBuV) Q.P. AV.

1 0.39635

0.06 39.74 31.16 39.80 31.22 57.93 47.93

2 0.46669

0.06 37.58 28.97 37.64 29.03 56.57 46.57

3 0.59183

0.07 37.68 27.98 37.75 28.05 56.00 46.00

4 1.30736

0.09 37.51 28.78 37.60 28.87 56.00 46.00

5 2.21471

0.13 35.88 27.30 36.01 27.43 56.00 46.00

6 4.97885

0.23 35.28 27.21 35.51 27.44 56.00 46.00

Remarks:

1. Q.P. and AV. are abbreviations of quasi-peak and average individually.

2. The emission levels of other frequencies were very low against the limit.

3. Margin value = Emission level ­ Limit value

4. Correction factor = Insertion loss + Cable loss

5. Emission Level = Correction Factor + Reading Value

Margin (dB)
Q.P. AV. -18.13 -16.71 -18.93 -17.54 -18.25 -17.95 -18.40 -17.13 -19.99 -18.57 -20.49 -18.56

Report No.: RF150324C16-4

35 of 54

Report Format Version 5.2.1

Frequency Range 150kHz ~ 30MHz

Input Power Tested by

120Vac, 60Hz Toby Tian

Detector Function & Resolution Bandwidth Environmental Conditions
Test Date

Quasi-Peak (QP) / Average (AV), 9kHz
25, 65%RH 2015/5/14

Phase Of Power : Neutral (N)

Frequency Correction Reading Value Emission Level

No

Factor

(dBuV)

(dBuV)

(MHz)

(dB)

Q.P. AV. Q.P.

AV.

Limit (dBuV) Q.P. AV.

1 0.15000

0.05 30.86 19.97 30.91 20.02 66.00 56.00

2 0.31432

0.06 32.26 23.13 32.32 23.19 59.86 49.86

3 0.39635

0.06 34.86 27.68 34.92 27.74 57.93 47.93

4 0.45889

0.06 34.04 26.36 34.10 26.42 56.71 46.71

5 0.59002

0.07 35.54 27.66 35.61 27.73 56.00 46.00

6 0.70580

0.07 34.16 24.26 34.23 24.33 56.00 46.00

Remarks:

1. Q.P. and AV. are abbreviations of quasi-peak and average individually.

2. The emission levels of other frequencies were very low against the limit.

3. Margin value = Emission level ­ Limit value

4. Correction factor = Insertion loss + Cable loss

5. Emission Level = Correction Factor + Reading Value

Margin (dB)
Q.P. AV. -35.09 -35.98 -27.54 -26.67 -23.01 -20.19 -22.61 -20.29 -20.39 -18.27 -21.77 -21.67

Report No.: RF150324C16-4

36 of 54

Report Format Version 5.2.1

4.3 6dB BANDWIDTH MEASUREMENT
4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz.
4.3.2 TEST SETUP

EUT

10dB ATTENUATION PAD

SPECTRUM ANALYZER

4.3.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument.
4.3.4 TEST PROCEDURE a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW)  3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with
the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission
4.3.5 DEVIATION FROM TEST STANDARD No deviation.
4.3.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually.

Report No.: RF150324C16-4

37 of 54

Report Format Version 5.2.1

4.3.7 TEST RESULTS 802.11b

CHANNEL

FREQUENCY (MHz)

6dB BANDWIDTH MINIMUM LIMIT

(MHz)

(MHz)

1

2412

8.55

0.5

6

2437

8.11

0.5

11

2462

8.55

0.5

PASS / FAIL PASS PASS PASS

802.11g CHANNEL 1 6 11

FREQUENCY 6dB BANDWIDTH MINIMUM LIMIT

(MHz)

(MHz)

(MHz)

2412

16.38

0.5

2437

16.41

0.5

2462

16.13

0.5

PASS / FAIL PASS PASS PASS

802.11n (20MHz) CHANNEL 1 6 11

FREQUENCY 6dB BANDWIDTH MINIMUM LIMIT

(MHz)

(MHz)

(MHz)

2412

17.61

0.5

2437

17.63

0.5

2462

17.33

0.5

PASS / FAIL PASS PASS PASS

Report No.: RF150324C16-4

38 of 54

Report Format Version 5.2.1

SPECTRUM PLOT OF WORST VALUE

802.11b

802.11g

802.11n (20MHz)

Report No.: RF150324C16-4

39 of 54

Report Format Version 5.2.1

4.4 CONDUCTED OUTPUT POWER
4.4.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT For systems using digital modulation in the 2400­2483.5 MHz bands: 1 Watt (30dBm)
4.4.2 TEST SETUP

EUT

10dB ATTENUATION PAD

Power Sensor

Power Meter

4.4.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument.
4.4.4 TEST PROCEDURES A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the peak power level.
4.4.5 DEVIATION FROM TEST STANDARD No deviation.
4.4.6 EUT OPERATING CONDITIONS Same as section 4.3.6.

