Shenzhen Amazwear Technology CO., LTD. MAGICP10 KOSPET MAGIC P10 2BEH2-MAGICP10 2BEH2MAGICP10 magicp10
Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501S54725E-RF-00B RF EXPOSURE EVALUATION RF EXPOSURE Applicable Standard According to FCC §2.1093 and §1.1307(b) (1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission's guideline. According to KDB 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [f(GHz)] 3.0 for 1-g SAR and 7.5 for 10-g extremity SAR, where 1. f(GHz) is the RF channel transmit frequency in GHz. 2. Power and distance are rounded to the nearest mW and mm before calculation. 3. The result is rounded to one decimal place for comparison. 4. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test Exclusion. Measurement Result For worst case: Mode Frequency (MHz) Max tune-up conducted power#(dBm) Max tune-up conducted power#(mW) Distance Calculated Threshold SAR Test (mm) value (1-g SAR) Exclusion Bluetooth 2402-2480 8.0 Result: Compliant 6.31 5 2.0 3.0 Yes TR-EM-RF001 Page 12 of 84 Version 3.0Acrobat Distiller 9.0.0 (Windows)