Air by Quirky Quick Start Guide

Welcome

Congratulations on your new Air by Quirky speakers! This guide will help you get started listening to your favorite music like never before. It contains essential information about your new speakers.

What's Inside

• 1 AirBase Bluetooth® Speaker
• 4 AirConnect Bluetooth® Speakers
• USB Charging Cable
• Quick Start Guide
• Aux Cable

Key Features

• Wireless music playback on up to 5 speakers from the AirBase (up to 75' range).
• Speakers can work together or on their own as Bluetooth® speakers.
• Portable design for music on the go.
• IPX4 water resistance (splash-proof).
• Works through most home walls.
• Rechargeable; speakers charge from a single cable when connected.

Safety Instructions

Please adhere to the following safety guidelines:

• Keep the unit away from heat sources, direct sunlight, humidity, water, and other liquids.
• Do not operate if exposed to water or liquids to prevent electric shock, explosion, or injury.
• Do not use if dropped or damaged. Repairs should only be performed by qualified electricians.
• Do not puncture or damage the product's exterior.
• Keep the unit free from dust and lint.
• Use only for its intended purpose.
• This product is not a toy; keep out of reach of children.
• Avoid using speakers at excessive volumes to prevent hearing damage.
• Do not expose batteries to excessive heat (e.g., direct sunlight, open flame).

Charging Your Speakers

Before initial use, charge your speakers for approximately four hours. When speakers are connected, you can plug the USB cable into any micro USB port to charge them all simultaneously.

Enjoying Your Speakers

For optimal performance, keep your AirBase within 32 feet of your smart device. Ensure Bluetooth® is enabled on your device before starting the pairing process.

Pairing the AirBase Speaker

1. Turn on Speakers: Press the power button. If speakers are connected, pressing one powers them all on. If separated, power each one individually. A green light on the back of each speaker indicates they are on and connected.

2. Initiate Pairing: Connect your AirBase to your Bluetooth®-enabled device. You will hear a voice prompt indicating "pairing mode."

3. Connect Device: On your smartphone or tablet, select "Air" from the list of nearby devices. A voice prompt will confirm successful pairing.

4. Position Speakers: You can now separate the speakers and place them as desired, ensuring they remain within 75 feet of the AirBase.

Disclaimer: Wireless connection range may be affected by interference or thick walls.

Using AirConnect Speakers Independently

You can pair each AirConnect speaker to its own Bluetooth® source to use as a separate speaker. Follow these steps:

1. Prepare Speaker: With the speaker off, press and hold the power button until you hear a chime, then a beep.

2. Enter Bluetooth Mode: Press the power button again. The indicator light will turn blue.

3. Pair Device: On your smartphone or tablet, select "Air Left" or "Air Right" from the list of nearby devices. Another beep will confirm pairing.

Disclaimer: Both left and right speakers share the same pairing names. Some devices may not allow pairing if a speaker with the same name is already connected. You may need to delete the pairing name and retry.

Connecting to Other Audio Systems

You can connect the Air speakers to an alternate audio system (e.g., home theater, TV) by plugging an audio cable into the "OUT" jack on the Air speaker and the "line in" port of your audio system.

Connection Lost Troubleshooting

• If pairing fails, turn the speakers off and repeat the pairing steps.
• Ensure your speakers are within range of your smart device.
• A long beep or voice prompt indicating low battery may cause connection loss. Recharge your speakers.
• Always use the enclosed USB cable for charging.

Pairing Additional AirConnect Speakers

Expand your sound system by adding up to 75 more AirConnect speakers to your AirBase. Simply connect an extra AirConnect speaker to the AirBase to expand your sound.

Disconnecting an AirConnect Speaker from AirBase

Air offers flexibility in how you listen. To disconnect an AirConnect speaker from its current AirBase and prepare it for pairing with another:

1. Turn off speaker: Power off your AirConnect speaker.

2. Reset Speaker: Press and hold the power button for 10-15 seconds. The speaker will power on, then power off. Continue holding until it powers off completely.

3. Ready for New Pairing: Your AirConnect speaker is now disconnected and ready to be paired with any AirBase.

Specifications

Warranty Information

The Air By Quirky One-Year Limited Warranty is a voluntary manufacturer's warranty. It provides rights separate from consumer law rights, and does not exclude, limit, or suspend a buyer's rights arising from consumer law. Consumers can choose to claim service under this warranty or their consumer law rights.

This warranty covers defects in materials and workmanship for ONE (1) YEAR from the original retail purchase date when used according to the startup guide. Air By Quirky may, at its option, repair the product using new or equivalent parts, or exchange the product with a functionally equivalent one. This warranty excludes normal depletion of consumable parts like batteries (unless failure is due to defect), and damage from abuse, accidents, modifications, or unauthorized repairs.

Limitations of liability in this warranty do not apply to death or personal injury due to product liability, fraud, fraudulent misrepresentation, intentional misconduct, gross negligence, or culpable breach of major contractual obligations. Claims for damages based on breach of contract or gross negligence are limited to foreseeable damages typical for the sale contract.

Proof of purchase may be required. For questions or assistance, contact help@airaudio.co.

Important Warnings

• Keep away from water and moisture.
• Keep away from heat sources.
• Do not disassemble the product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.