Report No.: RF150324C16-4

40 of 54

Report Format Version 5.2.1

4.4.7 TEST RESULTS

802.11b

CHANNEL

FREQUENCY (MHz)

1

2412

6

2437

11

2462

PEAK POWER (mW)
114.02 121.62 112.46

PEAK POWER (dBm)
20.57 20.85 20.51

LIMIT (dBm) PASS / FAIL

30

PASS

30

PASS

30

PASS

802.11g CHANNEL
1 6 11

FREQUENCY (MHz)
2412 2437 2462

PEAK POWER (mW)
192.31 224.39 182.39

PEAK POWER (dBm)
22.84 23.51 22.61

LIMIT (dBm) PASS / FAIL

30

PASS

30

PASS

30

PASS

802.11n (20MHz)

CHANNEL

FREQUENCY (MHz)

1

2412

6

2437

11

2462

PEAK POWER (mW)
195.88 239.33 185.78

PEAK POWER (dBm)
22.92 23.79 22.69

LIMIT (dBm) PASS / FAIL

30

PASS

30

PASS

30

PASS

Report No.: RF150324C16-4

41 of 54

Report Format Version 5.2.1

4.5 POWER SPECTRAL DENSITY MEASUREMENT
4.5.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm.
4.5.2 TEST SETUP

EUT

10dB ATTENUATION PAD

SPECTRUM ANALYZER

4.5.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument.
4.5.4 TEST PROCEDURE a. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. b. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. c. Use the peak marker function to determine the maximum power level in any 100 kHz band segment
within the fundamental EBW.
4.5.5 DEVIATION FROM TEST STANDARD No deviation.
4.5.6 EUT OPERATING CONDITION Same as section 4.3.6.

Report No.: RF150324C16-4

42 of 54

Report Format Version 5.2.1

4.5.7 TEST RESULTS

802.11b

CHANNEL

FREQUENCY (MHz)

1

2412

6

2437

11

2462

802.11g CHANNEL 1 6 11

FREQUENCY (MHz) 2412
2437
2462

802.11n (20MHz) CHANNEL 1 6 11

FREQUENCY (MHz) 2412
2437
2462

PSD (dBm/3kHz)
-5.53 -4.21 -5.18
PSD (dBm/3kHz)
-8.65 -8.82 -9.78
PSD (dBm/3kHz)
-9.48 -9.79 -10.07

LIMIT (dBm/3kHz)
8 8 8
LIMIT (dBm/3kHz)
8 8 8
LIMIT (dBm/3kHz)
8 8 8

PASS / FAIL PASS PASS PASS
PASS / FAIL PASS PASS PASS
PASS / FAIL PASS PASS PASS

Report No.: RF150324C16-4

43 of 54

Report Format Version 5.2.1

SPECTRUM PLOT OF WORST VALUE

802.11b

802.11g

802.11n (20MHz)

Report No.: RF150324C16-4

44 of 54

Report Format Version 5.2.1

4.6 CONDUCTED OUT OF BAND EMISSION MEASUREMENT
4.6.1 LIMITS OF CONDUCTED OUT OF BAND EMISSION MEASUREMENT Below ­20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth).
4.6.2 TEST SETUP

EUT

10dB ATTENUATION PAD

SPECTRUM ANALYZER

4.6.3 TEST INSTRUMENTS Refer to section 4.1.2 to get information of above instrument.
4.6.4 TEST PROCEDURE MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW  300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment
within the fundamental EBW.
MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW  300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level.
4.6.5 DEVIATION FROM TEST STANDARD No deviation.
4.6.6 EUT OPERATING CONDITION Same as section 4.3.6.

Report No.: RF150324C16-4

45 of 54

Report Format Version 5.2.1

4.6.7 TEST RESULTS The spectrum plots are attached on the following images. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement.

802.11b

CH 1

CH 6

CH 11

Report No.: RF150324C16-4

46 of 54

Report Format Version 5.2.1

CH 1 Band edge

CH 11 Band edge

Report No.: RF150324C16-4

47 of 54

Report Format Version 5.2.1

802.11g

CH 1 CH 6 CH 11

Report No.: RF150324C16-4

48 of 54

Report Format Version 5.2.1

CH 1 Band edge

CH 11 Band edge

Report No.: RF150324C16-4

49 of 54

Report Format Version 5.2.1

802.11n (20MHz)

CH 1

CH 6

CH 11

Report No.: RF150324C16-4

50 of 54

Report Format Version 5.2.1

CH 1 Band edge

CH 11 Band edge

Report No.: RF150324C16-4

51 of 54

Report Format Version 5.2.1

5. PHOTOGRAPHS OF THE TEST CONFIGURATION
Please refer to the attached file (Test Setup Photo).

Report No.: RF150324C16-4

52 of 54

Report Format Version 5.2.1

6. INFORMATION ON THE TESTING LABORATORIES

We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following:

Linko EMC/RF Lab: Tel: 886-2-26052180 Fax: 886-2-26051924

Hsin Chu EMC/RF/Telecom Lab: Tel: 886-3-5935343 Fax: 886-3-5935342

Hwa Ya EMC/RF/Safety Lab: Tel: 886-3-3183232 Fax: 886-3-3270892

Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com

The address and road map of all our labs can be found in our web site also.

Report No.: RF150324C16-4

53 of 54

Report Format Version 5.2.1

7. APPENDIX A ­ MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB
No any modifications are made to the EUT by the lab during the test.
---END---

Report No.: RF150324C16-4

54 of 54

Report Format Version 5.2.1


Microsoft Office Word 2007